Ameta S20 Pro Drone User Manual

1. Introduction

The Ameta S20 Pro is a high-performance drone designed for aerial photography and videography. It combines advanced flight technology with a user-friendly interface.

Package Contents

• Ameta S20 Pro Drone
• Remote Controller
• Intelligent Flight Battery
• Propellers (4x)
• Battery Charger
• USB-C Cable
• User Manual

2. Safety Guidelines

Important: Always prioritize safety when operating the Ameta S20 Pro. Read and understand all safety precautions before flight.

General Safety Precautions

• Operate only in clear weather conditions.
• Maintain visual line of sight with the drone at all times.
• Avoid flying near people, animals, or property.
• Do not fly in restricted airspace (e.g., near airports, government buildings).
• Ensure the drone battery is fully charged before each flight.
• Check for any damage to the drone or propellers before flight.

Battery Safety

• Use only the official Ameta charger.
• Do not charge the battery immediately after flight; allow it to cool down.
• Store batteries in a cool, dry place.
• Do not disassemble or puncture the battery.

3. Getting Started

Charging the Battery

Connect the battery to the charger using the provided cable. The indicator lights will show the charging status. A full charge typically takes [number] hours.

Installing Propellers

Attach propellers to the motor arms. Ensure propellers are correctly matched to their designated motors (e.g., clockwise and counter-clockwise). They should click into place securely.

Preparing the Remote Controller

Ensure the remote controller is charged. Insert a mobile device into the holder if using the Ameta app for advanced features.

4. Remote Controller

The Ameta S20 Pro remote controller features intuitive controls for flight and camera operation.

Controller Layout

• Left Control Stick: Controls altitude and yaw (rotation). [Up arrow] for ascend, [Down arrow] for descend, [Left arrow] for yaw left, [Right arrow] for yaw right.
• Right Control Stick: Controls horizontal movement. [Up arrow] for forward, [Down arrow] for backward, [Left arrow] for move left, [Right arrow] for move right.
• Power Button: Turns the remote controller on/off.
• Return-to-Home (RTH) Button: Initiates automatic return to the takeoff point.
• Camera Controls: Buttons for taking photos and recording videos.
• Gimbal Dial: Adjusts the camera tilt angle.

Mobile App

Download the Ameta Fly app from your device's app store to access advanced features such as live video feed, flight settings, and intelligent flight modes.

5. Flight Operation

Pre-Flight Checklist

• Drone and controller batteries are charged.
• Propellers are securely attached.
• GPS signal is strong.
• Clear flight path and takeoff area.

Takeoff

Place the drone on a flat, open surface. Power on the remote controller and then the drone. Wait for the drone to acquire a GPS lock. Push the left control stick up gently to take off.

Basic Flight

Use the control sticks to maneuver the drone. Practice hovering and gentle movements before attempting more complex maneuvers.

Landing

Bring the drone back to the takeoff area. Gently pull the left control stick down until the drone lands. Hold the stick down until the motors stop.

Return-to-Home (RTH)

The RTH function automatically brings the drone back to its takeoff point. It can be activated manually or if the drone loses connection with the controller or its battery is low.

6. Camera and Gimbal

Camera Operation

Use the dedicated buttons on the remote controller to capture photos or start/stop video recording. The camera settings can be adjusted via the Ameta Fly app.

Gimbal Control

The gimbal dial allows you to smoothly adjust the camera's tilt angle during flight, enabling cinematic shots.

Data Storage

Insert a compatible microSD card into the drone's card slot to save photos and videos. Refer to the specifications for compatible card types and sizes.

7. Specifications

Note: Specifications are subject to change without notice.

8. Troubleshooting

Common Issues and Solutions

• Drone not powering on: Ensure the battery is properly inserted and charged.
• Cannot connect to controller: Ensure both devices are powered on and within range. Try re-pairing.
• Unstable flight: Check for strong winds, ensure propellers are correctly installed, and verify GPS signal strength.
• Camera not responding: Check if the microSD card is inserted correctly and formatted. Restart the drone and controller.

9. Maintenance and Care

Cleaning

Gently clean the drone and propellers with a soft, dry cloth. Avoid using liquids or solvents.

Storage

Store the drone and accessories in a cool, dry place, away from direct sunlight. For long-term storage, discharge the battery to approximately 50-60%.