MiraScreen M932 Manual

Introduction

MiraScreen is a powerful WiFi display receiver product. It features an integrated advanced WiFi 802.11 b/g/n for both 2.4Ghz, allowing a switch to prevent the traditional 2.4Ghz channel crowded problem. It supports Miracast for Android/Windows and AirPlay for iOS devices. Users can also use 3rd party DLNA apps to work with it.

Hardware Installation

The MiraScreen device connects to a display via HDMI and is powered by a USB connection. A power adapter is recommended for the USB power source.

Note: Due to the 802.11 b/g/n WiFi module consuming more power, it is recommended to use a power adapter with at least 1Amp supply (5V1A adapter is recommended).

Hardware Feature:

• AirPlay/Miracast button: Allows switching between AirPlay or Miracast Mode on the fly.

AirPlay Mirror

Ensure your device is booted and in AirPlay/DLNA mode.

iOS:

1. Open WiFi settings and connect to the MiraScreen network (e.g., MiraScreen-xxxxxxxx).
2. Swipe up to access the Control Center and find AirPlay.
3. Select the MiraScreen device from the AirPlay list.
4. Enable mirroring. The screen will be projected wirelessly.

Mac:

1. Find the MiraScreen network (e.g., MiraScreen-xxxxxxxx) in the WiFi list.
2. Open AirPlay and select the MiraScreen device. The screen will be mirrored.

Miracast

Ensure your device is booted and switched to Miracast mode.

Android:

1. Open Miracast settings (usually found in Display settings) and turn it on.
2. Find the MiraScreen device and connect. The screen will be mirrored.

*Some devices may require a PIN code before Miracast mirror. Please check the PIN code shown on the MiraScreen device.

Windows Phone 8.1:

1. Open settings and select 'project my screen'.
2. Find the MiraScreen device (e.g., MiraScreen-xxxxxxxx) and tap to connect. The screen will start projecting.

Windows PC:

1. Go to 'PC and devices', select 'Device', and add a new device.
2. Find the MiraScreen device (e.g., MiraScreen-xxxxxxxx) and select it.
3. Once the connection is established, your screen will be mirrored.

Settings

After connecting to the MiraScreen WiFi, you can access settings by opening a web browser and entering the IP address: 192.168.203.1.

The following setting functions are available:

• Internet: Set up MiraScreen to link with your home router for internet surfing. (Note: Your mobile device connection to MiraScreen may disconnect when linking to the home router for the first time).
• Language: Select from multiple languages.
• Password: Change the default WiFi password.
• Default Mode: Select AirPlay or Miracast as the default mode after booting.
• Resolution: Set up the output resolution (e.g., 1280x720_60P).
• Upgrade: Perform the latest firmware upgrade. (Note: This requires an internet connection).