Introduction
Thank you for purchasing the Nokia FastMile 5G Gateway 3. This guide provides comprehensive instructions on operating the gateway to achieve optimal performance from your 4G/LTE or 5G network. The contents of this guide are subject to change without notice.
Getting to Know Your FastMile 5G Gateway 3
The package includes the FastMile 5G Gateway 3, a power adapter, a Quick Start Guide (QSG), a warranty card, and a safety card. The gateway connects to the 4G/LTE or 5G mobile network (WAN-side) and provides Nokia Wi-Fi connectivity (LAN-side).
The FastMile 5G Gateway 3 supports 5G NR and 4G LTE WAN connectivity, compliant with 3GPP Rel-15 standards. It offers dual connectivity EN-DC when both 4G and 5G are available, enhancing download and upload speeds for services like internet browsing and video streaming. If 5G NR coverage is unavailable, the device can operate using 4G LTE only.
Key features include:
- 4G and 5G WAN connection
- 4G/LTE multi-band omni-directional antenna connectivity
- TEL port for voice service (availability may vary by provider)
- 5G NSA/SA omni-directional and directional antenna connectivity
- Self-contained integrated residential gateway
- Nokia Wi-Fi connectivity (4x4 IEEE 802.11ax 2.4 GHz and 5 GHz, Wi-Fi 5, Wi-Fi 6 support)
- PIN-locked SIM card support
- Temperature sensors
- WebUI configuration for single SSID merging
- Operates in LTE-only, LTE-5G EN-DC, and 5G SA modes.
About the Modes
LTE Only: Utilizes the 4G/LTE network for connection.
LTE-5G EN-DC: Connects simultaneously using a 4G/LTE carrier and a 5G NSA carrier.
5G SA: Connects using the 5G network.
Physical Interfaces
The FastMile 5G Gateway 3 features a SIM card slot and a reset button on the bottom. The front panel includes USB, LAN 1, LAN 2, WAN ports, and an ON/OFF power button.
Networks | Nokia
Nokia Corporation | Nokia
