Klark Teknik PRO DI AV 2 DI 22P

Passive Stereo DI Box with Midas Transformers and Extended Dynamic Range

Product Overview

The Klark Teknik PRO DI AV 2 DI 22P is a passive stereo DI (Direct Injection) box designed to provide a high-quality interface for audio signals. It features Midas transformers and offers an extended dynamic range, suitable for various audio sources including instrument-level, line-level, and speaker-level signals.

Controls and Connectivity

The PRO DI AV 2 DI 22P features comprehensive input and output options for flexible audio routing. The front and rear panels display input connectors, control switches, and output connectors.

Inputs:

Connect your high-impedance source audio to the left and right 1/4" TS jacks, unbalanced RCA jacks, or a single 1/8" TRS jack. Instrument-level, line-level, and even speaker-level sources are accepted.

The connectors not used for receiving the input signal can also act as a loop-through to pass the signal on to other equipment. For example, if a keyboard is connected to the 1/4" inputs, the RCA jacks can connect to an amplifier or personal mixer while the XLR outputs send the signal to the main mixing console.

PAD:

A -15 dB pad can be applied to each channel for very hot signals. This does not affect the level of loop-through connections.

OUTPUTS:

Send the inputs to a mixing console via balanced XLR cables.

EARTH LIFT:

This switch may help reduce unwanted hum by removing the ground connection.

Specifications

Specification	Details
Inputs
Connectors	2 x 1/4" TS, 1/8" TRS, RCA unbalanced
Impedance	30 kΩ
Max. input level	30 dBu @ 1 kHz
Outputs
Connectors	2 x XLR, balanced
Impedance	600 Ω
Max. output level	8.5 dBu @ 1 kHz
System
Frequency response	20 Hz to 30 kHz (±1dB)
THD + N (distortion)	0.01% @ 1 kHz, 0 dBU
Signal-to-noise ratio	105 dBu
Input pad	-15 dB
Power requirement	Passive
Physical
Dimensions (W x D x H)	118 x 112 x 64 mm (4.6 x 4.4 x 2.5")
Weight	0.53 kg (1.2 lbs)

Compliance Information

Federal Communications Commission (FCC)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications to the equipment not expressly approved by Music Tribe can void the user's authority to use the equipment.

CE Marking and EU Compliance

Music Tribe declares that this product is in compliance with relevant EU directives, including 2014/30/EU, 2011/65/EU, and 2012/19/EU. The full text of the EU Declaration of Conformity (DoC) is available at: https://community.musictribe.com/

EU Representative: Music Tribe Brands DK A/S, Address: Ib Spang Olsens Gade 17, DK - 8200 Aarhus N, Denmark.

Legal Disclaimer and Warranty

Music Tribe accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances, and other information are subject to change without notice. All trademarks are the property of their respective owners.

For the applicable warranty terms and conditions and additional information regarding Music Tribe's Limited Warranty, please see complete details online at musictribe.com/warranty.

	Klark Teknik DN100 Active DI Box Quick Start Guide A quick start guide for the Klark Teknik DN100 Active DI Box with Extended Dynamic Range, detailing its controls, specifications, and legal disclaimers.
	Klark Teknik DN4816U Quick Start Guide: Bus-Powered StageConnect Interface Bridge A concise guide to the Klark Teknik DN4816U, a bus-powered StageConnect interface bridge featuring multi-channel USB I/O and Behringer Ultranet I/O. Learn about setup, controls, signal routing, and specifications.
	Klark Teknik Professional Audio Equipment Catalog and Specifications Discover Klark Teknik's extensive range of professional audio processing gear, including loudspeaker processors, equalisers, dynamic processors, and more. Learn about the company's history and commitment to quality audio engineering.
	Klark Teknik 76-KT Quick Start Guide A concise and informative quick start guide for the Klark Teknik 76-KT Classic FET-Style Compressor with Class-A Line Level Amplifier and Midas Transformers.
	Klark Teknik DN32-USB Quick Start Guide A quick start guide for the Klark Teknik DN32-USB, a USB 2.0 expansion module with up to 32 bidirectional channels, providing detailed safety instructions, installation procedures, and PC configuration for Midas M32 consoles.
	Klark Teknik DN9630 AES50 to USB 2.0 Converter Quick Start Guide This document provides a quick start guide for the Klark Teknik DN9630, an AES50 to USB 2.0 converter with up to 48 bidirectional channels. It covers unpacking, installation, connection, and operation of the device, along with important safety instructions.
	KLARK TEKNIK AIR LINK DW 20BR Bluetooth Receiver: Quick Start Guide and Specifications Comprehensive guide to the KLARK TEKNIK AIR LINK DW 20BR Bluetooth receiver, covering controls, setup instructions, connection notes, technical specifications, and FCC compliance information.
	Klark Teknik AIR LINK DW 20R/DW 20T Quick Start Guide A concise guide to setting up and pairing the Klark Teknik AIR LINK DW 20R wireless receiver and DW 20T wireless transmitter for high-performance stereo audio broadcasting. Includes setup instructions, control descriptions, specifications, and compliance information.