Sofirn ST10 Compact EDC Flashlight
A versatile and compact EDC flashlight featuring multiple light modes and convenient operation.
Product Overview
The ST10 is a compact and versatile EDC flashlight featuring a white main light, white side light, and red side light. It comes with a magnetic tail cap and magnetic clip for flexible use in various scenarios. Two separate buttons control the main and side lights for easy operation.
Light Modes and Performance
Main Light
| ANSI/NEMA FL1 Chart | Moon | Low | Medium | High | Turbo | Beacon |
|---|---|---|---|---|---|---|
| Output | 1LM | 10LM | 100LM | 330LM | 1000LM | 1000LM |
| Runtime | 150h | 35h | 4.5h | 1.5h | 1h20min | - |
| Distance | - | 15m | 45m | 85m | 144m | - |
| Intensity | - | 57cd | 500cd | 1800cd | 5175cd | - |
Side White Light
| ANSI/NEMA FL1 Chart | Moon | Low | Medium | High | Turbo | Beacon |
|---|---|---|---|---|---|---|
| Output | - | 7LM | 75LM | 300LM | 500LM | - |
| Runtime | - | 45h | 4h | 1.5h | 1h20min | - |
| Distance | - | 6m | 20m | 42m | 54m | - |
| Intensity | - | 9cd | 100cd | 430cd | 725cd | - |
Side Red Light
| ANSI/NEMA FL1 Chart | Moon | Low | Medium | High | Turbo | Flash |
|---|---|---|---|---|---|---|
| Output | - | 3LM | 45LM | 100LM | - | 100LM |
| Runtime | - | 27h | 1h15min | 1h | - | - |
| Distance | - | - | 19m | 28m | - | - |
| Intensity | - | - | 90cd | 193cd | - | - |
Impact Resistance: 1m / 3.28ft
Water Resistance: IPX6 (Use underwater is not recommended)
Specifications
- Battery Option: 14500 battery, compatible with AA Alkaline battery and AA Ni-MH battery
- Working Voltage: 1.2V-4.2V
- Charging: USB Type-C rechargeable battery
- Material: AL6061-T6 aluminium alloy
- Size: 69.3*33.8*20.4 mm
- Weight: 49g (without battery)
- Protection: Reverse polarity protection from improper battery installation.
? Note: All test data are based on laboratory conditions. Runtime was measured with temperature regulation active, using a 14500 battery with a capacity of 900mAh. Actual performance may vary due to battery condition, temperature, and other environmental factors.
General Operation
The ST10 features distinct controls for the main and side lights. The main light, side white light, and side red light cannot be active simultaneously.
Main Light Switch
- 1 Click: Toggle ON / OFF
- 2 Clicks: Activate Turbo mode or Beacon mode
- Long Press (from ON): Cycle through Low, Medium, High modes
- Long Press (from OFF): Activate Moon mode
Side Light Switch
Controls the white and red side lights.
- White Light:
- 1 Click: Toggle ON / OFF
- Long Press (from ON): Cycle through Low, Medium, High modes
- 2 Clicks (from ON): Activate Turbo mode
- Red Light:
- 1 Click (from ON): Cycle through Low, Medium, High modes
- 2 Clicks (from ON/OFF): Activate Flash mode
? Note: The main light, the side white light, and the side red light will not be on at the same time.
Lock/Unlock Operation
When the flashlight is powered OFF:
- Triple-click: To lock or unlock the flashlight.
When locked, the red light flashes twice to indicate the lock status. ? This prevents accidental activation.
Battery Level Indicator
After turning on the ST10, the indicator will display the power status for 5 seconds. This feature works only when using a 14500 battery.
- Green Constant On: 30%-100% battery remaining
- Red Constant On: 10%-30% battery remaining
- Red Flashes: 1%-10% battery remaining
? Note: When the flashlight is on and the remaining battery is lower than 10%, the red indicator will keep flashing. The flashlight automatically turns off when the battery voltage is lower than 2.8V.
Contact and Support
For refunds or replacements within the warranty period, please contact Sofirn Limited.
Sofirn Limited
Tel: +86-755-23440047
Fax: +86-755-23440141
Web: www.sofirnlight.com, www.sofirn.cn, sofirn.aliexpress.com
E-mail: us@sofirnlight.com, eu@sofirnlight.com, wholesale@sofirn.cn, yx003@sofirn.cn
Warnings
- ⚠️ Do not look directly into the flashlight beam.
- ⚠️ Keep out of reach of children.
- ⚠️ Ensure the battery is installed correctly to avoid damage or leakage.
- ⚠️ Do not expose the flashlight to water or extreme temperatures for prolonged periods.
- ⚠️ Do not use batteries that are not compatible with the flashlight.
- ⚠️ Always remove the batteries if the flashlight will not be used for an extended period.
- ⚠️ Keep the lens clean and free of debris to ensure proper light output.
- ⚠️ Extended use at high brightness will cause significant heat buildup. This is normal operation and not a malfunction.
- ⚠️ When carrying the flashlight, if necessary, enable the lock mode (if available) or slightly loosen the battery compartment to physically cut off the power.
