Screwfix 550mm Side Self-Closing Ball Bearing Drawer Runners

Important Safety Information

? IMPORTANT: These instructions are for your safety. Please read through them thoroughly prior to handling the product and retain them for future reference.

Before You Start

• The length of the drawer box must be 550 mm.
• Note the minimum needed cabinet depth is 4 mm more than the drawer length.

Safety

⚠️ Make sure, the cabinet is standing safely. Eventually, you can fix it to the wall.

Parts

• Part 01: Ball Bearing Slide Member (x1)
• Part 02: Cabinet Member (x1)
• Part 03: Screws (Ø 3.5 x 16 mm) (x16)

Tools You Will Need

• Screwdriver (x1)

Assembly Instructions

Step 1-4: Preparing the Cabinet and Drawer Members

On the inside of your cabinet, mark the location for the drawer slide. Consider the gap between drawer fronts. Draw a line in the middle of the space above the gap. The first drilling hole is 37 mm from the front edge.

Separate the cabinet member from the drawer member by pushing the release lever. Then, fix the drawer members with 3 screws (Ø 3.5 x 16 mm) each.

Extend the slide member and locate the cabinet member along the mark made in step 3. Insert screws through the holes along the cabinet member with five screws each (Ø 3.5 x 16 mm), following the distances shown.

Diagram Description: Shows marking lines on the cabinet interior, drilling holes, attaching slide members to the drawer, and attaching cabinet members to the cabinet frame with specific measurements indicated (e.g., 37 mm from front edge, 64 mm spacing).

Step 5: Inserting the Drawer

Replace the drawer member by sliding it back into the slide member. Take care that the drawer is level while sliding into the cabinet. Ensure that the cabinet members are both at the same height.

Step 6: Dimension Overview

Diagram Description: Provides a detailed overview of dimensions for installation, including slide length (550 mm), cabinet depth requirements (≥ 554 mm total), screw hole spacing, and overall slide dimensions (e.g., 224 mm, 352 mm, 416 mm).

Care & Maintenance

⚙️ General care and maintenance information is provided. Please refer to the full manual for specific details.

Guarantee

? This product has a manufacturer's guarantee of 2 years against manufacturing defects from Kingfisher International Products. This covers normal household use.

To make a claim, present your proof of purchase. The product must be new. This guarantee does not cover wear and tear, misuse, or accidental damage. Ancillary costs are not covered.

If the product is defective, Kingfisher International Products will replace or refund it within a reasonable time. Rights under this guarantee are enforceable in the country of purchase and are in addition to your statutory rights.

For purchases in France, additional legal guarantees apply.

Manufacturer & Contact Information

UK Manufacturer: Kingfisher International Products Limited, 1 Paddington Square, London, W2 1GG, United Kingdom

EU Manufacturer: Kingfisher International Products B.V., Rapenburgerstraat 175E, 1011 VM Amsterdam, The Netherlands

Websites:

• EN: www.diy.com
• EN: www.screwfix.com
• EN: www.screwfix.ie
• FR: www.castorama.fr
• FR: www.bricodepot.fr
• FR: www.screwfix.fr

To view instruction manuals online, visit www.kingfisher.com/products.