LANDI C20Lite POS Terminal User Guide

Contents

• Disclaimer
• Environmental Tips
• Abbreviation Correspondence Chart
• 1. Overview
  • Security Guarantee
  • Configuration of Terminal Series
  • Terminal Working Environment
• 2. Appearance and Interface
• 3. Technical Features, Size, and Weight
  • Technical Features
• 4. Unboxing Inspection
• 5. Installation Guide
  • Installation Environment
  • Ports Cables Installation
• 6. Usage of Terminal
  • Basic Operation of Power on/off the Terminal
  • Usage of Button
  • Usage of USB Port
• 7. Trouble Shooting
• 8. Usage Precautions
• 9. Transportation and Storage
• 10. Other
  • Accessories for separately sell
  • Terminal Maintenance
  • Details for Getting in touch

Disclaimer

• Every effort has been made in the preparation of this User Guide to ensure the accuracy and completeness of its content. However, it cannot be guaranteed that there are no errors or omissions in this manual.
• Fujian LANDI Commercial Equipment Co., Ltd. holds the full copyright of this manual and reserves the right to modify the software, hardware, and/or documentation of this product without prior notice.
• Due to product updates, certain details in this document may not correspond with the actual product. For accurate information, please refer to the physical product. The interpretation rights of this document belong solely to Fujian LANDI Commercial Equipment Co., Ltd.
• Any unauthorized copying, distribution, or use of any part of this manual is strictly prohibited without written permission from Fujian LANDI Commercial Equipment Co., Ltd. The company reserves the right to pursue legal responsibilities according to law for any infringement.
• Fujian LANDI Commercial Equipment Co., Ltd. shall not be held responsible for any damages, malfunctions, data loss or loss of accessories caused by incorrect operations that do not follow the instructions provided in this manual.

Environmental Tips

The environmentally sustainable lifespan of this product is 10 years, subject to the specified climate conditions for normal operation, storage, and transportation as outlined in the product's technical characteristics. Upon reaching its end-of-life stage, we highly recommend returning it along with its packaging to our company.

This form is prepared in accordance with the provisions of SJ/T 11364.

○ : Indicates that the content of the hazardous substance in all homogeneous materials of the part is below the limit requirements specified in GB/T 26572.

× : Indicates that the content of the hazardous substance in at least one homogeneous material of the part exceeds the limit requirements specified in GB/T 26572.

Note:

1. Most of the parts of this product are made of harmless environmental protection materials, and the parts containing harmful substances or elements cannot be replaced by harmful substances due to the limitation of global technological development level.
2. The environmental data for reference are obtained by testing in the normal use and storage environment required by the product, such as humidity and temperature.

Prompt Identifier

⚠️ Warning: This symbol indicates a potential threat to personal safety and property.

✋ Caution: Caution of possible equipment damage due to improper operation.

? Notice: Key areas or important information that should be given special consideration during use or operation.

Abbreviation Correspondence Chart

1. Overview

Terminal Purpose and Features

C20Lite is an advanced POS terminal that incorporates a full touch screen and high-speed communication capabilities. It is specifically designed for indoor usage and caters to merchants in various industries, including catering, entertainment, chain stores, membership programs, offline physical stores of e-commerce businesses, and beauty salons.

As an intelligent cash register terminal, C20Lite showcases cutting-edge software, hardware, and industrial design. Its sleek appearance houses powerful functionalities such as a 4-core 2.0G high-speed CPU, ample memory capacity, a touchscreen LCD display for intuitive operation with multimedia features and user-friendly graphical interfaces.

Additionally, C20Lite supports multiple communication methods including standard WiFi and Bluetooth as well as Ethernet.

Configuration of Terminal Series

Description of C20Lite Terminal Model

Configuration of C20Lite Series Terminal

The C20Lite series offers a diverse range of functional configurations to cater to the varied needs of our customers. Consequently, there are variations in the configuration across different product versions. For detailed information, please reach out to your account manager for confirmation.

Operation Environment

The requirements for the operation and storage transpiration environment:

2. Appearance and Interface

Key Components:

• 1. Main Display: LCD with touch screen.
• 2. Base: The supporting base of the terminal.
• 3. Pillar: Connects the display to the base.
• 4. Speaker: Integrated speaker for audio output.

Ports and Buttons (Rear View):

• 5. Power Button: Button to turn the device on/off.
• 6. TF Card Slot: Slot for TF (TransFlash) memory cards.
• 7. USB Type-A Port: Standard USB port for peripherals.
• 8. RS232: Serial port for specific device connections.
• 9. USB Type-A Port: Another standard USB port.
• 10. 1 Power Supply Port: Port for connecting the power adapter.
• 11. MICRO USB Port: Smaller USB port, often used for debugging or data transfer.
• 12. Audio Jack 3.5mm: Standard audio output/input jack.
• 13. Cashdrawer Port: Port for connecting a cash drawer.
• 14. Ethernet Port: RJ45 port for wired network connection.

3. Technical Features, Size, and Weight

4. Unboxing Inspection

Open the packaging box and carefully inspect the terminal and accessories for any signs of tampering or transportation damage. POS terminals are equipped with built-in security features, rendering them unusable if dismantled.

1. Unpacking the packaging box and check the following items:
   • C20lite Terminal
   • Power Supply
   • Safety, Warranty, Installation Guide
2. Remove all plastic wrapping from the terminal and other accessories.
3. Retain the shipping packaging box and materials for future packing or transporting of the terminal.

5. Installation Guide

6. Usage of Terminal

7. Trouble Shooting

8. Usage Precautions

• Do not use the terminal device in harsh environments such as direct sunlight, high temperatures, humidity, or excessive dust.
• For cleaning the terminal, dampen a clean cloth with a few drops of neutral detergent and avoid using wet cloths. For stubborn stains, alcohol or alcohol-based cleaners can be used. Do not use diluent, trichloroethylene or ketone solvents as these chemicals can damage plastic or rubber components. Avoid spraying cleaning agents or other solutions directly onto the terminal display screen.
• Do not plug or unplug any components (except for USB ports, Ethernet ports, and headphone jacks) while they are powered on as it may damage interface devices.
• Do not hot-swap SIM cards, MicroSD cards, etc.
• After each day's business operations end, please remember to shut down the terminal.
• Terminal should be managed by designated personnel and unfamiliar individuals should not operate it.
• If any of the following abnormal phenomena occur during operation, immediately stop operating it, cut off power supply and promptly report to service provider:
  • 1) hearing sharp noises during operation;
  • 2) accidentally allowing impurities or water into the machine;
  • 3) emitting unpleasant odors during operation

⚠️ Please note that the terminal should be protected from water and dust, therefore it is only intended for indoor use. Any damage caused by rain or dust infiltration is not covered under warranty.

Regulatory Information

FCC Statement

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

ISED RSS Warning/ISED RF Exposure Statement

ISED RSS Warning:

This device complies with Innovation, Science and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'ISED applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

ISED RF exposure statement:

This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Le rayonnement de la classe b respecte ISED fixant un environnement non contrôlés. Installation et mise en œuvre de ce matériel devrait avec échangeur distance minimale entre 20 cm ton corps. Lanceurs ou ne peuvent pas coexister cette antenne ou capteurs avec d'autres.

9. Transportation and Storage

Transportation should be conducted using conventional methods, while avoiding exposure to rain, snow, direct sunlight, and mechanical impact. During handling, utmost care must be taken to prevent dropping or throwing. Measures should be implemented during transportation to avoid compression and packaging damage. The product ought to be stored in its original packaging box.

? Notice: There is a warning on the packaging box regarding transportation. Please follow the instructions during transportation to avoid potential damage to the terminal.

The warehouse must not contain any harmful gases, flammable or explosive materials, or corrosive chemicals. Furthermore, there should be no presence of strong mechanical vibrations, impacts, or intense magnetic fields. The packaging boxes should be positioned at least 15cm above the ground and maintained at a minimum distance of 50cm from walls, heat sources, cold sources, windows or air vents.

10. Other