Outsunny Galvanized Raised Garden Bed Kit – Use and Care Manual

Unpack Components: Lay out all parts, including metal side panels, corner connectors, and the protective rubber edging. Ensure all pieces are intact before starting.

Connect Panels: Align the metal side panels with the corner connectors. Slide the panels into the grooves of the corners until they fit snugly—no tools required for basic assembly.

Attach Safety Edging: Press the protective rubber seal along the top edges of the panels, ensuring it covers all sharp edges completely. This creates a safe, smooth surface for handling.

Final Check: Confirm all panels are securely connected and the bed is stable. Adjust as needed to ensure the structure is square and level before adding soil.

Location Setup: Place the garden bed in an outdoor area with adequate sunlight (6–8 hours daily for most vegetables and flowers). Ensure the surface is flat to prevent tipping.

Soil Preparation: Fill the bed with high-quality potting soil or garden soil mixed with compost. Leave a 1-inch gap from the top to avoid overflow when watering.

Plant Selection: Ideal for herbs (basil, mint), vegetables (tomatoes, lettuce), or flowers (marigolds, petunias). Follow spacing guidelines for each plant to allow proper growth.

Planting Depth: Adjust planting depth based on the plant type—shallow roots (herbs) need 4–6 inches, while deeper roots (tomatoes) may use the full 16.5-inch height.

Watering: Water plants when the top 1–2 inches of soil feel dry. The open bottom allows excess water to drain naturally, so avoid overwatering—this prevents root rot and keeps soil healthy.

Weeding: Remove weeds regularly to reduce competition for nutrients. The elevated design makes weeding easier, minimizing bending or kneeling.

Harvesting: Use gentle hands when harvesting to avoid damaging plants or the bed's edges. The rubber edging protects hands during frequent access.

Cleaning: Rinse the bed with water periodically to remove dirt or debris. For stubborn grime, use a soft brush and mild soap, then rinse thoroughly—avoid harsh chemicals that may damage the galvanized finish.

Rust Prevention: The galvanized steel resists rust, but inspect for scratches. If damage occurs, touch up with a rust-inhibiting spray (ensure it's plant-safe) to protect the metal.

Seasonal Care: In winter, empty soil if storing outdoors to prevent freezing damage. For year-round use, add a layer of mulch to insulate roots in cold weather.

Modular Expansion: To expand, connect additional kits by aligning panels and corners. Ensure all edges are covered with safety edging to maintain a safe design.

Do not stand or sit on the garden bed—excess weight may bend the panels.

Keep the rubber edging intact; replace if damaged to prevent exposure to sharp metal edges.

When moving the bed, lift from the bottom edges (not the sides) to avoid bending panels.

Keep away from excessive moisture in enclosed spaces (e.g., garages) to preserve the galvanized finish.