Q08 Motorcycle Bluetooth Intercom - Quick Manual Instruction

Product Overview

The Q08 is a versatile Bluetooth intercom system designed for motorcycle riders. It offers features for music playback, phone calls, voice assistant, and intercom communication.

Key Components:

• Q08 Host
• Speaker Microphone
• Clip-on Base
• Velcro Installation Package
• Type-C Charging Cable
• Instruction Manual

Device Layout:

• Power on/off button: Press and hold for 3 seconds to turn on/off. Double-click to switch between Chinese and English voice broadcasts.
• Play/Pause button: Short press to play or pause music.
• Answer/Hang up button: Short press to answer or hang up calls.
• Volume down button: Short press for previous song, long press to decrease volume.
• Volume up button: Short press for next song, long press to increase volume.
• Voice Assistant button: Wake up the voice assistant.
• LCD Display Screen: Shows status like battery, Bluetooth connection, volume, FM signal, and temperature (°C/°F).
• Charging Port: Type-C charging port.
• Bluetooth Work Indicator/Charging Indicator: Red light for charging, green light for Bluetooth status.
• Speaker/Microphone Interface
• Mode button: Long press to switch between FM and Bluetooth modes. Short press to mute or play in FM mode.

Music Features

• Play/Pause: Short press the Power/Play/Pause button.
• Next Song: Short press the Volume Up button.
• Previous Song: Short press the Volume Down button.
• Volume Up: Long press the Volume Up button.
• Volume Down: Long press the Volume Down button.

Phone Features

• Answer Call: Short press the Answer/Hang up button when there's an incoming call.
• Refuse Call: Press and hold the Answer/Hang up button for 2 seconds during an incoming call.
• End Call: Short press the Answer/Hang up button during a call.
• Redial Last Number: Double-click the Answer/Hang up button.
• Manual/Auto Answering: Double-click the Answer/Hang up button to switch between manual and automatic answering (default is automatic after 10 seconds).

Voice Assistant

Press the Voice Assistant button to activate your phone's voice assistant (e.g., Siri, Google Assistant).

Intercom Pairing

Initial Pairing:

• Turn on both devices.
• Short press the intercom button on one device to enter pairing mode (prompt tone: "intercom pairing").
• Once paired successfully, a prompt tone "intercom connection" and a "dong" sound will be heard. The intercom indicator light will stay on.

Connecting with a Phone's Bluetooth:

• If the device is already connected to a phone via Bluetooth, disconnect the phone's Bluetooth first.
• Then, short press the intercom button to enter intercom mode.
• After successful intercom pairing, connect your phone via Bluetooth.

Intercom Reconnection: If both devices were previously paired, they will automatically reconnect when turned on.

Connecting to a Third-Party Headset:

• Turn on both Q08 devices without phone Bluetooth connection.
• Turn on the third-party Bluetooth headset.
• Initiate connection from the Q08 devices. A "dong" sound indicates successful connection.

Intercom Reset (Clear Pairing): With no Bluetooth or intercom connection, press and hold both volume buttons simultaneously for 5 seconds until a "Dong" sound is heard to restore factory settings.

FM Radio

• Switch Modes: Long press the Mode button to switch to FM mode.
• Scan Stations: Short press the Up or Down buttons to scan for saved stations. Short press the Play/Pause button for auto-scan (stations will be saved automatically).
• Mute/Play: Short press the Mode button.

EQ Sound Modes

Long press the Mode button to cycle through 6 EQ sound modes: POP, ROCK, JAZZ, CLASS, COUN (Country), NATURAL.

Charging Mode

• Connect the Type-C charging cable to the device.
• The red charging indicator light will be solid while charging.
• The red light will turn off when fully charged. The device will automatically shut down when charging if it was turned on.

Important Notes & Warnings

• Adjust speaker position in the helmet for optimal sound quality.
• Do not expose the product to open flames.
• Do not disassemble the product.
• Avoid contact with sharp objects.
• Store in a dry place when not in use for extended periods.

FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.