IKEA OLOV Adjustable Leg
Assembly Instructions
Product Overview
The IKEA OLOV adjustable leg is designed for furniture, offering flexibility in height adjustment. This guide details its assembly and maintenance.
Brand: IKEA
Model: OLOV
Assembly Instructions
Step 1: Attaching the Leg Plate
You will need a screwdriver and the provided screws (108443). Attach the leg plate (104217) to the tabletop using 5 screws (108443). Ensure the screws are of the correct length (25mm / 1") and not too long (24mm / 7/8").
Diagram Description: A person is shown holding a screwdriver and a screw, pointing towards a tabletop. Another diagram shows a close-up of screws being inserted into a surface, with one illustration showing the correct screw length (25mm) and another showing an incorrect, too-long screw (24mm) with a prohibition symbol.
Step 2: Connecting the Leg
Screw the adjustable leg into the attached leg plate. A circular arrow indicates the screwing motion.
Diagram Description: A leg component is shown being screwed into the leg plate that was previously attached to a surface.
Step 3: Adjusting the Height
The leg can be adjusted to a height between 60-90cm (23 2/4"-35 2/4"). To adjust, twist the leg to loosen, pull or push to the desired height, and then twist to lock. The diagrams show a hand twisting the leg to adjust its height.
Diagram Description: An illustration shows a table with four adjustable legs. Arrows indicate the legs can be moved up and down. Three close-up diagrams show a hand adjusting the height of a leg by twisting and sliding it.
Maintenance and Stability
For increased stability, retighten the screws about two weeks after assembly. Check the screws periodically (a couple of times per year) to ensure they remain tight.
Hebrew Translation:
כדי להגביר את היציבות, חזקו את הברגים כשבועיים לאחר ההרכבה. בדקו את ההברגה כמה פעמים בשנה וחזקו לפי הצורך.
