User Guide for SATECHI models including: M4, M4 Stand and Hub with NVMe Enclosure, Stand and Hub with NVMe Enclosure, Hub with NVMe Enclosure, NVMe Enclosure

Mac Mini M4 Stand & Hub with NVMe Enclosure - EN

Mac Mini M4 Stand & Hub with NVMe Enclosure - EN

8 days ago — Insert the SSD at a slight angle (35-45°) and ensure it is fully seated in the PCIe slot. Important: This stand is not compatible with SSDs that have.

[PDF] Mac Mini M4 Stand & Hub with NVMe Enclosure - EN

Insert the SSD at a slight angle (35-45°) and ensure it is fully seated in the PCIe slot. Important: This stand is not compatible with SSDs that have.

PDF preview unavailable. Download the PDF instead.

huong-dan-su-dung-hub-satechi-danh-cho-mac-mini-m4 ?srsltid=AfmBOoo6cEsBprOAQiV6HEu86W34CFK7 P0CCG2mSWy8M6Io-3Z4cbEv
QUICK GUIDE
MAC MINI M4 STAND & HUB WITH NVME ENCLOSURE
INSTALLING NVME SSD

1

2

Remove the SSD enclosure cover on the bottom of the stand.
3

Before installing NVMe SSD, first apply the included thermal tape. The side with the blue film should be in contact with the SSD. The clear film adheres to the enclosure.
4

Insert the SSD at a slight angle (35-45°) and ensure it is fully seated in the PCIe slot. Important: This stand is not compatible with SSDs that have pre-installed heat sinks or are double-sided.
5

Secure the SSD using the included screwdriver and screw. Tip: To prevent stripping the screw, do not overtighten.
6

Carefully reattach the enclosure cover: insert the side clips first, then slide the door into place.

Flip the stand back over.

HDMI
7

8
HDMI

Place the stand on a flat surface and use the USB-C cable to connect to your M4 Mac Mini. Supports Mac Mini (M4, 2024). Does not support M2, M1, or 2018 Mac Mini or Mac Studio models.

Easily access the power button through the cutout.

PORTS AND CONNECTORS

9

10

SD 4.0

10Gbps

10Gbps

SD 4.0

10Gbps

10Gbps

USB 2.0

UP TO
312 MB/s
SD 4.0 Card Reader (up to 312 MB/s) High-speed data transfer for SD cards. Insert the card with the label facing up and the pins facing down.

UP TO
10Gbps
Two USB-A 10Gbps (up to 1250 MB/s) Two high-speed data transfer ports for external drives. These ports do not support charging or CD drives, including the Apple SuperDrive.

11

SD 4.0

10Gbps

10Gbps

USB 2.0

UP TO
480Mbps
USB 2.0 Port (up to 60 MB/s) Ideal for low-power devices and peripherals (e.g., USB dongles, wired keyboards). This port does not support charging or CD drives, including the Apple SuperDrive.


Adobe PDF library 17.00 Adobe Illustrator 29.2 (Windows)