SK-GT-88 Wireless Gamepad Quick Installation Guide

Product Overview

Features: High-tech design with Rainbow backlight. Compatible with PS4/PS3/SWITCH/ANDROID/IOS 13/PC and other devices supporting gamepad functionality. Built-in 800mAh battery for ultra-long standby and battery life.

Technical Specifications:

System Requirements:

Compatibility with PS4/PS3/SWITCH/ANDROID/IOS 13/PC.

Safety Notes

• Keep the device dry. Protect from rain, moisture, liquids, and condensation.
• Do not use the product with wet hands.
• Do not use or store the device in dusty or dirty areas.
• Do not store the device at high or low temperatures, as this may cause damage.
• Do not drop or shake the device violently, as this may cause damage.

Usage

Sleep Mode & Reconnection

Sleep Mode: The gamepad automatically enters sleep mode if no operation is performed for 5 minutes.

Reconnection: Press the HOME button to reconnect to the last connected mode.

Power Off: Press and hold the HOME button for approximately 3-5 seconds. The controller will turn off, and all LED indicators will extinguish.

RGB Lighting Control

Press the dedicated button to cycle through lighting modes: RGB breathing effect → static backlight (color cycling stops) → backlight off.

Connectivity Modes

Android V3 Mode (Key Mapping)

Steps:

1. Press A + HOME to turn on the gamepad. LED 1 will flash, waiting for pairing.
2. On your Android device, open Settings and then Bluetooth.
3. Scan for devices, find "GT-88", and tap to pair and connect automatically.
4. Upon successful connection, LED 1 will remain lit.

Button Mapping Configuration

The gamepad has a built-in memory chip allowing players to save button settings for up to 4 different mobile games. Configurations can be switched during gameplay.

For games without official button configurations, custom mapping can be set up.

To customize button mapping:

1. Download and install the "ShootingPlus" app from the Google Play Store.
2. Open the "ShootingPlus" app.
3. Connect the controller to your Android device and open the app.
4. Enter a game, press the "START" button on the controller to bring up the key mapping menu.
5. Drag and drop virtual buttons to match your preferred layout.
6. Click "Save" and then "Close" to enjoy your games.

Note: Pressing the SELECT button in-game shows the current button configuration. Pressing START initiates editing.

Resetting Configuration: Open the app, go to Settings > Advanced Settings > Reset Device.

Note after reset: Disconnect and reconnect the gamepad.

Android Game Controller Mode

1. Press X + HOME to turn on the gamepad. LED 3 will flash, waiting for pairing.
2. On your Android device, open Settings and then Bluetooth.
3. Scan for devices, find "GT-88", and tap to pair and connect automatically.
4. Upon successful connection, LED 3 will remain lit.

Xbox Wireless Controller Mode (Android & iOS 13.0+)

1. Press R1 + HOME to turn on the gamepad. LEDs 1, 2, 3 will flash, waiting for pairing.
2. On your Android/iOS device, open Settings and then Bluetooth.
3. Scan for devices, find "Xbox Wireless Controller", and tap to pair and connect automatically.
4. Upon successful connection, LEDs 1, 2, 3 will remain lit.

MFI Controller Mode (iOS 13.0+)

1. Press B + HOME to turn on the gamepad. LED 4 will flash, waiting for pairing.
2. On your iOS device, open Settings and then Bluetooth.
3. Scan for devices, find "DUALSHORCK4" (or similar MFI identifier), and tap to pair and connect automatically.
4. Upon successful connection, LED 4 will remain lit.

PS4/PS3 Controller Mode

1. Connect the controller to your PS4/PS3 console using the Type-C cable. LEDs 1, 2, 3 will light up upon console recognition.
2. Press the HOME button to initiate pairing with the console. LED 4 will flash.
3. After a few seconds, LED 4 will remain lit. The controller is connected to PS4/PS3.
4. Disconnect the cable for wireless connection.

Switch Controller Mode

Ensure Airplane Mode is OFF on the Switch console before connecting.

1. Turn on the Switch console and navigate to Controller settings.
2. Select "Find Controllers" or "Pairing New Controllers".
3. Press L1 + HOME on the gamepad until 4 LEDs flash, waiting for connection.
4. The controller should automatically connect to the console within 5-7 seconds.

PC Wired Controller Mode (X-Input / D-Input)

Connect the controller to your PC via the Type-C cable. Once recognized by Windows, the controller will function, and LEDs 1, 2, 3 will remain lit.

Switching between X-Input and D-Input: Long-press the HOME button in X-Input mode to switch to D-Input mode.

Turbo/Auto Function

Applicable Buttons: A, B, X, Y, L, ZL, R, ZR.

To Enable/Disable Turbo Speed:

1. Simultaneously press the TURBO button and a function button to activate Turbo speed.
2. Repeat step 1 to deactivate Turbo.

To Adjust Turbo Speed:

Simultaneously press the TURBO button and the directional pad (Up/Down):

• TURBO + Up: Increase Turbo speed.
• TURBO + Down: Decrease Turbo speed.

To Clear Turbo Function: Press and hold the TURBO button for 5 seconds. LEDs 1, 2, 3, 4 will light up and flash with vibration for 1 second, clearing all Turbo functions.

Troubleshooting & FAQ

Resetting the Controller

If the controller disconnects after charging or during gameplay, reset it by pressing the RESET button with a pin.

Common Problems:

• Problem: LED4 does not blink when connected to Switch. Solution: Ensure wired communication mode is disabled in Switch settings if it auto-switches. Turn off Pro Controller Wired Communication in system settings.
• Problem: Joystick gets stuck after extended use. Solution: Firmly press the affected button to resolve the issue.
• Problem: Controller not charging fully. Solution: Turn off RGB lighting. Use a 5V 1A power adapter for charging.
• Problem: Controller not charging. Solution: Ensure ambient temperature is between 2°C and 45°C.
• Problem: Controller cannot be turned off after pressing HOME; RGB lights remain on. Solution: Try pressing the RESET button. If connected via Key Linker app, disable Bluetooth on the mobile device.

General Troubleshooting:

If the gamepad does not vibrate or is not recognized:

• Check if the game supports vibration effects.
• Verify connector integrity.
• Check device connection.
• Check device settings.
• Disconnect and reconnect the device; restart the device.

If the problem persists, contact your local dealer.

General Information

Warranty Terms

Warranty period starts from the date of purchase. Contact the dealer with proof of purchase and explanation of the defect. Unauthorized repairs, modifications, mechanical damage, or misuse void the warranty. The manufacturer is not liable for incidental or consequential damages.

Product Compliance

• Unauthorized repair or disassembly voids the warranty and may damage the product.
• This product is safe and complies with EU requirements.
• Manufactured according to European RoHS standard to reduce electronic waste.
• WEEE symbol (crossed-out bin) indicates proper recycling is required to protect the environment and health.
• CE and FCC compliance statements are included.
• RoHS directive compliance (hazardous substances restriction).