DeepCool GAMMAXX L240 A-RGB Series Liquid CPU Cooler

Product Overview

The GAMMAXX L240 A-RGB Series is a liquid CPU cooler designed by DeepCool. This manual provides detailed installation instructions for various Intel and AMD platforms.

Package Contents

The package includes the following components:

• CPU Cooler Unit
• Radiator
• Fans (x2)
• Intel Mounting Brackets (for LGA1700, LGA1200, LGA115x, LGA2066, LGA2011-v3, LGA2011)
• AMD Mounting Brackets (for AM4)
• Screws and Fasteners (various types and quantities)
• Thermal Paste
• User Manual

Installation Instructions

Follow these steps to install the CPU cooler:

For Intel LGA1700/LGA1200/LGA115x/LGA2066/LGA2011-v3/LGA2011:

1. Attach the appropriate mounting brackets to the motherboard.
2. Apply thermal paste to the CPU.
3. Mount the CPU cooler block onto the CPU and secure it with the provided screws.
4. Attach the fans to the radiator.
5. Mount the radiator to the computer case.
6. Connect the fan and pump cables to the motherboard headers (CPU_FAN, AIO_PUMP).

For AMD AM4:

1. Remove the stock CPU cooler mounting mechanism if necessary.
2. Attach the AMD mounting brackets to the motherboard.
3. Apply thermal paste to the CPU.
4. Mount the CPU cooler block onto the CPU and secure it using the provided clips or screws.
5. Attach the fans to the radiator.
6. Mount the radiator to the computer case.
7. Connect the fan and pump cables to the motherboard headers (CPU_FAN, AIO_PUMP).

Fan and Radiator Connection:

Connect the fan cables to the CPU_FAN or CPU_OPT headers on the motherboard. Connect the AIO pump cable to the AIO_PUMP header. The ARGB lighting can be connected to a compatible motherboard header (e.g., VDG) or a separate controller.

Note: Ensure all connections are secure. Refer to the motherboard manual for specific header locations.

Wiring Diagram

The cooler features a 4-pin PWM fan connector and a 3-pin ARGB connector. The pump is powered via a SATA connector from the PSU.

Connections:

• 4-PIN/CPU_FAN/CPU_OPT: Connects the fan(s) for speed control.
• AIO_PUMP/W_PUMP: Connects the water pump for power.
• VDG (5V D GND): Connects the ARGB lighting for addressable RGB effects.
• PSU SATA: Connects the pump to the power supply unit for power.

Important Information

For more information, please visit the DeepCool website at: www.deepcool.com

Company Information:

• DeepCool USA Inc. 11650 Mission Park Drive Suite 108., Rancho Cucamonga, CA 91730
• Beijing DeepCool Industries Co., Ltd. Building 10, No. 9 Dijin Road, Haidian District, Beijing 100095, China

© 2022 Beijing DeepCool Industries Co., Ltd. All rights reserved.