Hama WiFi Camera

Setup and Operation

It's so simple:

1. Download the Hama Smart Solution app from the Apple App Store or Google Play.
2. Start the Hama Smart Solution app.
3. If you're using it for the first time, register and create a new account. If you already have an account, log in.
4. Connect the WiFi camera to the included USB cable and power supply unit. Plug the power supply unit into a socket.
5. Wait for the camera to emit a signal tone and the LED to flash red.
6. In the app, click '+' in the upper-right corner, select 'Cameras', then '176566'.
7. Confirm that the camera is flashing.
8. Follow the on-screen instructions and scan the QR code. Confirm when you hear an acoustic signal.
9. Enter your WiFi network name and password, and confirm.
10. The camera will connect. The LED will stop flashing and emit a constant blue light upon successful connection.
11. You can now set up, control, and configure your WiFi camera using the app.

Note: Pairing Restart

Press and hold the Reset button on the back for about 5 seconds until a signal tone sounds. When the LED begins to flash red, you can make another pairing attempt.

Note

Detailed operating instructions are available at www.hama.com.

Warranty and Liability

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product, or failure to observe the operating instructions and/or safety notes.

Recycling Information

Note on environmental protection: Electrical and electronic devices, as well as batteries, must not be disposed of with household waste. Consumers are obliged by law to return electrical and electronic devices and batteries at the end of their service lives to public collecting points or points of sale. This symbol on the product, manual, or package indicates this. By recycling and reusing materials, you contribute to protecting our environment.

Declaration of Conformity

Hama GmbH & Co KG declares that the radio equipment type [00176566] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: www.hama.com -> 00176566 -> Downloads.

Technical Data

General Specifications

Specifications in accordance with Regulation (EU) 2019/1782

Electrical Specifications

Safety Instructions

General Safety

• Protect the product from dirt, moisture, and overheating; use only in dry environments.
• This product is intended for private, non-commercial use only.
• Use the product only for its intended purpose.
• Do not use near heaters, heat sources, or in direct sunlight.
• Do not use in areas where electronic devices are prohibited.
• Do not drop the product or expose it to major shocks.
• Do not modify the product; this voids the warranty.
• Keep packaging material away from children (suffocation risk).
• Dispose of packaging material according to local regulations.
• Do not operate outside specified power limits.
• Use only in moderate climatic conditions.
• Do not use in moist environments or expose to splashes.
• Do not mount above locations where people might linger.
• Before mounting, check wall suitability for weight and ensure no electrical, water, gas, or other lines are present in the wall.
• Observe applicable data protection regulations before installation and use.
• Respect personal and property rights of others. Do not record other people with the Dashcam.
• Respect the right to one's own image and spoken word when recording.
• The product is intended for indoor use only.
• Keep this product, like all electrical products, out of the reach of children!

Risk of Electric Shock

• Do not open the device or continue operation if damaged.
• Do not use if the AC adapter, adapter cable, or mains cable is damaged.
• Do not attempt to service or repair the product yourself. Leave service work to qualified experts.

Warning

• Only operate the product from an approved socket located close to and accessible from the product.
• Disconnect the product from the power supply using the On/Off switch (or unplug the power cord if no switch is available).
• If using a multi-socket power strip, ensure the total power consumption of connected devices does not exceed the strip's rating.
• Disconnect the product from mains power if not using it for a prolonged period.