GREENHECK
Inline Cabinet Fan
Model: CSP-A510
Printed Date: 04/24/2025
Standard Construction Features:
- Galvanized steel housing
- Sound absorbing insulation
- Outlet duct collar with integral back draft damper
- Forward curved wheel
- Plug type disconnect
- Adjustable mounting brackets
- Square duct connection
- Field rotatable discharge
Selected Options & Accessories:
- Motor with Thermal Overload
- Motor with CSA Approval
- Motor with 40 Degree C Ambient Temperature
- UL/cUL 507 Listed - Electric Fan
- Isolation Kit, (PN: VI KIT-SP/CSP), Shipped Loose
- Adjustable easy installation mounting bracket
- Polypropylene Wheel Material
Dimensional Data
| Dimensional | Value |
|---|---|
| Quantity | 4 |
| Weight w/o Acc's (lb) | 36 |
| Weight w/ Acc's (lb) | 37 |
Dimensional Diagram: Shows the overall external dimensions of the CSP-A510 Inline Cabinet Fan. Key dimensions include a length of 19.625 inches, a width of 16.875 inches, and a depth of 14.5 inches. The outlet collar measures 14.375 inches by 8 inches, with a height of 13.25 inches. The diagram also illustrates the mounting bracket, which is positioned to allow for attachment with a 1/4-inch threaded rod (field provided) and includes vibration isolators. An arrow indicates the direction of airflow.
Performance Data
| Performance Metric | Value |
|---|---|
| Requested Volume (CFM) | 510 |
| Actual Volume (CFM) | 545 |
| Total External SP (in. wg) | 0 |
| Fan RPM | 1070 |
| * FLA (A) | 3.3 |
| Elevation (ft) | 5,138 |
| Airstream Temp.(F) | 70 |
| Air Density (lb/ft3) | 0.062 |
| Sones | 2.5 |
Performance Graph: This graph displays the fan's performance characteristics. The X-axis represents Volume in Cubic Feet per Minute (CFM) multiplied by 100, ranging from 0 to 6. The Y-axis represents Static Pressure in inches of Water Gauge (in. wg), ranging from 0.0 to 0.6. Two curves are shown: a 'Fan curve' (labeled FRPM and 1070) and a 'System curve'. The operating point at Total External SP is indicated where these curves intersect, showing approximately 545 CFM at 0.3 in. wg. A shaded area indicates 'Do not operate in shaded area'.
Notes: All dimensions shown are in inches. *FLA is approximate and will vary slightly with the motor. Sones - calculated using AMCA 301 at 5 ft. ** Wattage is approximate and may vary between motors.
Certifications: AMCA Certified Ratings, AIR PERFORMANCE
Motor Details
| Motor Detail | Value |
|---|---|
| Motor Mounted | Yes |
| ** Input Watts (W) | 181 |
| Voltage/Cycle/Phase | 115/60/1 |
| Enclosure | ODP |
Isolation Kit (Optional)
Type: Hanging
Standard Construction Features:
Neoprene vibration isolation for hanging installation. Kit includes four isolators and all hardware necessary for mounting one unit, except for the 0.25 in. x 20 in. threaded rod (supplied by others). Fan mounting brackets include prepunched mounting holes for ease of installation.
Kit Components:
| Description | Qty |
|---|---|
| Neoprene Grommets | 4 |
| 1 x 32 Zinc Plated Nuts | 8 |
| Zinc Plated Flat Washers | 8 |
| 3/8 x 3/16 Shaft Sleeves | 4 |
Unit Size Dimensions for Hanging Installation:
| Unit Size | A (inches / mm) | B (inches / mm) |
|---|---|---|
| B50-B200 | 4 1/2 (114) | 15 5/8 (397) |
| A50-A190 | 5 1/2 (140) | 14 5/8 (371) |
| A200-A390 | 6 3/4 (171) | 15 1/2 (394) |
| A410, A510, A710, A780 | 9 1/4 (235) | 19 5/8 (498) |
| A700 | 5 1/2 (140) | 25 1/8 (638) |
| A900 - A1050, A1410 - A1550 | 9 1/4 (235) | 25 3/8 (645) |
| A1750, A2150 | 9 1/4 (235) | 36 3/4 (933) |
| A3600 | 9 1/4 (235) | 48 5/8 (1235) |
All dimensions shown in inches (millimeters).
Isolation Kit Assembly Diagram: Illustrates the components and assembly for hanging the fan unit using the isolation kit. It shows a fan unit suspended by a 1/4-20 threaded rod (supplied by others). The rod passes through a zinc-plated flat washer, a neoprene grommet, another zinc-plated flat washer, and is secured by a 1/4-20 zinc-plated nut. The fan's mounting bracket is shown with prepunched holes for attachment. The diagram also lists the kit components: Neoprene Grommets, Zinc Plated Nuts, Zinc Plated Flat Washers, and Shaft Sleeves.
