Intelligent Vacuum Cleaner D2-001
Operation Instructions
Picture for reference only
1. Safety Precautions
1.1 General Principles of Safety
This product is not to be used by children under the age of 8. People with physical or sensory impairments, developmental disabilities, or lack of experience may use this product under proper supervision and guidance from those who understand the inherent risks.
Warning: Do not touch the electronic components, batteries, or charging stands of the robot. Users are not allowed to maintain internal components. Production maintenance requires authorized personnel. Ensure the charging stand's rated power supply voltage meets the standard plug voltage.
1.2 Safety Instructions
Before operating the robot, read all safety precautions and operation instructions. Pay attention to all warnings on the battery, power adapter, robot, and in the user instructions. Follow all operating instructions. The harm caused by wrong operation and the degree of damage are described as follows.
1.3 Product Safety Issues
Warning
This product is limited to the original battery charging stand and adapter; using others may cause product damage, electric shock, or fire due to high voltage.
Before use, place the charging stand against a wall, ensuring no articles are within 2 meters in front and 1 meter to the left and right.
Do not use the product if the main engine or accessories are damaged. Contact after-sales service. No one except authorized maintenance technicians may dismantle, repair, or modify the product.
Do not touch the power plug or product with wet hands, as this may cause electric shock.
Do not use the product without a protective fence to prevent accidental falls and potential injury.
Do not use the power cord to drag or move the product. Avoid twisting, bending, or placing heavy objects on the power cord.
Keep the product away from fire sources, flammable, explosive, and corrosive materials.
Keep away from direct heat and any corrosive or explosive materials.
Indoor use only. Do not use for spilled liquids.
Before use, ensure extra cording is contained and kept clear of vacuum operation to avoid interference.
Please remove all vulnerable items before use.
Do not lift the vacuum cleaner by holding the front shell. Use both hands to hold the machine body.
It is forbidden to use non-original adapters and charging stands to charge the machine, as this may cause damage.
1.4 About the Safety of Children
- Children are not allowed to use this product alone.
- Children are not allowed to play with the product's packaging bag, as it may cause suffocation.
1.5 About Batteries
- This product is only suitable for the original battery provided by the manufacturer.
- The battery must be removed when the product is discarded.
- If the host battery needs replacement, contact the after-sales service department. Replacing with the wrong model may lead to safety accidents.
- In case of battery leakage, if the liquid contacts skin or clothes, wipe with a dry cloth immediately. Discarded batteries should be sent to a recycling station or designated maintenance point.
2. Product Composition
2.1 Package List
| Serial Number | Describe | Quantity |
|---|---|---|
| 1 | Host (including battery) | 1 |
| 2 | Recharge Stand | 1 |
| 3 | Remote (Not Included battery) | 1 |
| 4 | The Power Adapter | 1 |
| 5 | A Set of Mops for the Whole Machine | 1 |
| 6 | Operation Instructions | 1 |
| 7 | Side Brush | 4 |
| 8 | High Efficiency Filter Screen | 1 |
Warm Reminder: 1. Battery is built-in the machine. 2. Filter is installed on the dust box.
2.1 Main Engine Diagram
Diagram showing the main components of the vacuum cleaner: Indicator Light, Face plate, Fixed Point Cleaning, Infrared Front Bumper, Automatic Recharge, Start & Pause Button, Middle Cover, Anti-Drop Sensor, Charging Electrode Piece, Side Brush, Universal Wheel, Anti-Drop Sensor, Battery Cover, Dustbin Vacuum Sniff, Right Wheel Drive, Dust Screen, Fine Filter, Efficient Filtration of HEPA, Left Wheel Drive.
- 1. WiFi indicator light (connected to high configuration version of mobile app)
- 2. Start & Pause Button (start or pause)
2.2 Host Diagram
Diagram of the host: Middle Cover, Dust Box, DC Power Jack, Dust box cover.
2.3 Diagram of Charging Stand
Diagram of the charging stand: Charging Indicator, Power Adapter, Charging Electrode Piece, Charging Electrode Piece, Power Interface.
2.4 Dust Box Installation
To take out: hold the handle by hand and pull it out. To put in: Put the dust box back and make sure it was flat.
Note: To keep vacuuming most efficient, clean the dust box filter after each use; filter buildup will affect vacuum performance.
2.5 Cleaning and Brushes
Use the cleaning brush to clean debris on the side brushes. If there is more hair on the side brush, use scissors to carefully cut the hair, then clean it.
Installation Steps: Align the brush with the hole position and press down firmly until you hear a "snap" sound, indicating the side brush is installed.
Uninstallation Steps: Grasp the brush at either end and pull it out with slight force.
Warm Tips: Before using the device, please check if the side brushes have been installed; otherwise, it cannot work.
3. Product Use
*Note: Before use, remove the protective bolt and tidy up small objects or obstacles in the room, especially wires and other entanglements that need to be cleaned.
3.1 Application Scope of the Product
Scope of Application
The product is suitable for the following floors:
- Wood
- Tile
Scope of Inapplicability
- Not suitable for use in extremely hot (+60°C) or extremely cold (-5°C) environments.
- This product is only suitable for indoor use.
- Cannot be used in places without a protective fence to avoid personal injury from accidental falls.
- Do not use in humid, flammable, explosive, or corrosive environments.
- Do not allow the product to absorb cigarette butts or unextinguished matches.
- Cannot be used to absorb toner and color powder used in laser printers and copiers, as these substances can cause fire.
- Do not absorb sharp objects, such as glass or nails, to avoid product damage.
- Do not use for carpets thicker than 12mm to avoid machine jamming.
3.2 Machine Working
3.2.1. On /Off
When the machine is in "off" mode, press and hold the "Auto" button for 3 seconds. The buzzer will alarm once, the three LEDs will flash simultaneously, and it will enter standby mode after 3 seconds, with LEDs stopping flashing and remaining on.
3.2.2. Standby Mode
When the machine is in standby mode, there are 6 different operations for the next step:
- Press the [Auto] button: The buzzer will alarm once, and the machine will enter automatic cleaning mode.
- Press the [Fixed Point] button: The buzzer will alarm once, and the machine will enter automatic fixed-point cleaning mode.
- Press the [Recharge] button: The buzzer will alarm once, and the machine will enter automatic recharge mode.
- Press the [Power Off] button for 3 seconds: The buzzer will alarm twice, and the machine will shut down.
- Plug in the charger: The buzzer will alarm once, and the light flashes; the machine will enter direct charging mode.
If the machine is not operated, it will automatically shut down after 5 minutes.
3.2.3. Automatic Cleaning
When the machine is in automatic cleaning mode, the automatic cleaning is on. The machine follows an internal cleaning path, avoiding obstacles and steps.
Press the automatic or fixed-point button on the machine: The buzzer will alarm once, and the machine will enter standby mode.
If the battery power is low, the buzzer alarms 3 times, and the machine will enter automatic recharge mode.
If the charger is inserted, the buzzer will alarm once, and the machine will enter charging mode.
3.2.4. Fixed Point Cleaning Mode
When the machine is in fixed-point cleaning mode, the fixed-point LED light is on. It will recharge after three minutes of cleaning, suitable for small-scale areas.
Press the automatic or fixed-point button on the machine: The buzzer will alarm once, and the machine will enter standby mode.
3.2.5. Automatic Recharge
The machine automatically returns to the charging stand to recharge when power is lower than 20 percent.
When the machine is charging, the LED light of automatic cleaning mode flashes. The light stays on when the machine is fully charged.
To initiate recharge manually: Press the Auto button on the machine, the [A] button on the remote, or use the app.
3.2.6. Troubleshooting
In case of a trouble situation, the machine will stop working. The Auto Cleaning light and Fixed Point Cleaning light will be on simultaneously, and the buzzer will alarm. The machine will turn off if there is no manual operation.
| No. | Fault Mode | Prompt | Solution |
|---|---|---|---|
| 1 | Left LED flashes 1 once, and buzzer alarms once. | Check whether the sensor lens on the left side of the machine is dusty and clean it. | |
| 2 | Front LED flashes, and buzzer alarms once. | Check whether the sensor lens in front of the machine is dusty and clean it. | |
| 3 | Right LED flashes 3 times, and buzzer alarms once. | Check whether the sensor lens on the right side of the machine is dusty and clean it. | |
| 4 | Right Collision LED flashes 4 times, and buzzer alarms once. | Check if the right bumper housing is jamming. | |
| 5 | LED flashes 5 times, and buzzer alarms once. | [Description missing in OCR, likely related to bumper/housing] | |
| 6 | Over Current LED flashes 6 times, and buzzer alarms once. | Check whether the left wheel is wrapped or stuck. | |
| 7 | LED flashes 7 times, and buzzer alarms once. | Check whether the right wheel is wrapped or stuck. | |
| 8 | Abnormal Left wheel LED flashes 8 times, and buzzer alarms once. | Check whether the left wheel is wrapped or stuck. | |
| 9 | Abnormal right wheel LED flashes 9 times, and buzzer alarms once. | Check whether the right wheel is wrapped or stuck. | |
| 10 | Motor LED flashes 10 times, and buzzer alarms once. | Check whether there are foreign objects inside the fan. | |
| 11 | Side Brushes F LED flashes 11 times, and buzzer alarms once. | Check whether the left and right brushes are wrapped. | |
| 12 | The machine LED flashes 13 times, and buzzer alarms once. | Check for foreign objects. |
4. Charging Operation
4.1 Charging Stand Placement
For optimal operation, the base should be:
- On stable footing against a wall.
- The path to the base must be clear of all objects so as not to impede its path.
- Place no furniture or other objects within one meter to both the right and the left of the base.
4.2 Manual Charging
Connect the power adapter directly to the machine and connect the other side to the power supply.
- When charging for the first time, please charge for 12 hours.
- During daily use, store the machine on the charging stand and ensure it is connected to the power supply.
- If not using the machine for a long time, fully charge it, turn it off, and store it in a ventilated and dry place.
5. Product Maintenance
5.1 Cleaning Side Brushes
Clean the side brush when it becomes dirty. If it is damaged, it can be replaced.
Use the cleaning brush to clean debris on the side brushes. If hair is heavily entangled, use scissors to carefully cut the hair before cleaning.
Installation: Align the brush with the hole position and press down firmly until you hear a "snap" sound.
Uninstallation: Grasp the brush at either end and pull it out with slight force.
Clean the universal wheel to reduce hair entanglement.
Warm Tips: Before using the device, please check if the side brushes have been installed; otherwise, it cannot work.
5.2 Cleaning of Dust Box and Filter
- Take out the dust box.
- Open the dust box and clean up the debris.
- Remove the filter, wash the HEPA with water, and remove dust with slight taps.
- Wash the dust box under running water and dry the dust box and filter parts.
5.3 Cleaning of Sensor and Charging Electrode
Gently wipe the sensor and electrode pieces with a soft cloth.
Diagram showing sensors and charging docking electrodes on the machine and charging stand.
*Reminder:
6. Specifications
| Parameter | Value |
|---|---|
| Working Voltage | 7.4V |
| Rated Power | 25W |
| Rechargeable Battery | Lithium Battery |
| Battery Capacity | 4400mAh |
| Charging Time | About 4~5 Hours |
| Working Hours | ≥90 mins |
| Operating Temperature Range | -10℃~45℃ |
| Operating Humidity Range | ≤90%RH |
| Capacity of Dust Collection Box | 600ML |
| Dimensions (L x W x H) | 320*320*78mm |
7. Mop Assembly and Use Instructions
Remove the protective sticker to reveal the adhesive side of the Velcro.
Attach the mop to the designated position on the back of the machine, ensuring it is free from dust and water stains.
The mop can be reused after washing.
A. Note: Always wring out the mop slightly after wetting it with water, then stick it on the back of the machine to avoid excessive water stains.
8. Remote Instruction
Diagram showing remote control buttons: LED Indicator, Standby Button, Automatic Cleaning Button, Fixed Point Cleaning Button, Auto Charge Button, Start / Pause Button, Infrared Signal Emission Lamp, Battery Cover, Right Button, Forward Button, Backward Button, Edge wall cleaning Button, AAA battery.
Troubleshooting (Remote)
| Number | Fault Phenomenon | Cause of Failure | Solution |
|---|---|---|---|
| 1 | The indicator does not turn on red. | No battery or reverse polarity. | Reinstall or replace the battery. |
| 2 | Low remote control sensitivity. | Low battery. Something is blocking the remote control signal. | Replace the battery. Confirm to use in an open space. |
| 3 | Button Failure. | Foreign matters or water in the button. Low battery. | Remove foreign things. Replace the battery. Contact the manufacturer. |
*Warm Reminder:
- If the unit will not be used for an extended period, remove and store the battery in a cool location with low humidity.
- In case of battery leakage, remove batteries, wipe the unit's battery compartment, and wash your hands.
- Do not allow water to enter the remote control. Do not use it in a humid environment for a long time.
9. WiFi Connection
Follow these steps to connect the sweeping robot to WiFi:
- Register an account and log in.
- Enter the interface.
- Select the 2.4GHz WiFi Network and enter the password, then click the "Next" icon.
- WiFi connection is in progress. When the mobile phone displays "added successfully", click "Done" to enter the operation interface.
Schedule Function:
The Schedule function is similar to an alarm clock on a phone. After setting the cleaning time, the machine will automatically enter the automatic cleaning mode at the set time, provided the robot is in standby or charging on the recharging stand.
Steps to set a schedule:
- Click "Settings" to enter the timing interface (as shown in Figure 1.2).
- Click the desired time to set, e.g., 15:47. This can be repeated one or more times. Select the working mode for the appointment and save it (as shown in Figure 3).
- Click the saving button in the upper right corner (as shown in Figure 3).
- To cancel a scheduled time, click the switch on the right. If it disappears, the appointment for the day is canceled.
- When the machine reaches the set time, it will run automatically.
Note on WiFi connection: Long press the "Auto" button; the LED will flash and then stay on, indicating the robot has entered standby state. Two connection methods are optional; "Auto scan" is used as an example.
The document mentions German text for some UI elements: "registrieren" (register), "Telefonnummer/Email" (phone number/email), "Verifizierungscode abrufen" (get verification code).
Environmental Information
This section details the presence of hazardous substances in compliance with RoHS directives.
| Component Category | Pb (Lead) | Hg (Mercury) | Cd (Cadmium) | CrVI (Hexavalent Chromium) | PBB (Polybrominated Biphenyls) | PBDE (Polybrominated Diphenyl Ether) |
|---|---|---|---|---|---|---|
| Plastic parts | ○ | ○ | ○ | ○ | ○ | ○ |
| Hardware (4) | X | ○ | ○ | ○ | ○ | ○ |
| Host Circuit Modular | X | ○ | ○ | ○ | ○ | ○ |
| Battery | ○ | ○ | ○ | ○ | ○ | ○ |
| Plug power line (metal) | X | ○ | ○ | ○ | ○ | ○ |
○: Indicates the content of the hazardous substance is below the limit specified in GB/T 26572.
X: Indicates the content of the hazardous substance exceeds the limit requirements, and there is no mature alternative in the industry.
