FEZIBO Standing Desk

Cautions

Please read this manual carefully. If this desk changes hands, please provide this manual to the new owner.

Make sure the desktop is not touching any obstacles or walls and that no obstacles are in the desk's path. Ensure all cords are an appropriate length to accommodate the full range of height adjustment.

Keep children away from desk components. There is a risk of injury and electric shock. Do not sit or stand on the desk frame. Do not crawl or lie under the desk frame.

Do not open or modify any of the components, including the Lifting Columns, Control Box, or Handset. Doing so risks electric shock and voids any warranty claims.

Placing objects taller than 20" underneath the desk will obstruct the desk's movement and may result in physical damage.

Voltage Converters

Using a voltage converter could cause damage to the desk and is considered improper use. The resulting damage is not covered by the warranty.

Verify the voltage of the Control Box as labeled to avoid damage. Alternative voltage Control Boxes are available from FEZIBO. This FEZIBO height adjustable desk has electric motors and is designed for use in dry work environments only.

Use & Liability

This FEZIBO desk is adjustable so it can be positioned at an optimal ergonomic height. Any extracurricular use is at the user's own risk. Under no circumstances does the manufacturer accept warranty claims or liability claims for damage caused by improper use or handling of the desk frame.

Before Starting

On a padded or carpeted area, take all of the items out of your FEZIBO frame box and confirm that nothing is missing. Reference the included parts listings on page 3.

Specifications

Electric Control Part:

• Input Voltage: 100-240Vac 50/60Hz
• Duty Cycle: 10%MAX 2min on 18min off

Desk Frame Part:

• Dynamic Load: 60KG / 132Lbs
• Maximum Static Load: 80KG / 176Lbs

Safety Warning

1. Indoor use only.
2. The product must be connected to the correct power supply.
3. For any accessories connected to the control box, the plug type and electrical characteristics must conform to its specifications.
4. If the transformer's external cable is damaged and needs to be replaced, a new accessory will be provided by the manufacturer or its service agent.

Tools Needed

• Electric Drill (Not Included)
• Phillips Screw Driver (Not Included)

Parts List

• A: Lifting Column
• B: Lifting Column with Gearbox
• C: Foot (x2)
• D: Crossbar
• E: Sync Rod
• F: Side Bracket (x2)
• G: Power Cable
• H: Handset
• I: Power Adapter
• J: Medium Wood Screw (Quantities vary by desktop size: x22 for 48", x26 for 55", x28 for 63")
• K: Medium Machine Screw M8 x 8
• L: Small Machine Screw M6 x 10
• M: Small Wood Screw (x2)
• N: Connection Strap (Quantities vary by desktop size: x3 for 48"/55", x4 for 63")
• O: Cable Clip (x10)
• P: Hook (x2)
• Q: Tabletop (x2)
• R: Bolt (Quantities vary by desktop size: x5 for 48", x6 for 55"/63")

Pro Tip: Wood Screws typically have a pointy end. Machine Screws typically have a flat end.

Tools Provided (Screw Sizes): M5, M4, M2.5

Assembly Instructions

Step 1

Attach the Feet (C) to the Lifting Columns (A). Use Medium Machine Screws (K) and M5 screws as indicated in the diagram.

Step 2

Connect the Crossbar (D) to the Lifting Columns (A/B). Secure using Small Machine Screws (L) and M4 screws.

Step 3

Insert the Sync Rod (E) into the mechanism. Tighten using M2.5 screws. Ensure the rod is properly aligned and secured.

Step 4

Attach the Side Brackets (F) to the Lifting Columns. Use Small Machine Screws (L) and M4 screws for attachment.

Step 5

Secure the Connection Straps (N) to the underside of the Tabletop (Q). Use Medium Wood Screws (J) and Bolts (R). The number of screws/bolts depends on the desktop size (48", 55", or 63").

Step 6

Attach the Tabletop (Q) to the assembled frame. Use Medium Wood Screws (J) x10. Ensure the Sync Rod (E) is facing the correct direction as shown.

Step 7

Mount the Handset (H) to the underside of the tabletop. Use Small Wood Screws (M) x2.

Step 8

Connect the Power Cable (G) and Power Adapter (I) to the system. Use Hooks (P) and Medium Wood Screws (J) x2 to manage the cables.

Directions for Use

Handset Operation

The handset features Up/Down keys, Memory keys (M1-M4), a Set key (M4), and a Display Screen.

• Up & Down Keys: Press and hold to adjust desk height to your desired position.
• Display Screen: Shows the current desk height.
• Memory Keys (M1-M4): Save preferred heights. To save, press and hold a memory key (M1-M4) for 5 seconds until a [beep sound] is heard. To recall a saved height, lightly press the corresponding memory key.
• Set Key (M4): Used for setting internal parameters.

The screen and keys may lock after 30 seconds of inactivity. Press the Up or Down key to unlock.

Initialization

This process resets the desk to its lowest point.

1. Standard Initialization: When "RST" is displayed, press the Down [⬇️] button until the desk reaches its lowest point. After a [beep sound] and rebound, initialization is complete. Do not release the button during this process.
2. Forced Initialization: Press the Down [⬇️] button until the desk reaches its lowest point. Release the button, then press and hold it again for approximately 5 seconds until a [beep sound] and rebound occur.
3. Restore Factory Settings: If a new controller is installed or settings need resetting, press the Up [⬆️] and Down [⬇️] buttons simultaneously. After about 5 seconds, a [beep sound] will occur, followed by a second [beep sound] after 10 seconds. When "RST" is displayed, perform standard initialization (item 1).

Safety Function

If the desk encounters resistance while moving up or down, it will automatically rebound to prevent damage or injury.

Handset Error Codes & Solutions

Advanced Function Settings

Access advanced settings by pressing the Set key (M4).

• Limited Height Setting: Press Up [⬆️] and Down [⬇️] keys for 5 seconds until a [beep sound]. Set minimum height < 96, maximum height > 97. To cancel, press Up [⬆️] and Down [⬇️] again for 5 seconds until a buzzer sound.
• Lock & Unlock: Press Up [⬆️] and Set [S] keys for 5 seconds; screen displays "LOC" (system locked). Press Down [⬇️] and Set [S] keys for 5 seconds; screen displays "LOC" with numbers (system unlocked).

Parameter Settings (Use M4 key to navigate):

• S-1 Metric/Inch Exchange: Click "M4" Key. Options: 0 (Metric), 1 (Inch).
• S-2 Reservation Function: Click "M4" Key. Options: 0, 1, 8.
• S-3 Up Anti-collision Sensitivity: Click "M4" Key. Options: 0 (shut down), 1 (most insensitive), 8 (most sensitive).
• S-4 Down Anti-collision Sensitivity: Click "M4" Key. Options: 0 (shut down), 1 (most insensitive), 8 (most sensitive).
• S-5 Basement Height: Click "M4" Key. Use Up [⬆️] or Down [⬇️] to adjust basement height.
• S-6 Memory Key Operation: Click "M4" Key. Options: 0 (Long pressing desk running, hands off desk stop running), 1 (Click desk running, second click to stop running).
• S-7 Overheat Protection: Click "M4" Key. Options: 0 (shut down), 1 (Continuous operation for two minutes, error HOT).
• S-8 Reservation Function: Click "M4" Key. Options: 0 through 8.

Press M4 key until the second [beep sound] (approx. 10s) to save settings. Use Up [⬆️] or Down [⬇️] keys to choose values. Press M4 to return to the numerical display interface. Press M3 to return to the Menu "S-*" interface.

Why Choose FEZIBO?

Many ergonomic office solutions come at high cost. FEZIBO's mission is to use innovation, creativity, and efficiency to produce a more affordable solution that doesn't sacrifice quality and is easily accessible to millions of home and office workers globally.

Warranty Service

To provide the best service, register your FEZIBO product to confirm your warranty. This allows access to technical support, new product alerts, promotions, and warranty service from FEZIBO.

Contact: Send your name and order ID to service@fezibo.com

For more FEZIBO products, check our website: www.fezibo.com