XTM Awning Hub
Instruction Manual
XTM 4x4 ACCESSORIES
Parts List
| Description | QTY |
|---|---|
| Tent | 1 |
| Awning Poles | 2 |
| Steel Pegs | 20 |
| Carry Bag | 1 |
| Guy Ropes | 2 |
| Straps | 2 |
Component Visual Descriptions:
- Awning Pole: A long, slender pole used for supporting the awning structure.
- Steel Peg: A metal stake with a hook, used for securing the tent and guy ropes to the ground.
- Strap: A fastening strap, likely with buckles, used for securing components.
- Guy Rope: A rope, often with a tensioner, used to stabilize the awning structure by anchoring it away from the tent.
- Tent: The main fabric shelter, shown rolled up in its carry bag.
- Carry Bag: A dark fabric bag designed to store and transport the tent and its components.
Set Up Instructions
Step 1: Ensure the ground is free from sharp objects. Unfasten the tent and spread it out on the ground. Then peg down the floor.
Visual: A tent laid out flat on the ground, with a person pegging down the floor.
Step 2: Slide the roof pole out from both sides until you hear an audible 'click'.
Visual: The tent structure with poles being extended. A close-up shows a pole locking mechanism engaging, indicated by an audible 'click' and a [checkmark].
Step 3: Stretch all four leg poles until you hear an audible 'click'. The poles are now fully extended.
Visual: The tent structure with all four leg poles extended and locked. A close-up shows a pole locking mechanism engaging, indicated by an audible 'click' and a [checkmark].
Additional Instructions for Fitting to an XTM Awning
Step 4: Fasten all floor adjustable webbings and peg down.
Visual: The tent structure with floor webbings being tightened and pegs being hammered into the ground.
Step 5: Fix the roof fly by using guy ropes and peg out away from the tent.
Visual: The tent with the roof fly attached. Guy ropes are shown extended from the fly and anchored to the ground with pegs.
Step 6: To assemble the awning use the steel poles and guy ropes provided. Peg down the guy ropes to secure the poles.
Visual: The fully assembled awning attached to the tent, supported by poles and secured with guy ropes.
Fitting to an XTM Awning
Step 1: The awning with a channel slot can be attached to the awning hub. There is a keder connector above the front door.
Visual: A vehicle with an awning attached. A close-up highlights the keder connector located above the front door of the awning.
Step 2: First, detach the keder connector from the awning hub, and then insert the keder into the channel slot.
Visual: A close-up view shows the keder connector being removed from the awning hub and then slid into the awning's channel slot.
Step 3: Then, zip the zipper of the keder connector and awning hub together. Attach all the adjustable webbing straps to the awning poles.
Visual: A close-up shows the zipper connecting the awning hub and keder connector being fastened. Adjustable webbing straps are shown being attached to the awning poles.
Product Information
PLU: 616753 | CODE: CL-AHUB
Manufactured and Packaged for SRG PTY LTD
ABN 23 113 230 050
6 Coulthards Avenue Strathpine QLD 4500 Australia
MADE IN CHINA
