VÅRDTRÄD Self-Watering Plant Pot
IKEA
Step 1: Prepare the Pot Base
Insert the slotted component (item ID: 10120563) into the bottom of the outer pot. Ensure the component is correctly aligned and seated.
[Diagram: Shows a person consulting instructions (with a question mark symbol) and then assembling the pot base by inserting a slotted component.]
Step 2: Assemble and Attach Water Reservoir
Place the circular reservoir base onto the assembled pot base. Rotate the reservoir base until it clicks into place, securing it to the pot.
[Diagram: Shows the reservoir base being placed on the pot and rotated. A "Click!" label indicates successful attachment.]
Step 3: Add Soil and Plant Your Plant
Place the assembled pot. Add soil into the pot, filling it to the appropriate level. Then, carefully place your plant into the soil.
Important: ❌ Do not place the plant directly into the water reservoir without soil.
[Diagram: Shows adding soil to the pot and then placing the plant. A large red cross (❌) symbol is shown over an image of a plant placed directly into the water reservoir, indicating this is incorrect.]
Step i: Watering and Water Level
Water your plant as needed. The self-watering system will draw water from the reservoir. Check the water level regularly.
Water Level Indicator: The pot has a MAX line to indicate the maximum fill level for the water reservoir. Do not fill above this line.
Caution: Avoid overfilling the water reservoir. Ensure proper watering to prevent root rot.
[Diagram: Shows watering the plant. Close-up views highlight the "MAX" water level line. Another large red cross (❌) symbol is shown over an image of the reservoir being overfilled, indicating this is incorrect.]
