DS18 12PRO2500MB-8
12" Professional Mid-Bass Loudspeaker with 4" ISV Voice Coil
Owner's Manual
Specifications
Nominal Diameter | 12" / 300 mm |
Nominal Impedance | 8 OHMS |
RMS Power Handling | 1250 Watts |
MAX Power Handling | 2500 Watts |
Sensitivity (1w/1m) | 99 dB |
Frequency Response | 40Hz-5KHz |
Recommended Hi Pass Crossover | 80 Hz |
Sold as Pair or Single | Single / Unidad |
Features
- Interleaved Sandwich Voice Coil (ISV): Yes
- Improved Heat Dissipation: Yes
- Cone Shape: Curvilinear
- Speaker Terminals: Push with Spring Loaded
Motor Specifications
Voice Coil Diameter | 4" / 101.6 mm |
VC Former Material | Fiberglass |
Winding Material | CCAW / CCA |
Cone Material | Non-Pressed Paper |
Dust Cap Material | Paper |
Surround Material | Cloth |
Basket Material | Aluminum |
Basket Color/Finish | Black |
Magnet Material | Ferrite |
Magnet Weight | 126 Oz |
Displacement Volume | 1.9L / 0.067ft³ |
Thiele & Small Parameters
Equivalent Volume (Vas) | 32.9L / 1.16ft³ |
Excursion (one way) (Xmax) | 2 mm |
Free Air Resonance (Fs) | 68 Hz |
Mechanical Factor (Qms) | 7.61 |
Electrical Factor (Qes) | 0.45 |
Total Factor (Qts) | 0.42 |
Mechanical Mass (Mms) | 68.86 g |
Mechanical Compliance (Cms) | 0.08 mm/N |
BL Factor (Bl) | 19.82 |
Voice Coil Inductance (Le) | 0.41 mH |
Cone Area (Sd) | 539.13 cm² |
DC Resistance (Re) | 5.9 ohm |
Mechanical Mass w/o air (Mmd) | 57.63 g |
Measurements
The loudspeaker has the following physical dimensions:
- Overall Diameter: 12.4" / 316 mm
- Overall Depth: 5.78" / 147 mm
- Front Mount Baffle Cutout: 11.22" / 285 mm
- Mounting Depth: 5.4" / 137 mm
- Motor Diameter: 8.6" / 220 mm
- Mounting Hole Diameter: 0.25" / 6.5 mm
The graph titled "SPL vs Freq" illustrates the Sound Pressure Level (SPL) in decibels (dB) across a frequency range from 20 Hz to 20 kHz. The response shows variations, with a peak sensitivity around 105 dB.
The product is described as "Designed & Engineered in USA".
Warranty and Warnings
For detailed warranty information, please visit the official DS18 website: DS18.com.
DS18 reserves the right to modify product designs and specifications without prior notice. Optional equipment may be depicted in images.