COMMERCIAL-STYLE DUAL FUEL RANGE
QUICK REFERENCE GUIDE
Key Components and Indicators
The following components and their indicator lights are detailed:
- A WiFi Antenna Module
- B Oven Light Button
- C Mode and Temperature Knob and Indicator Light
- D Oven Start Button and Indicator Light
- E WIFI Indicator Light
- F Remote Enabled Indicator Light
- G SAID Label
Refer to the Use & Care Guide for detailed diagrams of 30" and 48" models.
Light Indicators and Behaviors
| FUNCTION | USE & LIGHT BEHAVIOR |
|---|---|
| Oven Start Button |
Solid White Light: The Start Button illuminates solid white when the most recent command was sent from the app and the appliance is being controlled remotely. The light turns off as soon as an action is taken on the appliance.
Pulsing White Light: The Start Button flashes white to prompt the user to press start after the Mode and Temperature have been selected. If no action is taken after 2 minutes, a tone sounds and the unit returns to idle. To exit idle, re-select a Mode and Temperature before pressing the Start Button. Quick-Blinking White Light: If an invalid knob combination is chosen and the Start Button is pressed, the Indicator Light quickly blinks and a tone sounds to indicate an invalid combination. Refer to the Mode and Temperature Compatibility Table for valid combinations. |
| Mode and Temperature Indicator Light |
Solid White Light: When a Mode or Temperature is selected and the combination is valid, the Mode and Temperature Indicator Light illuminates white.
Solid Red Light: After a valid Mode and Temperature are selected and the Start Button is pressed, the Indicator Light turns red until preheat is completed. Solid White Light: The light turns solid white and a tone sounds when preheat is complete. If no preheat is required, the preheat completes immediately and the light turns solid white. Quick-Blinking White Light: If an invalid knob combination is selected, the light blinks and a tone sounds, prompting the user to select a valid combination. The Indicator Light continues to blink and a tone sounds every 30 seconds until the error is fixed or the unit times out after 2 minutes of inactivity and returns to idle. Pulsing Amber Light: The Indicator Light pulses amber if the oven is undergoing a 100+ degree decrease in temperature (e.g., changing from Bake 450°F to Bake 350°F) or if the oven is too hot to properly proof and needs to cool down. |
| WIFI Indicator Light | Solid White Light: The WIFI Indicator Light illuminates white when the unit is WIFI enabled, allowing the user to monitor the unit. All lights turn off in idle even when the unit is connected to WIFI. |
| Remote Enabled Indicator Light | Solid White Light: The Remote Indicator Light illuminates white when the unit is remote enabled and the user can send instructions to the unit. All lights turn off in idle even when the unit is remote enabled. |
| Griddle Power Indicator Light* | Solid Blue Light: The Griddle Power Indicator Light illuminates blue when the griddle is powered on. |
| Griddle Preheat Light* |
Blinking Blue Light: The Griddle Preheat Light flashes blue while the griddle is preheating.
Solid Blue Light: Once the preheat temperature has been reached, the Indicator Light turns solid blue. |
*On 48" models only
WIFI CONNECTIVITY
Models are equipped with a WIFI Antenna Module for remote operation. The control can monitor and perform remote operations after the remote enabling function sequence is initiated at the appliance.
To connect your appliance:
- Download the KitchenAid™ App from the Google Play® or Apple App Store and create an account.
- Locate the SAID Label using the diagram on the front of this Guide.
- Set both the Mode and Temperature Knobs to the WIFI mode.
- Once the knobs are in position, press the pulsing Start Button.
- When the WIFI Indicator Light to the left of the knob starts blinking white, follow the steps in the app.
- When the connection is complete, the WIFI Indicator Light will turn solid white.
- To enable remote operations, turn on “Remote Control” in the app. The Remote Indicator Light will turn solid white to signify remote control commands can be sent to the range.
For more information on WIFI Connectivity, visit www.kitchenaid.com/connect.
*Appliance must be set to Remote Enable. Features subject to change. Compatible connected appliance required. Details and privacy info at www.kitchenaid.com/connect.
MODE AND TEMPERATURE COMPATIBILITY TABLE
| MODE KNOB | TEMPERATURE KNOB |
|---|---|
| Bake | Proof Warm Temperatures (225-500°F) |
| Broil | Broil High Broil Low |
| Convect Bake | Temperatures (225-500°F) |
| Convect Roast | Temperatures (225-500°F) |
| Convect Broil | Broil High Broil Low |
| Clean | Clean |
| WIFI | WIFI* |
*See WIFI Connectivity Section
NOTE: When the unit is on, Mode can be changed between Bake, Convect Bake, Convect Roast, and Broil/Convect Broil. Press the Start Button to confirm Mode change.
CHANGING MODE/TEMPERATURE DURING A CYCLE
| ACTION | EXAMPLE | |
|---|---|---|
| Invalid Mode/Temperature Combination Made During a Cycle* | If the Temperature is changed during a cycle to a selection that is invalid and the unit was in a previous cycle, the unit will remain in the previous cycle until corrected. The Mode and Temperature Indicator Light will blink to show an invalid selection has been made and will continue to blink until corrected.
*Refer to the Mode and Temperature Compatibility Table. |
Mode is in Bake, Temperature is at 350°F (177°C), Start Button is pressed and cycle is running. Then Mode is moved to Broil High. Unit will continue to Bake at 350°F (177°C). |
| Changing Mode Selection During a Cycle | If the Mode or Temperature Knob is changed during a cycle to a selection that is valid, the Start Button will blink to indicate prompt for action. Press the Start Button to begin new setting selection. | If the Mode is moved from Bake to Convect Bake, the Start Button will blink as a prompt for action. |
W11114332B
©2020 KitchenAid. All rights reserved. All other trademarks are owned by their respective companies. D190462KCA
