Outdoor Storage Shed Assembly Instructions
Step-by-step guide for assembling an outdoor storage shed, including parts list and hardware specifications.
Parts List
| Part # | Description | Quantity |
|---|---|---|
| 1 | Side Panel (with window openings) | 1PC |
| 2 | Side Panel | 1PC |
| 3 | Back Panel | 1PC |
| 4 | Front Panel | 1PC |
| 5 | Roof Frame | 1PC |
| 6 | Shelf | 1PC |
| 7 | Door/Panel Section | 1PC |
| 8 | Door/Panel Section | 1PC |
| 9 | Door/Panel Edge Piece | 1PC |
| 10 | Roof Panel | 1PC |
| 11 | Roof Panel | 2PCS |
| 12 | Roof Panel | 2PCS |
| 13 | Base Support | 2PCS |
| 14 | Ridge Cap/Top Support | 1PC |
Hardware
| Hardware ID | Description | Quantity |
|---|---|---|
| A | Ø6*45mm Screw | 9PCS |
| B | 3.5*30mm Screw | 36PCS |
| C | 3*25mm Screw | 12PCS |
| D | 3*18mm Screw | 6PCS |
| E | Hook | 1PC |
Assembly Steps
Step 1: Assemble Main Frame
Attach side panels (Parts 1 and 2) to the back panel (Part 3) and front panel (Part 4) using screws B (3.5x30mm). The roof frame (Part 5) is also shown as part of this initial assembly.
Step 2: Install Shelves
Attach shelves (Part 6) to the interior of the side panels (Parts 1 and 2) using screws A (Ø6x45mm).
Step 3: Attach Roof Panels and Hook
Secure roof panels (Part 10) to the roof frame using screws D (3x18mm). Attach the hook (Hardware E) to an interior panel using screws D (3x18mm).
Step 4: Attach Door/Side Panels
Connect door or side panels (Parts 7 and 8) to the main structure. Use screws C (3x25mm) and pins/dowels (Part 15) for alignment and fastening. Part 9 (edge piece) is also shown for these panels.
Step 5: Secure Base and Roof
Attach base supports (Part 13) to the bottom of the assembled structure using screws B (3.5x30mm). Attach roof panels (Part 11) using screws B (3.5x30mm). This step is indicated to be repeated four times (x4).
Step 6: Complete Roof Assembly
Attach the remaining roof panels (Part 12) and the top ridge cap/support (Part 14) to the roof structure. Use screws C (3x25mm) and screws B (3.5x30mm).
