Skoda Trinity Brushed Alloy Wheel
Anthracite Grey Design | 7J x 18" ET 45
Product Description
This document provides fitting instructions for the Skoda "Trinity" brushed alloy wheel, presented in an anthracite grey design with specifications of 7J x 18" ET 45.
Vehicle Compatibility
This wheel is specified for the Skoda KAROQ (NU) model.
Key Information & Installation
Order Number: 57A 071 498A HA7
Construction Number: 57A 601 025P HA7
Ordering Number Format: ŠKODA Original Accessories Order Number = Wheel Serial Number + Lid Serial Number (e.g., 57A 071 498A HA7 = 57A 601 025P HA7 + 5E0 601 151 FOD)
Wheel Bolt Installation Guidelines
Important:
- Wheel bolts must be clean and move smoothly in the thread.
- Never lubricate wheel bolts with grease or oil.
Tightening Torque
Caution: Incorrect tightening can lead to dangerous situations.
- Too low tightening torque: May cause the wheel to loosen during driving, posing an accident risk.
- Too high tightening torque: Can damage the bolts and threads.
The specified tightening torque for wheel bolts on both steel and light metal discs is 140 Nm.
Further Details and Compatibility
For more detailed information, please refer to the Operating Instructions - Self-help - Wheel changing.
The combination of tires and disks allowed for your vehicle is specified in the vehicle's Technical Certificate.
Manufacturer Information
Manufacturer: Škoda Auto a.s
Address: tř. Václava Klementa 869 Mladá Boleslav II, 293 01 Mladá Boleslav, Czech Republic
Contact: infoline@skoda-auto.cz
Website: www.skoda-auto.com, www.skoda-auto.cz
This product conforms to the type approved by the Ministry of Transport of the Czech Republic under approval number ATEST 8SD č.1426.
Information on technical data, design, equipment, materials, guarantees, and outside appearance refers to the period when the mounting instructions were sent to print. The manufacturer reserves the right to changes (including the change in technical parameters with reference to the individual model measures).