Grandstream GRP2616 Carrier-Grade HD IP Phone
Quick Installation Guide
Grandstream Networks, Inc.
126 Brookline Ave, 3rd Floor
Boston, MA 02215 USA
Voice: (617) 566-9300
Fax: (617) 249-1987
[EU Member States: AT BE CY CZ DK EE FI FR DE EL HU IE IT LV LT LU MT NL PL PT SK SI ES SE UK BG RO HR]
In all EU member states, operation of 5150 - 5350 MHz is restricted to indoor use only.
[CE Mark] [WEEE Symbol]
For Warranty and RMA information, please visit www.grandstream.com
Product Image
A Grandstream GRP2616 IP Phone is depicted, showing its main case, handset, stand, and various ports.
Introduction
The GRP2616 is a next-generation enterprise IP Phone featuring 6 dual-color line keys, a 4.3" TFT color LCD, 5 programmable soft keys, and an additional 2.4" screen for multi-purpose keys. It includes a USB port, Gigabit network ports, integrated PoE, Wi-Fi, and Bluetooth support, along with 3-way conferencing and EHS support.
Precautions
WARNING: Do not power cycle the GRP2616 during system boot up or firmware upgrade to avoid corrupting firmware images.
WARNING: Use only the included power adapter. Using an alternative adapter may damage the unit.
Package Contents
- 1x Phone Main Case
- 1x Handset
- 1x Phone Stand
- 1x 12V Power adapter
- 1x Ethernet Cable
- 1x Phone Cord
- 1x Quick Installation Guide
- 1x GPL license
Phone Setup
Installing the phone (Wall Mount)
Attach wall mount spacers to the back of the phone. Mount the phone to the wall using the wall mount hole. Adjust the handset cradle tab to secure the handset.
Installing the phone (Phone Stand)
Attach the phone stand to the bottom of the phone.
Connecting the Phone
- Connect the handset to the main phone case with the phone cord.
- Connect the 12V DC output plug to the phone's power jack and plug the adapter into an electrical outlet. (Skip if using PoE switch).
- Network Connection:
- Using Ethernet: Connect the LAN port to a hub, switch, or router using the Ethernet cable.
- Using WiFi: Navigate to "System→WiFi settings", enable WiFi, select "Scan", choose your network, and enter the password.
- Wait for the date/time display to show up after provisioning or firmware upgrade.
- Configure the phone using the embedded web server or keypad menu (Static IP or DHCP).
Phone Description
The phone features:
- Line keys
- Soft keys
- MENU/OK key
- Conference button
- Transfer button
- Headset button
- Mute button
- Standard keypad
- Message Waiting Indicator
- Navigation keys
- Volume control
- Send button
- Speaker button
- Multi-Purpose Key
- Right Key
- Left Key
Phone Configuration
Using a Web Browser:
- Ensure the phone is powered and connected to the Internet.
- Press and hold the "UP" button for 3 seconds to view the IP address.
- Enter the IP address in your PC browser.
- Log in using the admin username and password (default: username "admin", password on the unit's sticker).
Using the Keypad:
- Ensure the phone is idle.
- Press the MENU key to access the configuration menu.
- Navigate to MENU → Phone → SIP → Account to configure SIP Proxy, Outbound Proxy, SIP User ID, SIP Auth ID, and SIP Password.
- Follow menu options to configure basic features like static IP. Refer to the GRP2600 series User Manual for details.
- Contact your ITSP for additional settings.
For more information, visit www.grandstream.com/our-products.
Regulatory Information
Common Part
This equipment complies with radiation exposure limits for an uncontrolled environment. It must not be co-located or operated with any other antenna or transmitter and should be installed with a minimum distance of 20cm from the radiator and your body.
U.S. FCC Part 68 Regulatory Information
This equipment complies with Part 68 of the FCC rules. The ACTA registration number and ringer equivalence number (REN) are on the equipment label. The REN determines the quantity of devices that can be connected to a telephone line. The sum of RENs should not exceed five (5.0) in most areas. Contact the telephone company for the maximum REN for your calling area.
This equipment cannot be used on telephone company-provided coin service. Connection to Party Line Service is subject to State Tariffs.
The telephone company may notify you in advance if temporary service discontinuance is required due to network issues. You have the right to file a complaint with the FCC if necessary.
The telephone company may make changes that could affect equipment operation, and will provide advance notice for necessary modifications.
If the equipment causes harm to the telephone network, the telephone company may request its removal until the problem is resolved.
This equipment uses USOC jacks: RJ45C.
It is recommended to install an AC surge arrester to protect against local lightning strikes and electrical surges.
The earpiece has HAC function and is easy to scratch; handle with care.
For issues, contact Grandstream Networks, Inc. at 126 Brookline Ave, 3rd Floor Boston, MA 02215, USA. Tel: 1-617-5669300, Fax: 1-617-2491987.
U.S. FCC Part 15 Regulatory Information
This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
If this equipment causes harmful interference to radio or television reception, try to correct it by:
- Reorienting or relocating the receiving antenna.
- Increasing the separation between the equipment and receiver.
- Connecting the equipment to an outlet on a different circuit from the receiver.
- Consulting the dealer or an experienced radio/TV technician.
Canada Regulatory Information
Radio equipment
Operation of 5150-5250 MHz is restricted to indoor use only.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation.
L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : 1) L'appareil ne doit pas produire de brouillage; 2) L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. CAN ICES-3 (B)/NMB-3(B)
Terminal equipment
This product meets the applicable Innovation, Science and Economic Development Canada technical specifications. The Ringer Equivalence Number (REN) indicates the maximum number of devices allowed to be connected to a telephone interface. The sum of the RENs of all devices must not exceed five.
Ce produit répond à la innovation, des sciences et de Développement économique Canada spécifications techniques applicables. Le nombre équivalent de sonneries (REN) indique le nombre maximal de terminaux qui peuvent être raccordés à une interface téléphonique. La terminaison d'une interface peut consister en une combinaison de dispositifs, à la seule condition que la somme des REN de tous les dispositifs ne dépasse pas cinq.
EU Regulatory Information
Support Frequency Bands and Power:
- WLAN/BT 2.4 GHz < 20 dBm;
- WLAN 5.2 GHz < 23 dBm;
- WLAN 5.3/5.6 GHz < 20 dBm;
The simplified EU declaration of conformity referred to in Article 10(9) is provided as follows:
Grandstream Networks, Inc. declares that the radio equipment type GRP2616 is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at: www.grandstream.com
