About This Guide
This document serves as a comprehensive installation guide for the iDatalink Maestro RR system in specific Hyundai Accent models. It includes wiring diagrams and vehicle wire reference charts to assist with the installation process.
Before beginning, ensure your iDatalink Maestro module is programmed with the correct firmware for your vehicle. For detailed instructions on programming and initial setup, please refer to the 'Getting Started' section.
Installation Overview
The installation involves connecting the Maestro RR interface to your vehicle's wiring harness and the aftermarket radio. Key steps include:
- Locating and connecting to the vehicle's OBDII connector.
- Connecting the Maestro RR module to the appropriate vehicle wiring harnesses.
- Connecting the module to your aftermarket radio.
For precise wiring details, consult the Wiring Diagram and Vehicle Wire Reference Chart provided within this document.
Support and Resources
If you encounter any issues during installation or require further assistance, iDatalink offers comprehensive support:
- Phone Support: 1 866 427-2999
- Email Support: support@idatalink.com
- Online Support: maestro.idatalink.com/support
- Community Forum: www.12voltdata.com/forum
Automotive Data Solutions Inc. (ADS) recommends that installations be performed by a certified technician.
