Catch Alert Connect SuperCat

Introduction

The Catch Alert Connect SuperCat device interacts via Bluetooth with the SWISSINNO app on your smartphone or tablet. This allows you to receive push notifications for any activity of the rodent trap.

Precautions & Important Information

• Carefully follow the use instructions for the rodent traps to avoid accidents or injuries.
• The Catch Alert device must be kept dry. It is rated IP42.
• Children should be supervised to ensure they do not play with the device. Batteries and the battery cover are small parts that could be swallowed by infants and children.
• Remove batteries when the device is not in use.
• Do not attempt to open the device or access its internal parts.
• Do not operate the device if it malfunctions, is dropped, or is damaged.
• Do not use the device in wet or damp areas, do not submerge it in water or other liquids.
• Keep the device away from heat sources like radiators, stoves, ovens, and fire.

Contents

• 1 unit

How Your Product Operates

The rodent trap is placed on the device's platform. When the device senses that the trap has 'tripped', it sends a signal via Bluetooth to the smartphone or tablet.

Installation

1. Download and install the SWISSINNO app from the Apple or Android app store (Android Version 11 and above).
2. Start the SWISSINNO app on your smartphone or tablet. Accept Bluetooth connections and optional notifications.
3. Open the battery compartment of the Connect SuperCat device and install 2x AAA 1.5V batteries, ensuring correct polarity.
4. Hold the device close to your mobile phone or iPad for initial activation. The device will connect automatically with the SWISSINNO app, showing as "Connect SuperCat 1".
5. The device is now connected and fully functional. You can change the device name in the settings menu if desired.
6. Position the device under the mouse or rat trap as shown in the accompanying diagrams. If the device activates during this process, reset it via the app.
7. The Connect SuperCat device will notify all connected phones and tablets of any catch activity. Keep the SWISSINNO app running to ensure continuous notifications. Adjust night mode settings to postpone noisy notifications during specific periods.

Maintenance and Cleaning

The device requires minimal maintenance. Replace batteries when indicated in the app. Clean the outside with a soft, damp cloth. Do NOT use abrasive cleaners or chemical agents.

Disposal

Dispose of all parts appropriately and safely, in compliance with national regulations and local environmental standards. Do not dispose of this electrical product in regular household waste; take it to your local waste recycling centre or civic facility. Packaging materials (PET and paper) are recyclable.

2-Year Guarantee

The SWISSINNO Catch Alert Connect SuperCat is guaranteed against defects due to faulty workmanship or materials for 2 years from the date of purchase. Damage caused by inappropriate use is not covered. SWISSINNO is not liable for consequential damages.

Technical Data

• Power input: 2x AAA batteries
• Current consumption: 100 μA average, 12 mA max.
• Battery run time: up to 12 months
• IP Protection class: IP42, avoid condensing moisture
• Communication protocol: Bluetooth
• Maximum radio emission power: 2 mW
• Operating frequency: 2.402 to 2.480 GHz
• Coverage area: up to 200m in free space
• Item No.: 1 272 000US
• FCC ID: 2BOBB-1272000US
• IC: 33702-1272000US
• Complies with CAN ICES-003(B)/NMB-003(B)
• Designed by SWISSINNO SOLUTIONS AG. Made in PRC.
• Product & Brand of SWISSINNO SOLUTIONS AG.

FCC & IC Compliance

This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment causes harmful interference to radio or television reception, try to correct the interference by:

• Reorienting or relocating the receiving antenna.
• Increasing the separation between the equipment and receiver.
• Connecting the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consulting the dealer or an experienced radio/TV technician for help.

FCC & IC Radiation Exposure Statement: This equipment complies with FCC and Canada radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Company Information

SWISSINNO SOLUTIONS AG
Rosenbergstrasse 36, CH-9000 St.Gallen
Switzerland
www.swissinno.com