CarlinKit CCPA Instruction Manual

Connection Diagram

Illustrates the connection methods for the device.

CarPlay Connection

Diagram shows the device connecting to a car's display for CarPlay functionality.

Android Auto Connection (Optional function)

Diagram shows the device connecting to a car's display for Android Auto functionality.

Product Specifications

• Power input: 5V⎓1A
• Power consumption: 0.75W
• Power output: 5V⎓1A
• Compatible resolution: 800*480 / 1024*600 / 768*1024 / 800*1280 / 1280*720 / 1920*1080 / 1080*1920 / 1280*480
• Screen ratio: Various resolutions supported

APK Installation Method 1

Instructions for installing the APK via the car's browser.

1. Click the browser on the car, enter the download link (http://121.40.123.198:8080/AutoKit/AutoKit.apk), and download the APK.
2. Click the "Download Directory" to find the downloaded APK file and click Installation.

Note:

• Operations require the car to be connected to the network.
• If the U disk mode does not appear after plugging in the device for about 30 seconds, connect the mobile phone to the device's WiFi (signal with prefix "auto"), password "12345678". Enter "192.168.43.1" with the phone's browser to access the background and restore factory settings.

APK Installation Method 2

Instructions for installing the APK via a USB flash drive.

1. Enter the download address (http://121.40.123.198:8080/AutoKit/AutoKit.apk) on your computer browser, download the APK, and copy it to a USB flash drive.
2. Insert the USB flash drive into the car's USB interface, find the APK file in the "File Manager", and click to install it.

APK Installation Method 3

Instructions for installing the APK directly from the device.

1. Click into the APK and follow the prompts to insert the product into the car's USB port.
2. The device will prompt to install the application. Confirm the installation.

USB Data Cable Connection (CarPlay / Android Auto)

Instructions for wired connection.

1. Insert the product into the car's USB port.
2. Connect iPhone / Android phone to the product by data cable to realize wired CarPlay / wired Android Auto.

Note: It is recommended to use the original data cable / high-quality third-party data cable / MFi certified data cable.

Wired Screen Mirroring Connection (Only iPhone)

Instructions for screen mirroring using a data cable.

1. First, click into the APK and insert the product into the car's USB port.
2. Select "Mirror" in "iPhone Mode" within the settings.
3. Use the data cable to connect the mobile phone and the product to realize the Screen Mirroring function.

Application Scope

• Support iPhone 6 and above models, applicable to iOS 10 and above.
• Support Android 9.0 and above mobile phones; some Android mobile phones require Android 11.0 and above.
• Supported car models: Android system navigation host, Android version 4.2 or above.

Connection Instructions for Wireless Carplay

Instructions for wireless CarPlay connection.

1. Insert the product into the car's USB port.
2. Connect iPhone / Android phone to the product by data cable, you can realize wired CarPlay / wired Android Auto.
3. Open the mobile phone's WiFi and Bluetooth. Find the "AutoKit" signal on the Bluetooth interface, click and confirm to use CarPlay.

Connection Instructions for Wireless Android Auto

Instructions for wireless Android Auto connection.

1. Download and install Android Auto from the Google Play Store.
2. Check the Android Auto operating environment and update Google services.
3. Turn on Bluetooth and connect.

Note: Check if your phone supports wireless Android Auto.

Application Settings

Settings related to device performance and compatibility.

• Detection
• Device
• Fluency
• Compatible
• CarPlay
• Use Bluetooth
• Turn Bluetooth on when Android Auto is running
• Screen on
• Always on
• Wireless projection
• Enable wireless projection
• Enable wireless projection to a car screen