MiBoxer WL5-WP Waterproof 5-in-1 WiFi LED Controller

1. Features

• Waterproof LED controller suitable for outdoor use.
• Supports brightness, color temperature, RGB, RGBW, and RGB+CCT output modes.
• Built-in WiFi module (IEEE 802.11b/g/n 2.4GHz) and 2.4GHz RF communication module.
• Supports Smartphone APP (MiBoxer) and RF Remote control.
• WiFi wireless control.
• 16 Million colors to choose from.
• Supports Amazon Alexa and Google Assistant control.
• Adjustable color temperature: 2700K~6500K.
• Smartphone APP control.
• Adjustable brightness/saturation.
• Compatible with 2.4GHz RF remote controllers.
• Timing ON/OFF functionality via APP.
• Signal transmitting & modes synchronization capabilities.
• Group control randomly by APP.
• DMX512 controllable (requires DMX512 LED transmitter).
• Waterproof and dustproof grade: IP67.

2. Parameters

Model No.: WL5-WP

Input Voltage: DC12V~36V

Output: 6A/Channel

Total Output Max: 20A

Communication Mode: WiFi-IEEE 802.11b/g/n 2.4GHz

RF: 2.4GHz

Remote control distance: 30m

Working Temperature: -20~45℃

3. Function Instruction

3.1. Switching Output Mode

Short press the "[SET button]" to switch the output mode. The indicating light flickering signifies a successful switch. Different colors of flickering correspond to different output modes:

3.2. Signal transmitting

One lighting fixture can transmit signals from the remote control to another lighting fixture within a 30m range. As long as there is a lighting fixture within 30m, the remote control distance can be effectively limitless.

3.3. Modes synchronization

Different lighting fixtures can operate synchronously when started at different times, controlled by the same remote, under the same dynamic mode, and within a 30m distance. This ensures coordinated lighting effects.

Diagram Description: Shows multiple controllers connected wirelessly, with arrows indicating signal transmission and synchronization over a 30m distance.

3.4. Dynamic Mode Sheet

Note: This sheet is only applicable for RGB, RGBW, and RGB+CCT output modes.

4. Connect diagram

Controller input voltage must match the required voltage of the LED Strips. Ensure correct connection of positive ([V+]) and negative ([V-]) terminals.

Input: DC12V-36V

Wire Colors: Brown: [V+], Blue: [V-]

Connect to LED lamps.

Note: The connection method varies depending on the output mode. Please connect according to the table below.

Output Mode (LED Wiring)

Diagram Description: Shows connection diagrams for Single Color, Dual White, RGB, RGBW, and RGB+CCT output modes, illustrating how to connect the controller's output terminals (V+, R, G, B, W, CW, WW) to the corresponding LED strip inputs.

• Single Color LED lamps: Connect [V+] to the LED strip's V+ and the controller's Black terminal to the LED strip's V-.
• Dual White LED lamps: Connect [V+] to the LED strip's V+, CW to the controller's Red terminal, and WW to the controller's Green terminal. Connect the controller's Black terminal to the LED strip's V-.
• RGB LED lamps: Connect [V+] to the LED strip's V+, R to Red, G to Green, B to Blue. Connect the controller's Black terminal to the LED strip's V-.
• RGBW LED lamps: Connect [V+] to the LED strip's V+, R to Red, G to Green, B to Blue, W to White. Connect the controller's Black terminal to the LED strip's V-.
• RGB+CCT LED lamps: Connect [V+] to the LED strip's V+, R to Red, G to Green, B to Blue, CW to White, WW to Yellow. Connect the controller's Black terminal to the LED strip's V-.

5. RF Remote Link / Unlink

Link:

1. Short press the "[Link/Unlink button]" once on the LED controller (or switch off the controller power, wait 10 seconds, then switch it back on). The indicator light will flash red and green alternately.
2. Short press the Link/Unlink button on the remote control (e.g., the "[ON button]" or similar) 3 times within 3 seconds. The green light flashing 3 times slowly indicates successful linking.

Unlink:

Long press the "[Link/Unlink button]" on the LED controller for 3 seconds. The red light flashing 10 times quickly indicates successful unlinking. (Alternatively, follow the unlinking steps provided in the remote's instruction manual.)

Note: Remote controllers must be purchased separately. Refer to the remote's instruction manual for specific linking and unlinking procedures.

Compatible with these remote controls (Purchased separately):

[FUT089], [FUT088], [FUT092], [FUT096], [FUT006], [FUT007], [B8], [B0], [B1/T1], [B2/T2], [B3/T3], [B4/T4]

6. MiBoxer APP Control

1. Long press the "[SET button]" for three seconds. The device enters WiFi configuration mode when the [Red Indicator] is blinking.
2. Log in to the MiBoxer APP. Click the "[➕]" icon in the top right corner, then select "Waterproof LED controller (WL5-WP)". Follow the on-screen prompts to complete the device adding process.

Indicating light instruction:

7. Attention

• Please verify that the input voltage of the constant voltage power supply matches the controller's requirements. Also, check the connection of both the positive ([V+]) and negative ([V-]) terminals.
• Non-professional users should not dismantle the controller directly, as this may lead to fire hazards or electric shock.
• Avoid using the controller in areas with strong magnetic fields or near metal objects, as this can negatively affect the control distance.

Compliance marks: CE, UKCA, RoHS. Made in China.

MiBoxer APP User Instruction

1. APP Downloading

• For iOS System: Search for "MiBoxer" on the App Store (requires iOS 9.0 or later).
• For Android System: Search for "MiBoxer" on Google Play (requires Android 5.0 or later) or scan the provided QR code to download the APP.

Diagram Description: A QR code is displayed for downloading the MiBoxer APP.

2. Register MiBoxer Account

Open the MiBoxer APP, tap the "Register" button, complete the registration process, and then log in.

Screenshot Description: Shows the MiBoxer app login screen with fields for country code, email, password, and checkboxes for service agreement, along with "Log in", "Register", and "Forgot Password" buttons.

3. Add Device

1. On the device list screen, tap the "[➕]" icon in the top right corner.
2. Select the device type you wish to add and follow the APP's instructions to complete the adding process.
3. After successful addition, return to the device list and pull down to refresh the list to get the device's current status.

Screenshot Description: Shows the "Device List" screen with a "+" button and a list of devices, including "Waterproof Controller", "2.4GHz Gateway", etc., with ON/OFF toggles.

4. Modify device name or delete device

Slide the device entry in the list to the left. Tap "[Edit Icon]" to modify the device name, or tap "[Delete Icon]" to remove the device.

Note: If a device has been shared with others, deleting it will also remove it from your friends' device lists.

Screenshot Description: Illustrates sliding a device entry left to reveal "Edit" and "Delete" options.

5. Group Control

1. Tap the "[Group Tab]" icon to switch to the Group list. Then, tap the top right icon on the Group list to create new groups.
2. Slide a group entry to the left to access "Edit" or "Delete" options for the group.

Note: Group control functions primarily within the MiBoxer APP and may not work with voice control. For voice control of groups, use a compatible third-party APP.

Screenshot Description: Shows the "Group List" screen with options to create groups and edit/delete existing ones like "Meeting Room" and "Bedroom".

6. APP Control

From the device list or group list, tap the desired device or group to enter the Dimming Interface. Use the controls to adjust settings.

• Tap "S+" to increase speed under dynamic mode.
• Tap "S-" to decrease speed under dynamic mode.

Screenshot Description: Displays the dimming interface for a controller, showing RGB color selection, saturation, Kelvin temperature, brightness sliders, and controls for dynamic modes (S+, S-, White Light, Timer).

7. Third Party Voice Control Instructions

Search for "Mi-Light Smart" on your third-party platform APP and follow the setup instructions. On the MiBoxer APP home page, tap the "[Voice Control Icon]" in the top left corner, then select "Voice Control" to view detailed instructions.

Screenshot Description: Shows the MiBoxer APP main menu with options like "Log Out", "Setting", "Shared Device", and "Voice Control".

8. Sharing Device

Share device control with friends. They can then control the device.

1. On the MiBoxer APP home page, tap the "[Share Icon]" in the top left corner.
2. Tap "Shared Device" to go to "My sharing", then tap "Add sharing". (Note: A device that has been received via sharing cannot be shared again.)
3. Tap on an existing shared entry (e.g., "Jack jack@milight.com") to edit sharing permissions, or slide left to delete the sharing.

Screenshot Description: Shows the "My sharing" screen with sections for "Sent sharing" and "Received sharing", listing shared users and options to edit or delete sharing.