Johnson Controls Smart Equipment Control Technical Bulletin

Johnson Controls presents the Smart Equipment Control (SEC) platform, a unified system for commercial unitary, chiller, and air handling products. This technical bulletin focuses on the SEC Unit Control Board (UCB), the primary system controller, which integrates essential functions like compressor protection, indoor blower control, and advanced ventilation management.

Key Features and Capabilities

Provides flexibility for comfort control via wall thermostats, thermistor sensors, and communicating NetSensors.
Supports integration with Building Automation Systems (BAS) for communicated sensor values.
Offers technicians and end-users access to control parameters through an on-board interface or the Mobile Access Portal (MAP) Gateway.
Enables backup, restore, and firmware upgrades via the on-board USB port.
Supports networking through BACnet MSTP, Modbus, and N2 protocols, with LON support via an external gateway.
Features a modular design allowing connection of additional controllers such as UCB-2, 4-stage controllers, Economizer controllers, and Fault Detection Diagnostic (FDD) modules.

Document Overview

This bulletin details the SEC system's menus, operational sequences, alarm management, fault detection diagnostics, and provides a comprehensive USB display menu guide. It serves as a technical resource for understanding and managing the Smart Equipment Control system.

Document Identifier: LIT-12011998-UTB-B-0418

	Smart Equipment Control (SEC) Technical Bulletin This technical bulletin provides comprehensive information on the Smart Equipment Control (SEC) unit control board (UCB), its features, operation, and troubleshooting. It covers system overview, menu navigation, alarm management, and software updates for HVAC systems.
	Johnson Controls Smart Equipment Controls (SEC) Product Bulletin \| HVAC DDC Solutions Explore Johnson Controls Smart Equipment Controls (SEC) for advanced HVAC DDC solutions. This product bulletin details features, benefits, and technical specifications for RTU and SPU control, including FDD, economizer, and communication capabilities for enhanced comfort and energy efficiency.
	Simplicity SE SMART Equipment Controls Technical Guide for HVAC Systems Explore the Simplicity SE (SMART Equipment) Controls Technical Guide by Johnson Controls. This guide details advanced Direct Digital Control (DDC) solutions for standard Rooftop Units (RTUs), including split systems and heat pumps. Learn about innovative features like Fault Detection Diagnostics (FDD), economizer control, and seamless integration with Building Management Systems (BMS) via BACnet, Modbus, and N2 protocols. Optimize HVAC performance, reduce installation costs, and enhance energy efficiency with Simplicity SE controllers, economizers, and network sensors.
	Johnson Controls Smart Equipment Controls (SEC) Product Bulletin for HVAC Systems Comprehensive product bulletin detailing Johnson Controls Smart Equipment Controls (SEC) for HVAC systems, including features, benefits, technical specifications, and compatibility with Metasys® software for enhanced building management.
	Simplicity SE (SMART Equipment) Controls Technical Guide for HVAC Systems Explore the Simplicity SE (SMART Equipment) Controls Technical Guide, detailing advanced DDC controllers for HVAC rooftop units. Learn about features like Fault Detection Diagnostics (FDD), economizer control, and seamless integration with Building Management Systems (BMS) via BACnet, Modbus, and N2 protocols. This guide covers product specifications, operational modes, and accessories for optimized energy efficiency and occupant comfort in light commercial applications.
	Smart Equipment Controls (SEC) Quick Start Guide for Unit Controllers This quick start guide provides essential instructions for configuring Johnson Controls Smart Equipment Controls (SEC) unit controllers, covering initial setup, LCD navigation, commissioning menus, and system configuration backup procedures for models like SE-SPU1001-1 and SE-ECO1001-1.
	Johnson Controls Smart Equipment Controls Quick Start Guide for HVAC Systems A comprehensive quick start guide for Johnson Controls Smart Equipment Controls, detailing Unit Control Board (UCB) LCD navigation, system configuration, firmware updates, and troubleshooting for HVAC and Rooftop Unit (RTU) applications.
	Smart Equipment Controls Quick Start Guide - Johnson Controls UCB Firmware 3.3.1.186 This Quick Start Guide provides essential instructions for configuring and updating Johnson Controls Smart Equipment™ Unit Control Boards (UCB) with firmware version 3.3.1.186. Learn how to navigate the local LCD, perform system configuration backups, update firmware, and understand key menu options for various HVAC applications.

Key Features and Capabilities

Document Overview

Related Documents