Installation Instructions: Skyline Mini Floodlight (10780/10782/10784/10786)
Date: 29.11.2023 | Revision: 1
Important Information
We recommend that luminaires are installed by a qualified electrician ensuring the installation complies with current IEE wiring regulations BS7671:2018 & local building control.
- BELL will not accept responsibility for any claims arising from a poor installation.
- The light source of this luminaire is not replaceable: when the light source reaches end of life, the whole luminaire must be replaced.
- Always switch off mains supply before installing.
- Operating Temperature: -20°C to +40°C
- External use only
Product Disposal
This product may contain substances that can be hazardous to the environment if not disposed of properly. Electrical and electronic equipment should never be disposed of with general household waste but must be separated for its correct treatment and recovery. Where possible, recycle your packaging. ♻️
Certifications and Ratings
CE UKCA IEC 60598 IP65 Ambient Temperature 25°C [outdoor/lighting use] CE [distance 0-5m] [light beam] [light projection] ⏚ EAC
Specifications
| 10W | 20W | 30W | 50W | |
|---|---|---|---|---|
| POWER | 10W | 20W | 30W | 50W |
| LUMENS | 1100lm | 2200lm | 3300lm | 5500lm |
| DIMENSION (LxWxH) | 91x100x28 mm | 112x114x28 mm | 142x135x28 mm | 183x172x28 mm |
| COLOR TEMPERATURE | 4000K | |||
| LIFETIME | 20,000 hours | |||
| BEAM ANGLE | 100° | |||
Installation Guide
Read these instructions before installation and retain for future reference. This equipment should be installed by a competent electrician.
Step 1: Electrical Connection Preparation
Ensure the mains supply is switched OFF ?. The diagram shows the wiring terminals (Live, Neutral, Earth) and a circuit breaker/switch labeled [OFF switch]. A warning symbol ⚠️ indicates electrical safety precautions.
Step 2: Drilling Pilot Holes
Use a [drill] to create pilot holes for mounting. The dimension 'd' indicates the required spacing for the mounting bracket.
Step 3: Securing the Mount
Insert [wall anchors] into the drilled holes and use a ? to gently tap them in. Prepare the [screws] for attachment.
Step 4: Attaching the Fixture
Mount the floodlight fixture onto the bracket using the provided [screws].
Step 5: Enclosure Check
Ensure the floodlight enclosure is properly sealed.
Step 6: Wiring
Connect the mains supply wiring: Green/Yellow to Earth ⏚, Blue to Neutral (N), and Brown to Live (L). The connector is rated IP65.
Step 7: Adjusting Angle
Adjust the floodlight's mounting bracket to the desired angle, allowing for up to 150° of adjustment ?.
Step 8: Operation
Turn the floodlight on using the switch [hand operating switch].
Mounting Dimensions (Dimension 'd')
| Model | Dimension 'd' |
|---|---|
| 10W | 40-49mm |
| 20W | 56-65mm |
| 30W | 81-90mm |
| 50W | 117-126mm |
Contact & Support
Technical Helpline: +44 (0)1924 893380
Website: www.belllighting.co.uk
British Electric Lamps Ltd
Unit A Foxbridge Way
Normanton Ind Est, Normanton, West Yorkshire. WF6 1TN
T: +44 (0)1924 893380 | F: +44 (0)1924 894320 | E: sales@belllighting.co.uk
