Tronsmart Apollo Q10 Headset User Manual

Welcome

Thank you for purchasing the Tronsmart Apollo Q10 Headset. Please read the user manual before use and keep it handy for future reference. If you have any additional questions or comments, please contact us by email at: support@tronsmart.com

Package Contents

• 1 x Apollo Q10 Headset
• 1 x Type-C charging cable
• 1 x Warranty card
• 1 x User manual
• 1 x PU storage bag

Button Instruction

The headset features several buttons and controls:

• 1. MFB button (Multi-function button): Used for various functions like play/pause, answering calls, etc.
• 2. Power button: Used for turning the headset on/off and entering pairing mode.
• 3. Touch panel: Allows for gesture controls like volume adjustment and track skipping.
• 4. LED indicator: Provides visual feedback on the headset's status (pairing, charging, battery level).
• 5. Type-C charging port: For charging the headset.
• 6. Earcups: The parts that cover the ears.

Diagram shows a side view of the headset with numbered callouts pointing to the MFB button (1), Power button (2), Touch panel (3), LED indicator (4), Type-C charging port (5), and Earcups (6).

Specifications

Power Operations

Power On/Off

Press and hold the power button for 2 seconds to power on/off.

Indicator light status: The indicator light flashes blue when powering on. The indicator light goes off when powering off.

Diagram shows a finger pressing the power button for 2 seconds to turn the headset ON. Another diagram shows a finger pressing the power button for 2 seconds to turn the headset OFF.

Bluetooth Pairing with your Device

When the headset is powered off: Press and hold the power button for 2 seconds. The indicator light will flash red and blue together with a sound prompt, entering pairing mode.

When the headset is powered on: Double-click the power button to enter pairing mode again. If a Bluetooth device is currently connected, it will disconnect the Bluetooth and enter pairing mode.

How to Reset if the Headset is Malfunctional

1. Power on the headset.
2. Press and hold the MFB button and the power button for 5 seconds to disconnect Bluetooth and enter pairing mode.
3. When the indicator light flashes red and blue, the pairing settings will be cleared, and the reset is completed.

Diagram shows a finger pressing the power button for 2 seconds (labeled "On: 2s"). Another diagram shows a finger holding the MFB and power buttons for 5 seconds (labeled "hold 5s").

Touch & Button Control

Music and Media Control ♫

Voice Assistant Control ?

Phone Call Control ?

How to Activate ANC Mode Without Pairing

Follow these steps to activate Active Noise Cancellation (ANC) without pairing your phone:

1. Power on the headset but do not pair it with your phone. (The indicator light flashes red and blue).
2. Switch to the ANC mode. The indicator light will flash blue slowly after 5 minutes.
3. Double-tap the power button to wake up the headset and enter Bluetooth pairing mode. (The indicator light flashes red and blue).

Disconnect and Reconnect

1. After the headset is disconnected from the currently connected mobile phone, Bluetooth will automatically reconnect within 10 minutes if it remains within the effective connection range.
2. If the headset is disconnected and returns to the effective connection range within 10-20 minutes, Bluetooth needs to be manually reconnected.
3. If the headset is disconnected and returns to the effective connection range after 20 minutes, it will automatically shut down and requires restarting and reconnecting.

LED Indicator

• Pairing mode: The indicator flashes red and blue.
• Paired: The indicator light flashes blue slowly.
• Charging: The indicator light stays red.
• Charging finished: The indicator light stays blue.
• Bluetooth play status: The indicator light flashes blue slowly.
• Low battery level: The indicator light flashes red slowly.

Note: Switch EQ effects or customize button controls via the companion APP.

Care & Maintenance

Do not use any form of detergents or cleaning materials to clean the product, as any type of chemical may render the device unusable. Do not disassemble this product; it contains no user-serviceable parts. Do not drop or jump on it; handle it with care for optimal performance. Keep the product in a dry location. Dust, dirt, and moisture can accumulate on the product's body if stored in an unsuitable place. Do not dispose of this product in fire, as batteries may explode or leak.

Warranty Information

Your Tronsmart Apollo Q10 Headset is warranted to the original owner for 12 months from the date of purchase against defects in material and workmanship under normal use and service. Tronsmart is not responsible for accidental use of this product, and its liability will not exceed the purchase price of the product. If you encounter any problems while using the product, please do not hesitate to contact our customer support team at support@tronsmart.com.

FCC Statement

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

RF Warning Statement:

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.