Tronsmart Hytune S1 All-In-One Portable PA System

Package Contents

• 1 x Tronsmart Hytune S1 All-In-One Portable PA System
• 1 x DC Power Cord
• 1 x 3.5mm Aux-in Cable
• 1 x Warranty Card
• 1 x User Manual

Product Features and Modes

Aux Input

Connect a line-level sound source to the Aux input via a 3.5 mm cable. Anything connected via the Aux input will automatically override any paired Bluetooth device.

USB Flash Drive Mode

The speaker will play music from your U-disk when plugged into the slot. U-disk memory shall not exceed 64GB.

Karaoke Mode

Insert a wired microphone into the microphone port. The speaker will automatically switch to microphone mode. You can separately adjust the volume using the microphone's volume knob. Note: Before plugging in the microphone, turn down the microphone volume via the main volume knob or microphone volume knob to ensure volume balance.

Guitar Mode

Plug the guitar (or another Hi-Z instrument) into the guitar jack. The output can be mixed with playback from Bluetooth, U-Disk, or Aux-in. You can separately adjust the volume using the volume knob. Note: Before plugging in the guitar, turn down the guitar volume via the main volume knob or guitar input to ensure volume balance, as the guitar's output signal volume is typically higher than a microphone's.

Auto Power Off

The speaker will power off automatically after 5 hours if it does not pair with any device via Bluetooth or does not play any sound after pairing. The speaker will also power off automatically when on low battery.

Specifications

Control Panel and Ports

The Hytune S1 features a comprehensive set of controls and connection ports:

• ➀ Mic 1: Balanced INPUT for connecting signal sources like mixing consoles or microphones. Connections can be made using 6.35mm TRS or XLR connectors. The XLR connector supports 48V phantom power.
• ➁ Mic 2/Guitar: Balanced INPUT for connecting signal sources like mixing consoles, instruments, or microphones. Connections can be made using 6.35mm TRS or XLR connectors.
• ➂ OTG: Used for Live Streaming.
• ➃ Live: 3.5mm Line-in for Live Streaming.
• ➄ Aux-in: 3.5mm Audio Cable to connect a line-level audio source.
• ➅ USB-A Port: Used for U-Disk Playing Mode.
• ➆ Monitoring: Used for Headphone Input to monitor live streaming.
• ➇ Charging Indicator: Indicator stays red while charging, and stays green when fully charged.
• ➈ XLR out: XLR output sends either the mix of all input signals or the stereo L or stereo R signal to another loudspeaker or subwoofer.
• ➉ Feedback Suppression: Press once to switch to the previous track; press and hold for 2 seconds for feedback suppression.
• ⑪ Bluetooth Reset: Press once to play/pause music; press and hold for 2 seconds to restore to factory settings.
• ⑫ Mute: Press once to switch to the next track; press and hold for 2 seconds to mute/unmute.
• ⑬ System Reset: Press once to switch among playing modes; press and hold for 2 seconds to reset.
• ⑭ Power On/Off: Press and hold for 2 seconds to turn on/off; press and hold for 10 seconds for a forced shutdown.
• ⑮ Mic 2 Volume Knob: Rotate clockwise/counterclockwise to turn the microphone/guitar volume up/down.
• ⑯ Bass (Mic/Guitar): Rotate clockwise/counterclockwise to adjust the low-frequency balance of the microphone or instrument.
• ⑰ Midrange (Mic/Guitar): Rotate clockwise/counterclockwise to adjust the mid-frequency balance of the microphone or instrument.
• ⑱ Treble (Mic/Guitar): Rotate clockwise/counterclockwise to adjust the high-frequency balance of the microphone or instrument.
• ⑲ Effect Modes Knob (Mic/Guitar): Rotate clockwise/counterclockwise to adjust the amount of effect modes applied to the microphone or instrument.
• ⑳ LED Display: Indicates the playing status of the speaker.
• ㉑ Music Volume Knob: Rotate clockwise/counterclockwise to turn the music volume up/down.
• ㉒ Bass (Music): Rotate clockwise/counterclockwise to adjust the low-frequency balance of the music.
• ㉓ Treble (Music): Rotate clockwise/counterclockwise to adjust the high-frequency balance of the music.
• ㉔ Main Volume Knob: Rotate clockwise/counterclockwise to turn up/down the main volume (music volume, microphone volume, guitar volume).
• ㉕ Mic 1 Volume Knob: Rotate clockwise/counterclockwise to turn the microphone volume up/down.
• ㉖ Bass (Mic 1): Rotate clockwise/counterclockwise to adjust the low-frequency balance of the microphone.
• ㉗ Midrange (Mic/Instrument): Rotate clockwise/counterclockwise to adjust the mid-frequency balance of the microphone or instrument.
• ㉘ Treble (Music): Rotate clockwise/counterclockwise to adjust the high-frequency balance of the music.
• ㉙ Effect Modes Knob (Mic): Rotate clockwise/counterclockwise to adjust the amount of effect modes applied to the microphone.
• ㉚ Down: Switch to previous menu modes.
• ㉛ Menu: Switch menu modes among Anti-howl, Mic Priority, +48V phantom power, Channel 2 (Switch between microphone/guitar), and mix on/off.
• ㉜ Up: Switch to next menu modes.
• ㉝ Effect Modes Switch: Switch effect modes among Reverb, Echo, and Echo+Reverb Modes.
• ㉞ Volume Knob for Live/Monitoring/Aux-in: Rotate clockwise/counterclockwise to turn up/down Live/Monitoring/Aux-in volume.
• ㉟ Charging Port: Plug the power cord into the charging port.

Connection Scenarios

There are 4 recommended ways to place the Hytune S1 for optimal sound projection:

Elevated Surface

Place the Hytune S1 on a stable, elevated surface to deliver clear, balanced sound across the entire audience, ensuring full-frequency audio performance.

Tilt-Back

For intimate performances, tilt the Hytune S1 back slightly to direct sound toward nearby listeners. Position yourself to the side of the speaker to avoid blocking audio for the audience.

Monitor

To use the Hytune S1 as a personal floor monitor, place it horizontally on the ground facing you, then tilt it upward on its side edge for optimal sound projection.

Speaker Stand

For general sound reinforcement, mount one or two Hytune S1 systems on speaker stands (sold separately).

Charging

Anytime your Hytune S1 is plugged into DC power and the system is not in use, the battery is charging.

Indicator Status:

• Charging: [Charging Indicator] (Indicator stays red)
• Fully-charged: [Fully Charged Indicator] (Indicator stays green)
• Low battery: [Low Battery Indicator] (Indicator flashes red)

Power On/Off

Press the [Power Button] for 2 seconds to turn the device on or off. Press and hold for 10 seconds for a forced shutdown.

Bluetooth Connection

On your device, enable Bluetooth, search for 'Tronsmart Hytune S1', and click to connect.

Tronsmart App

Download the 'Tronsmart App' via [Google Play] or [App Store].

How to Connect Tronsmart App?

1. Turn on Bluetooth setting on your device, search & click 'Tronsmart Hytune S1' to connect.
2. Open the 'Tronsmart' App & allow it to access Bluetooth on your device.
3. Slide to find 'Hytune S1' & click to connect.
4. If connected successfully, you can customize Equalizers and other settings.

Enable/Disable Stereo Pairing

The Stereo Pairing feature in the Tronsmart app allows you to sync two Hytune S1 portable PA systems for immersive stereo sound.

Care & Maintenance

• Do not use any form of detergents or cleaning materials to clean the product, as any type of chemical may make this device unusable.
• Do not disassemble this product; it contains no user-serviceable parts.
• Do not drop or jump on it; treat it with care for the best performance.
• Keep the product in a dry location. Dust, dirt, and moisture from humidity can accumulate on the product's body if kept in an unfriendly place.
• Do not dispose of this product in fire, as batteries may explode or leak.

Warranty Information

Your 'Tronsmart Hytune S1 All-In-One Portable PA System' is warranted to the original owner for 12 months from the date of purchase against defects in material and workmanship under normal use and service. Tronsmart is not responsible for the accidental use of this product, and its liability will not exceed the purchase price of the product. If you encounter any problems while using the product, please contact the customer support team at support@tronsmart.com.

Safety and Compliance

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna; Increase the separation between the equipment and receiver; Connect the equipment into an outlet on a circuit different from that to which the receiver is connected; Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

RF Exposure Information

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

General Safety Precautions

For your safety and to maintain warranty coverage, do not attempt to disassemble or modify this device.

Designed for optimal performance at altitudes below 2000m (6,500 ft). Operation above this elevation may affect functionality.

Intended for use in temperate environments. Avoid prolonged exposure to tropical conditions (high humidity +30°C/86°F with >80% RH).

Disposal Information

This symbol ♻️ means the product must not be discarded as household waste and should be delivered to an appropriate collection facility for recycling. Follow local rules and never dispose of the product and rechargeable batteries with normal household waste. Correct disposal of old products and rechargeable batteries helps prevent negative consequences for the environment and human health.

To preserve natural resources, please recycle or dispose of the battery properly. Consult your local waste authority for information regarding available recycling and/or disposal options. When the battery runs out, remove the battery from the product housing and cover the battery pack connections with heavy-duty adhesive tape to prevent short circuit and energy discharge. Do not attempt to open or remove any of the components.

Declarations of Conformity

EU/UK Declaration of Conformity

English: Hereby, Shenzhen Geekbuy E-Commerce Co., Ltd. declares that the radio equipment type All-in-one Portable PA System PA3000 is in compliance with Directive 2014/53/EU.

German: Hiermit erklärt die Shenzhen Geekbuy E-Commerce Co., Ltd. dass die Funkanlage des Typs All-in-one Portable PA System PA3000 der Richtlinie 2014/53/EU entspricht.

The full text of the EU/UK declaration of conformity is available at the following internet address: https://www.mediafire.com/folder/65jmr8tkl7wcv/Declaration_of_Conformity(PA3000)-EN (for English) and https://www.mediafire.com/folder/tc98pitdvyetb/Declaration_of_Conformity(PA3000)-DE (for German).