MINISO TWS Semi-in-ear Bluetooth Earphones
Model: 118
Product Overview
This document provides instructions for the MINISO TWS Semi-in-ear Bluetooth Earphones, Model 118.
Package Contents
- TWS Earbuds
- Charging Case
- USB Charging Cable
- User Manual
Product Illustration
The product consists of two wireless earbuds and a charging case. The charging case has a charging port and an indicator light. Each earbud is designed for a comfortable and secure fit within the ear.
Components:
- Left Earbud
- Right Earbud
- Charging Case
- Charging Port [?]
- Indicator Light [?]
Usage Instructions
Pairing
1. Open the charging case and take out the earbuds. They will automatically power on and enter pairing mode.
2. On your device, enable Bluetooth and select "MINISO TWS 118" from the list of available devices to connect.
Wearing the Earbuds
Insert the earbud into your ear canal and gently rotate it until it fits comfortably and securely for optimal sound and stability.
Charging
1. Place the earbuds into the charging case. The indicator light on the case will display the charging status.
2. Connect the provided USB charging cable to the charging port on the case to charge the case itself.
Controls (Touch Area)
- Play/Pause: Tap the touch area once.
- Next Track: Double tap the touch area on the right earbud.
- Previous Track: Double tap the touch area on the left earbud.
- Answer/End Call: Tap the touch area once.
- Reject Call: Press and hold the touch area for 2 seconds.
- Voice Assistant: Triple tap the touch area on either earbud.
Product Specifications
| Specification | Details |
|---|---|
| Bluetooth Version | V5.0 |
| Wireless Range | 10 meters (33 feet) |
| Driver Unit | 13mm |
| Battery Capacity (Earbud) | 30mAh |
| Battery Capacity (Charging Case) | 300mAh |
| Play Time | Approx. 4 hours |
| Charging Time (Earbuds) | Approx. 1.5 hours |
| Charging Time (Case) | Approx. 2 hours |
| Input | DC 5V/1A |
Precautions
- Do not expose the product to water or excessive moisture.
- Avoid using the product in extreme temperature conditions (too hot or too cold).
- Do not attempt to disassemble or modify the product.
- Keep the product and its small parts away from children.
- Clean the product only with a dry, soft cloth.
- Ensure the charging cable and port are properly connected for charging.
Troubleshooting
- No Sound: Verify that the earbuds are charged and successfully connected to your device via Bluetooth. Ensure the volume on your device is turned up.
- Cannot Pair: Make sure Bluetooth is disabled on any other nearby devices. Try resetting the earbuds by placing them in the charging case, closing the lid for approximately 10 seconds, and then reopening it. Attempt pairing again.
- Low Volume: Confirm that the earbuds are correctly positioned in your ears. Gently clean the mesh on the earbuds if it appears obstructed.
- One Earbud Not Working: Place both earbuds back into the charging case, close the lid for about 10 seconds, then open it again. Attempt to re-pair the earbuds with your device.
Product Certification
FCC ID: 2ART4-118
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
