BN-LINK Dual Outlet Digital Timer
Product #: FD60-U6
7 DAY HEAVY-DUTY DUAL OUTLET TIMER
PROGRAMMING & SAFETY INSTRUCTIONS
Applications:
- Lighting
- Heating systems
- Cooling systems
- Indoor sprinklers
- Humidifiers
- Nebulizers
- Aquariums
- Ventilators
Specifications:
Rated Voltage: 115VAC, 60Hz
Max. Load: 15A, 1725W
WARNING
- Electrical shock hazard
- For indoor use only. Use a grounded outlet. Follow local electrical codes.
- Do not exceed electrical ratings.
A. INITIAL SETUP
- Remove sticker: Locate the tab at the top right of the sticker and pull to remove sticker from face of screen.
- Charge the internal battery: If the screen is blank, plug the timer into any outlet for 30 minutes to charge the internal battery.
- Reset the timer: Press the "RESET" button with the tip of a small non-metallic insulated tool, such as a pencil or toothpick. The LCD display will appear as shown in the diagram.
Diagram showing the timer display after reset, with days of the week, time, and ON/AUTO/OFF indicators.
4. Unplug and program timer. Charging the battery allows the programming and setup of the timer to occur from the comfort of your chair!
B. SET UP CURRENT DAY & TIME
Example: If it is 7:30am Friday, please follow below steps to set the current day and time.
- Tap and hold the "CLOCK" button, then tap the "WEEK” button until "Fr" displays on top of the screen.
- Tap and hold the "CLOCK" button, then tap the “HOUR” button until 7:00am displays on the screen. Note: please pay attention to AM/PM.
- Tap and hold "CLOCK” button, and tap “MIN” button until 7:30am displays on the screen.
Diagrams illustrating the timer display during the setting of day, hour, and minute.
C. SET PROGRAM
1. Press the "PROG" button to enter the program setting. You will see the picture.
Example: If you want to turn on a device every day at 8:05am and turn it off at 9:00pm, please follow below steps.
2. Press the "WEEK" button to activate the desired days you would like your timer to operate. The most popular combinations will be programmed into the timer. If you do not see your desired days in any of the combinations, you will need to set multiple schedules into your programs to activate the days desired.
Diagram showing day selection options on the timer display.
Note: Press "WEEK" multiple times until you get the day combination you want.
Day combination options:
- MO to SU
- Individual day: MO,TU,WE,TH,FR,SA,SU
- MO to FR
- SA, SU
- MO to SA
- MO, WE, FR
- TU, TH, SA
- MO, TU, WE
- TH, FR, SA
3. Press the "HOUR” button until 8:00am displays on the screen.
4. Press the "MIN” button until 8:05am displays on the screen.
5. Press the "PROG" button once to set program "1 OFF". You will see the picture. Notice the "1ON" program on your left bottom corner. The "1" symbolizes which of the 8 programs you are on. The word "ON" after the number "1" means this screen is for your ON program schedule only.
Notice the "1OFF" program on your left bottom corner. The "1" symbolizes which of the 8 programs you are on. The word "OFF" after the number "1" means this screen is for your OFF program schedule only.
6. Repeat steps 2 to 4 to set program "1 OFF".
7. If you want to set the second ON/OFF program, press "PROG” button again. You can repeat steps 2 to 6 to set the program, or press the "CLOCK" button to save all your settings and take you back to your clock screen.
Press "R" at any point to cancel the current setting.
Press "R" again will take you back to the previous option.
You can set up to 8 different ON and OFF programs for your timer. To do so, just repeat steps 1 to 6 for program "2 ON", "2 OFF", "3 ON" etc.
Diagrams illustrating setting ON and OFF times for programs.
D. MANUAL OVERRIDE
8. If you want to make the set of programs valid, please press "ON/AUTO/OFF" button to make sure the timer is in AUTO mode.
Attach up to TWO DEVICES to the timer: Plug the devices into the outlets on either side of the timer.
Diagram showing two devices plugged into the timer outlets.
Pressing ON/AUTO/OFF button can manually turn on and off the timer.
- OFF: Press ON/AUTO/OFF button until screen shows OFF. In this status, the timer always has no output. The red LED output indicator on the top is off.
- ON: Press ON/AUTO/OFF button until screen shows ON. In this status, the timer always has output. The red LED output indicator on the top is on.
Diagrams showing the timer display in OFF and ON manual override modes.
Please set timer to AUTO status if you want to turn on and off automatically based on programs you have set.
AUTO STATUS
There are two AUTO status:
- AUTO ON: Press ON/AUTO/OFF button to the ON first, then press to the AUTO. It is ON status of the timer, top red LED indicator is ON, the timer will run the programs as previously set.
- AUTO OFF: Press ON/AUTO/OFF button to the OFF first, then press to the AUTO. It is OFF status of the timer, top red LED indicator is OFF, then the timer will run the programs as previously set.
Diagrams illustrating the timer display in AUTO ON and AUTO OFF modes.
E. SET RANDOM FOR VACATION SECURITY
Pressing the "WEEK” and “HOUR” buttons simultaneously will activate security mode. "O" is to the right side of the display.
When the timer is working in Auto mode and the random function is on, the previously programmed ON and OFF times will be separately postponed by 2-32 minutes.
Diagram showing the timer display with the random function activated.
Press the "WEEK" and "HOUR" buttons again to turn off the Random function.
F. DST - DAYLIGHT SAVING TIME FUNCTION
Press HOUR & MIN simultaneously to activate or deactivate DST.
Note: A small clock symbol "?" will appear on the far right of the LCD screen when DST is active.
It means manually add 1 hour to open the "Summer Time." Otherwise, it returns to current time.
Diagrams showing the timer display with DST activated and deactivated.
G. TROUBLESHOOTING
Timer does not turn on or off.
- Make sure AM and PM are correct on the current time and in the program settings.
- Timer program should be on AUTO setting.
- Make certain that both an ON and OFF time have been specified.
- If the number is not clear or blank on the screen, please plug the timer into any outlet for 30 minutes to charge the internal battery, then press the Reset button.
- The 2 grounded outlets are controlled by the same programs; they cannot be set by different programs.
- If the timer cannot Turn ON or Turn OFF on time, please check if the Random function is in deactive status.
- If the timer is always ON or always OFF, please check if the program is in Auto mode.
TIMER IS NOT WORKING ACCORDING TO YOUR PROGRAMS?! WHATS GOING ON?
If your AUTO setting is not activating your program because you have already passed the start time. Please check the two different AUTO settings available to you and make sure you are choosing the correct AUTO status (ON to AUTO, or OFF to AUTO).
Your ON/AUTO/OFF button has 4 different settings depending how many times you press the button.
The 4 available operations are:
- [[ON]] - Manually turning ON your appliance (Your Appliance will ALWAYS BE ON in this state and will not run any timer programs.)
- [[OFF]] - Manually turning OFF your appliance (Your Appliance will ALWAYS BE OFF in this state and will not run any timer programs.)
- [[ON to AUTO]] - *Start your setting on ON and finish the setting on AUTO* - Your appliance will turn on right when you plug the timer into a live wall outlet. Your appliance will stay on until the 1st program ends and turns off accordingly to the timer. Schedule will run accordingly to the programs set.
- [[OFF to AUTO]] - *Start your setting on OFF, and finish the setting on AUTO* - Your appliance will turn off right when you plug the timer into a live wall outlet, until the next program schedule and will run your program schedules accordingly.
If you need more assistance, we have a helpful short instructional video. Most customers find it helpful. Please enter the model number provided on the back of your product to YouTube and you will find a helpful instructional video made by one of our technical support team members. (https://www.youtube.com)
Contact Information
BN-LINK INC.
12991 Leffingwell Avenue, Santa Fe Springs
Customer Service Assistance: 1.909.592.1881
E-mail: support@bn-link.com
Website: https://www.bn-link.com
Hours: 9AM - 5PM PST, Mon - Fri
Designed in California Made in China
