ALMAÅN

Parts and Tools

Tools Required:

Screwdriver ?

Included Parts:

• 2x Part 10095483 (Bolt)
• 4x Part 105943 (Screw)
• 3x Part 10103953 (Screw)
• 2x Part 100851 (Mounting Plate)

Step 1: Prepare Cabinets

Attach mounting plates to the inside of the cabinet side panels. For each cabinet, two mounting plates (Part 100851) are secured to the inner side panels using bolts (Part 10095483). This is shown for two cabinets that are joined together.

Visual Description: The diagram shows two cabinets positioned side-by-side. The first action involves attaching a mounting plate (100851) to the interior face of a cabinet's side panel using a bolt (10095483). This is repeated for the other side of the cabinet. The close-up view details the mounting plate with multiple holes and the bolt passing through it into the cabinet panel.

Step 2: Attach Legs

Secure the legs to the previously attached mounting plates. The diagram shows screws (Part 105943) being used to fasten the legs to the mounting plates. A close-up illustrates this connection.

Visual Description: The cabinet structure, now equipped with mounting plates, is shown. Legs are then attached to these plates using screws (105943). The detailed view highlights a leg being screwed into the mounting plate.

Step 3: Insert Adjustable Feet

Insert the adjustable feet into the bottom of each leg. The diagram shows the legs being positioned, and then an adjustable foot component is inserted into the lower end of each leg.

Visual Description: The legs are shown attached to the cabinet. An adjustable foot component is then inserted into the bottom of each leg, completing the leg assembly.

Step 4: Secure Leg Assemblies

Attach the complete leg assemblies to the cabinet base. The diagram shows the legs being fastened to the bottom of the cabinet using screws (Part 10103953). A close-up view provides detail on this connection.

Visual Description: The diagram shows the cabinet with legs attached. The final securing of the leg assembly to the cabinet base is depicted using screws (10103953). The close-up view confirms the screw attachment.

Step 5: Adjust Height

Adjust the legs to level the furniture. The diagram shows the assembled cabinets standing on their legs. Arrows indicate that the legs can be adjusted vertically ↕️ for height. A close-up view of an adjustable foot shows rotational arrows ? for fine-tuning the height. The adjustable range is specified as a minimum of 120mm and a maximum of 200mm.