Philips 3000 Series Steam Iron
Model Series: DST3000
Brand: Philips
Getting Started
Welcome to your new Philips Steam Iron. This manual provides essential information for safe and effective use.
Preparation for First Use: Upon initial use, it is normal for a small amount of smoke to be visible. This will cease after a short period. Ensure the iron is prepared according to the instructions provided.
The iron offers adjustable temperature settings for various fabrics: LINEN, COTTON, SILK, SYNTHETIC.
Safety and Compliance
Restricted Substances Compliance
This Philips product complies with relevant regulations concerning restricted substances. The table below indicates compliance for key substances:
| Unit | Lead (Pb) | Mercury (Hg) | Cadmium (Cd) | Hexavalent Chromium (Cr⁶⁺) | Polybrominated Biphenyls (PBB) | Polybrominated Diphenyl Ethers (PBDE) |
|---|---|---|---|---|---|---|
| Power Cord Set | O | O | O | O | O | O |
| Upper Cover | O | O | O | O | O | O |
| Water Tank | O | O | O | O | O | O |
| Temperature Dial | O | O | O | O | O | O |
| Heating Element | O | O | O | O | O | O |
Note: 'O' indicates that the percentage content of the restricted substance does not exceed the reference percentage value.
Operating Your Steam Iron
Follow these steps for optimal ironing:
- Filling the Water Tank: Open the water tank lid ? and fill the tank with water up to the MAX indicator line. Close the lid securely.
- Setting the Temperature: Turn the temperature dial ?️ to the appropriate setting for your fabric type (e.g., LINEN, COTTON, SILK, SYNTHETIC). Wait for the indicator light to go off, signaling the iron has reached the selected temperature.
- Steam Settings:
- For continuous steam, ensure the steam control is set appropriately.
- Use the steam boost function ?⬆️ for stubborn creases.
- Vertical steam ?? can be used to refresh hanging garments.
- Calc-Clean Function: Regularly use the Calc-Clean function ⚙️? to remove scale and maintain steam performance. Refer to specific instructions for the descaling process.
- Auto Shut-Off: Models equipped with Auto Shut-Off ⏳✔️ will automatically turn off the iron if left idle for a period, enhancing safety.
Model Specifications
The Philips 3000 Series Steam Irons offer various specifications:
| Model(s) | Electrical Parameters | Auto Shut-Off |
|---|---|---|
| DST3010, DST3011, DST3020 | 2000-2400 W, 220-240 V, 50-60 Hz | No |
| DST3021, DST3030, DST3031 | 2000-2400 W, 220-240 V, 50-60 Hz | Yes |
| DST3041 | 2200-2600 W, 220-240 V, 50-60 Hz | No |
| DST3040 | 2200-2600 W, 220-240 V, 50-60 Hz | Yes |
Operating and Storage Conditions
To ensure optimal performance and longevity:
- Operating Temperature: +0 °C to +35 °C
- Relative Humidity: 20% to 95%
- Atmospheric Pressure: 85 to 109 kPa
Support
For additional information, user manuals, and support, please visit the official Philips website:
