SONOFF ZBDongle-P User Manual
This manual provides detailed information for the SONOFF ZBDongle-P, a Zigbee 3.0 USB Dongle Plus.
Product Overview
The SONOFF ZBDongle-P is a powerful Zigbee 3.0 USB Dongle Plus that can be used with a variety of smart home hubs and systems. It allows for seamless integration of Zigbee devices into your smart home network.
Installation and Setup
Important Safety Precautions:
- Always disconnect power before installation or maintenance.
- Ensure the device is installed in a dry and well-ventilated area.
- Do not expose the device to water or extreme temperatures.
- Keep out of reach of children.
Installation Steps:
- Insert the ZBDongle-P into a USB port on your computer or smart home hub.
- Follow the specific instructions for your chosen smart home hub software to add the dongle. This typically involves searching for new Zigbee devices and pairing them with the dongle.
Technical Specifications
| Feature | Specification |
|---|---|
| Product Name | ZBDongle-P |
| Model | ZBDongle-P |
| Connectivity | Zigbee 3.0 |
| Interface | USB |
| Operating Temperature | -10°C to 40°C (14°F to 104°F) |
| Dimensions | 75mm x 25mm x 12.5mm |
| Weight | Approx. 30g |
Compliance and Certifications
The SONOFF ZBDongle-P complies with various industry standards and has received certifications including CE, FCC, and RoHS. These certifications indicate that the product meets safety, health, and environmental protection requirements.
CE Marking: Indicates conformity with health, safety, and environmental protection standards for products sold within the European Economic Area (EEA).
FCC Compliance: The device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RoHS Compliance: Restricts the use of specific hazardous materials found in electrical and electronic products.
Troubleshooting
If you encounter issues with your ZBDongle-P, please refer to the following common troubleshooting steps:
- Dongle not detected: Ensure the dongle is properly inserted into the USB port. Try a different USB port or a USB extension cable.
- Zigbee devices not pairing: Make sure the Zigbee devices are within range of the dongle and in pairing mode. Check the hub's software for any error messages.
- Intermittent connectivity: Minimize potential interference from other wireless devices (e.g., Wi-Fi routers). Ensure the dongle is placed in an optimal location.
For further assistance, please consult the SONOFF support website or contact their customer service.
Additional Information
Model Number: ZBDongle-P
Version: V1.5
Manufacturer: ITS Technology Co., Ltd.
Website: https://www.sonoff.com
