Product Overview
The Lutron Athena touchscreen is a wall-mounted digital controller designed to manage Lutron Athena connected lighting and shades. It is managed by a wired Athena Edge processor. The touchscreen interface provides a rich user experience and flexible control for single-zone and multi-zone applications.
Features
- 127 mm (5 inch) diagonal capacitive touch display for controlling Lutron Athena lighting loads and shades.
- 800 x 480 @ 188 ppi; 5:3 aspect ratio.
- Control of Lutron Athena lighting loads, scenes, and zone-level control:
- Intensity
- Color temperature
- Full color, fine tune (Ketra loads only)
- Controls zone-level shades compatible with Lutron Athena, manufactured by Lutron.
- Guided user interface for simple screen setup, no other software required.
- Touch gestures (swipe) supported for simplified navigation.
- Administrator and user PINs for restricted management or control capabilities.
- White glass touchscreen bezel.
- User interface offers manual dark and light mode options.
- Supported languages: English, Spanish, French, German, Italian, Portuguese, Simplified Chinese.
- Landscape orientation only. Mounts in horizontal US single-gang backboxes, UK square backboxes, or EU round backboxes.
- Requires power from an IEEE 802.3af-2003 or 802.3at-2009 Power over Ethernet (PoE) power supply, Lutron Q-POE-PNL model, or other PoE power supply.
- For commercial use only.
Available Models
- Q-TOUCH5-WH - Athena 127 mm Touchscreen (White)
Specifications
Compatibility
- Can be used in Lutron Athena systems.
- Up to 5 Athena touchscreens per Athena Edge processor.
- Compatible with the following Lutron Athena lighting/shade controls:
- LED+ Energi Savr Node PRO Phase Adaptive
- Energi Savr Node control modules with T-Series
- Energi Savr Node control modules with EcoSystem
- Energi Savr Node DALI Universal Control Module
- Energi Savr Node control modules for 0-10 V-=== Volts
- Energi Savr Node control modules with Softswitch
- Energi Savr Node PRO LED+ Phase Adaptive
- Second generation Energi Savr Node control modules with EcoSystem
- Second generation Energi Savr Node control modules for 0-10 V Volts
- Second generation Energi Savr Node control modules with Softswitch
- Athena DIN Power Module (DPM)
- Ketra Clear Connect X type luminaires
- Athena QSE-C1-DMX control interface (1 channel lighting or 3 channel RGB/CMY scene control; refer to QSE-CI-DMX control interface specification for more information)
- Compatible with the following Lutron shading solutions:
- Roller 64
- Sivoia QS wired roller shades
- Sivoia QS wired drapery
Power and Communication
- Must be powered by an IEEE 802.3af-2003 or 802.3at-2009 Power over Ethernet (PoE) power supply, Lutron Q-POE-PNL model, or other PoE power supply.
- Communicates with the wired Athena Edge processor via a system Ethernet link.
Installation
- Suitable for the following backboxes:
- Square 102 mm US single-gang backbox (horizontal installation)
- Standard 50 mm x 96 mm x 65 mm US single-gang backbox (horizontal installation)
- UK square backbox
- EU round backbox
Wiring
- Use minimum Cat5e cable.
- Maximum wire length is 100 m.
- Each touchscreen requires an indoor Ethernet connection back to a PoE switch.
- Do not use PoE wiring outdoors.
Regulatory Approvals
- cULus certified
- FCC compliant
- ICES compliant
- CE compliant
- UKCA compliant
Environment
- Operating temperature: 0°C to 40°C (32°F to 104°F)
- Maximum 90% non-condensing relative humidity
- For indoor use only
Mechanical Dimensions
All dimensions are in millimeters (mm).
Overall Dimensions:
- Width: 140 mm
- Height: 97 mm
- Depth from mounting surface: 16.1 mm
Mounting Hole Patterns:
- US mounting: 83.3 mm (UNC 6-32)
- UK mounting: 60.3 mm (M3.5)
- UK 2-gang mounting: 120.6 mm (M3.5)
- EU mounting: 60 mm (M3/M3.5)
Diagrams illustrate the front and side views of the touchscreen with key dimensions, and various backbox types for installation: US 102 mm x 102 mm wiring box with single-gang mud ring (horizontal), UK square backbox, and EU round backbox.
System Riser Diagram
This section illustrates typical system configurations for the Athena touchscreen.
Configuration 1: Centralized PoE
An Athena Edge processor (QP5) is connected to a PoE switch. The PoE switch provides power and communication to multiple Athena touchscreens via Ethernet connections. An optional Lutron Q-POE-PNL can also serve as a PoE power source, connecting to the PoE switch and then to the Athena touchscreens. All components are connected via Ethernet, adhering to IEEE 802.3af or 802.3at standards.
Configuration 2: Distributed PoE
An Athena Edge processor (QP5) is connected to a network backbone. Multiple PoE switches are also connected to this network. Each PoE switch then powers and communicates with Athena touchscreens. This configuration allows for distributed power and data delivery across a larger network. All connections are Ethernet, adhering to IEEE 802.3af or 802.3at standards.
The diagrams visually represent these two configurations, showing the QP5 processor, PoE switches, Q-POE-PNL (optional), and Athena touchscreens interconnected via Ethernet cables, with a 'floor' or 'network' backbone indicated.
