Parkside Robot Lawnmower Garage PMRG 68 A1

Introduction

Congratulations on the purchase of your new Parkside Robot Lawnmower Garage. This high-quality product has undergone rigorous quality checks and final inspection, ensuring its functionality.

This operating manual is an integral part of the product and contains important information regarding safety, use, and disposal. Please familiarize yourself with all operating and safety instructions before using the product. Use the product only as described and for its intended purpose. Keep the manual in a safe place and pass it on to any third party when transferring ownership of the product.

Intended Use

The robot lawnmower garage serves as weather protection for the robot lawnmower and its charging station. This product is not intended for commercial use. The manufacturer is not liable for damages resulting from improper use or incorrect operation.

General Description

The illustrations can be found on the front fold-out page.

Parts Overview:

• 1 Roof
• 2 Stand foot
• 3 Locking mechanism
• 4 Connecting strut
• 5 Mounting screw
• 6 Internal hexagon screw
• 7 Screw (Fig. A)
• 8 Charging station

Scope of Delivery/Accessories

Unpack the product and check for completeness. Dispose of packaging material properly.

• Roof
• 2x Connecting struts (1x pre-assembled on the roof)
• 2x Stand feet
• 4x Screws
• 6x Mounting screws
• Operating manual

Assembly

Assembly (Fig. A)

Tools (not included in delivery): Phillips head screwdriver

1. Loosen the mounting screws (5) and the internal hexagon screw (6) from the frame.
2. Attach the loose connecting strut (4) with screws (7) to the stand feet (2).
3. Attach the connecting strut (4) with the roof (1) using the screws on the stand feet.
4. Fold down the roof.
5. Secure the roof with the locking mechanisms (3).

Securing the Robot Lawnmower Garage to the Ground (Fig. B)

Tip: Water the ground before installation to prevent the mounting screws from breaking.

Tools: Internal hexagon wrench (6)

1. Place the robot lawnmower garage in the desired location.
2. Secure the robot lawnmower garage to the ground using the mounting screws (5).

Technical Data

Robot Lawnmower Garage: PMRG 68 A1

Dimensions: 69.5 x 68 x 40.5 cm

Safety Instructions

• When selecting a cleaning brush, pay attention to the sensitivity of the surface.
• Be attentive.
• Pay attention to what you are doing and use common sense when working.
• Avoid abnormal body posture.
• Ensure a secure stance and maintain balance at all times.
• Keep your work area tidy. Disorder in the work area can lead to accidents.
• Wear appropriate work clothing. Non-slip footwear is recommended for outdoor work. If you have long hair, wear a hairnet.
• Consider environmental influences. Ensure good lighting of the workplace.
• Only use original accessories and do not make any modifications.

Disposal/Environmental Protection

Dispose of the product and packaging in an environmentally friendly manner. Hand in the product at a recycling facility. The plastic and metal parts used can be separated and recycled. Contact our Service Center for more information. We will dispose of your defective, sent-in devices free of charge.

Spare Parts/Accessories

Spare parts and accessories are available at www.grizzlytools.shop. If you have problems with the ordering process, please use the contact form. For further questions, contact the "Service-Center" (see page 21).

Part List:

Warranty

This device comes with a 3-year warranty from the date of purchase. Statutory rights against the seller are not affected by this warranty. The warranty period begins on the purchase date. Keep your original receipt as proof of purchase. If a material or manufacturing defect occurs within three years of the purchase date, the device will be repaired or replaced free of charge at our discretion. This warranty service requires the defective device and proof of purchase to be presented, along with a brief written description of the defect and when it occurred. If the defect is covered by our warranty, you will receive the repaired or a new device. Repair or replacement does not start a new warranty period.

The warranty does not cover parts subject to normal wear and tear, or damage to fragile parts. The warranty is void if the device is damaged, used improperly, or not maintained according to the operating manual. The device is intended for private use only.

Warranty Claim Procedure

To ensure quick processing of your request, please follow these instructions:

• For all inquiries, please have your receipt and the article number (IAN 462613_2307) ready as proof of purchase.
• The article number can be found on the type plate.
• If functional errors or other defects occur, please contact the service department listed below first. You will then receive further information on how to process your complaint.
• A device registered as defective can be sent postage-paid to the provided service address after consultation with our customer service, including proof of purchase (receipt) and a description of the defect and when it occurred. To avoid problems with acceptance and additional costs, please use only the address provided. Ensure that the shipment is not sent postage due, as bulky goods, express, or other special freight. Please send the device including all accessories supplied at the time of purchase and ensure adequate protective packaging.

Service Center

• Germany: Tel.: 0800 54 35 111, E-Mail: grizzly@lidl.de, IAN 462613_2307
• Austria: Tel.: 0800 44 77 44, E-Mail: grizzly@lidl.at, IAN 462613_2307
• Switzerland: Tel.: 0800 56 44 33, E-Mail: grizzly@lidl.ch, IAN 462613_2307

Importer

Please note that the following address is not a service address. Please contact the service center mentioned above first.

Grizzly Tools GmbH & Co. KG
Stockstädter Straße 20
63762 Großostheim
GERMANY
www.grizzlytools.de

Repair Service

Repairs not covered by the warranty can be carried out by our service department for a fee. We will gladly provide you with a cost estimate. We can only process devices that have been adequately packed and sent postage-paid. Attention: Please send your device cleaned and with a note about the defect to our service department. Devices sent postage due, as bulky goods, express, or with other special freight will not be accepted. We will dispose of your defective, sent-in devices free of charge.