Introduction
The Pulsar RS485-ETHERNET Interface, model INTRE, version 1.1, is a robust device designed to bridge RS485 communication buses with Ethernet networks. It facilitates the conversion of signals, enabling seamless integration of RS485 devices into LAN/WAN environments. This interface is compatible with Pulsar's PSBEN and EN54 series power supplies, making it suitable for various applications, including fire alarm systems.
Key Features
- Ethernet connectivity via RJ45 connector (10/100Mbps).
- Supports RS485 bus communication.
- Galvanic isolation between Ethernet and RS485 interfaces.
- Hermetic enclosure with IP65 protection.
- Operates with 10-30V DC power supply.
- Configurable using Pulsar's PowerConfig and PowerSecurity software.
- 5-year warranty from the production date.
Installation and Configuration
The manual details the installation process, including guidelines for minimizing electromagnetic interference and proper wiring for both RS485 and Ethernet connections. Configuration involves using the dedicated 'PowerConfig' software to set up network parameters such as IP addresses and serial port settings. The 'PowerSecurity' program is used for further connection management.
Software Downloads:
Technical Specifications
The interface supports transmission speeds up to 115200 baud for serial communication and auto-negotiation for Ethernet. It operates within a temperature range of -10°C to 40°C and has dimensions of 121 x 81 x 60 mm.
