Marking_LED2405G8NA E26_NA

Revision Comment

Approved by: [Not specified]

Approved date: [Not specified]

Product Identification

This document outlines the marking and specifications for the IKEA LED2405G8NA E26 LED lamp.

LED Lamp and Marking Position

A visual representation shows an LED lamp with a designated "Marking position" indicated by an arrow pointing to the lamp's base.

Safety Warnings

CAUTION: RISK OF ELECTRIC SHOCK. USE IN DRY LOCATION ONLY. DO NOT USE WITH STANDARD DIMMERS. SEE INSTRUCTIONS.

ATTENTION: RISQUE DE CHOC ÉLECTRIQUE - UTILISER DANS UN EMPLACEMENT SEC UNIQUEMENT. NE PAS UTILISER AVEC DES GRADATEURS STANDARD, SE REPORTER AUX INSTRUCTIONS.

Specifications and Certifications

Technical Specifications:

Voltage: 120V~ 60Hz
Lumen Output: 1100lm
Luminous Efficacy: 136lm/W
Power Consumption: 8.1W
Current: 79mA
Color Temperature: 2700K
Model Number: LED2405G8NA E26
Manufacturing Origin: MADE IN XXX ABCDE (Details for Thailand/China provided below)
Product Series/Name: KAJPLATS CWS YYWW
Canadian Compliance: CAN ICES (B)/NMB(B)
FCC ID: FHO-LED2405G8NA
IC: 10912A-LED2405G8NA

Remark: CWS should be bold.

Certifications and Symbols:

[TÜV Rheinland certification] [CE mark] [recycling symbol] [Wi-Fi symbol] [Bluetooth symbol] [power plug symbol]

Manufacturer: IKEA of Sweden AB, SE-343 81 Älmhult, IKEA.com

Code Generation and Origin Information

QR Code and Manual Code Details

QR Code Content: The QR code contains "MT: Base-38 code". The "MT" value is fixed, while the Base-38 code is dynamically generated using parameters such as Version, Vendor ID, Product ID, Custom Flow, Discovery Capabilities Bitmask, Discriminator, Passcode, Padding, and TLV Data.

Manual Code Generation: A 11-digit numerical code is generated, comprising VidPidPresentFlag, Discriminator, Discriminator, and Passcode. The text font for this code is Arial, 6pt. The digits are derived from VidPidPresentFlag, Discriminator, Discriminator, Passcode, and a Verhoeff checksum.

A visual representation shows a [QR code] and a numerical code, with accompanying labels indicating they are variable and use Arial font, 6pt.

Origin Marking Instructions

For production in Thailand: The marking "Made in XXX ABCDE" should be replaced with "Made in Thailand, 50170". If the original marking is "When Made in Thailand, Made in XXX ABCED", it will be updated to "Made in Thailand 50170".

For production in China: The marking "Made in XXX ABCDE" should be replaced with "Made in China 50050". If the original marking is "When Made in China, Made in XXX ABCED", it will be updated to "Made in China 50050".

Document and Drawing Information

[IKEA logo]

IKEA of Sweden AB

Drawing Details

Description	Name	Replaces document
		No. of Pages: 1 (1)
		Doc number: [Not specified]
		Version: [Not specified]

Document Property Statement: Measurements are according to the SI systems. This drawing is IKEA's property and is covered by industrial and intellectual property rights. Without written consent from IKEA, it should not be copied, reproduced, communicated, or otherwise used for any purpose other than that which has been agreed.

Template Version: 3.0

	TÜV Rheinland Test Report for IKEA LED2405G8NA Bluetooth Lamp This TÜV Rheinland test report details the compliance testing of the IKEA LED2405G8NA, a self-ballasted LED lamp supporting Bluetooth, Zigbee, and Thread, according to FCC and RSS standards.
	TÜV Rheinland Test Report for IKEA LED2405G8NA Self-ballasted LED Lamp This TÜV Rheinland test report details the compliance of the IKEA LED2405G8NA self-ballasted LED lamp with FCC and RSS standards. It includes comprehensive test results for antenna requirements, bandwidth, output power, power spectral density, conducted emissions, and radiated emissions, along with technical specifications and test setup details.
	IKEA Attestation Statement: Not Covered Entity Applicant for FCC Filing - FHO-LED2405G8NA Official attestation statement from IKEA of Sweden AB confirming their status as a not covered entity for FCC filing purposes, referencing FCC ID FHO-LED2405G8NA.
	Confidentiality Request for IKEA Product FHO-LED2405G8NA Confidentiality request submitted by IKEA of Sweden AB to the Federal Communications Commission for the FHO-LED2405G8NA FCC ID, pertaining to self-ballasted LED lamps. Outlines requests for short-term and permanent confidentiality for various technical exhibits.
	IKEA of Sweden AB Authority to Act as Agent for Equipment Certification Official authorization letter from IKEA of Sweden AB appointing TUV Rheinland (Shanghai) Co., Ltd. as its agent for equipment certification processes, including FCC and Industry Canada compliance for self-ballasted LED lamps.
	IKEA LED2405G8NA Self-Ballasted LED Lamp EMC Test Report Comprehensive EMC test report for the IKEA LED2405G8NA self-ballasted LED lamp, detailing conducted and radiated emissions testing against FCC and IC standards. Includes test results, limits, and equipment specifications.
	IKEA LED2405G8NA RF Exposure Compliance Report Technical report detailing the radio frequency (RF) exposure compliance for IKEA's LED2405G8NA self-ballasted LED lamps, including FCC and IC evaluations.
	IKEA LED2405G8NA Zigbee Test Report - RF Compliance Official test report for the IKEA LED2405G8NA self-ballasted LED lamp, detailing RF compliance for Zigbee, Bluetooth, and Thread technologies. Includes conducted and radiated emission tests performed by TÜV Rheinland.