Tellur Wireless Mouse TM-015 User Manual

Product Diagram

The mouse features the following components:

• 1. Left click button
• 2. Right click button
• 3. Scroll wheel
• 4. Mode button
• 5. DPI button
• 6. Indicator light
• 7. Forward button
• 8. Backward button
• 9. USB-C port
• 10. ON-OFF button

The diagram shows the top, side, and bottom views of the mouse, highlighting these numbered components. The bottom view also shows the CE mark and the Tellur branding.

Wireless Connection

1. To turn on the mouse, toggle the power button on the bottom of the mouse.
2. The mouse uses a plug-and-play system and does not require additional drivers.
3. Remove the nano receiver from the mouse and plug it into the USB port of your computer.
4. Press the "Devices" button until the LED on the mouse lights up the wireless sign.
5. The mouse will automatically connect with the computer.

Bluetooth Connection

1. To turn on the mouse, toggle the power button located at the bottom of the mouse. The device will start flashing.
2. Press the "Device" button until the LED on the mouse lights up the Bluetooth 1, 2, or 3 sign.
3. Press and hold the "Device" button for 3 seconds; the Bluetooth 1/2/3 LED will start blinking rapidly.
4. On your device, look for "BT5.2-1 / BT5.2-2 / BT5.2-3" in the list of available Bluetooth devices.
5. Once you identify the mouse in the list of Bluetooth devices, click on its name to connect it. The LED indicator flashes when the mouse is in pairing mode and turns off when the connection is successful.

Technical Specifications

• Connectivity: Bluetooth 5.0 + Wireless 2.4GHz
• Range: Up to 10 meters
• Operating time: Up to 120 hours
• Standby time: Up to 100 days
• Charging time: Approx 4 hours
• Compatible systems: Windows, MAC, iOS, Android
• Multipoint technology: Up to 4 simultaneous connections
• Buttons: 8 + 2 scrollers
• Resolution: 3200 DPI
• Battery capacity: 800 mAh
• Charging connector: Type-C
• Available colours: Black
• Product dimensions: 120mm x 85mm x 50mm
• Product weight: 138 gr

Package includes:

• 1 x Bluetooth Mouse
• 1 x Nano receiver
• 1 x USB-C charging cable
• 1x User manual

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC RF exposure statement:

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.