Tellur Ritmo Bluetooth In-Ear Headphones
User Guide
Model: TLL511341
[Image: A pair of white wireless Bluetooth in-ear headphones with a charging cable, set against a subtle background of trees and grass.]
INTO YOUR FUTURE
Characteristics
- Bluetooth version
- v5.0
- Wireless range
- 10 m
- Frequency
- 2.4GHz, Class 2
- Supported profiles
- HSP, A2DP, AVRCP
- Multipoint technology
- Yes
- Driver unit
- 10mm
- Frequency response
- 20-20kHz
- Sensitivity
- 95±3dB
- Impedance
- 16Ω±15%
- Music play time
- up to 8 hours
- Talk time
- up to 8 hours
- Standby time
- up to 200 hours
- Charge time
- up to 1.5 hours
- Volume control
- Yes
- Cord length
- 55.5cm
- Input
- Micro-USB
- Bluetooth pairing name
- Tellur Ritmo
Pairing
- Make sure the headphones and your Bluetooth device are next to each other (within 1m).
- Press and hold the multifunction button for 3s to bring the headphones into pairing mode, indicated by the LED indicator flashing blue and red alternately.
- Activate Bluetooth function on your phone and search for the nearby Bluetooth connection "Tellur Ritmo".
- Once connected, the blue LED will flash once every 5s.
Charging
- Connect the charging port with any USB charging adapter or active computer USB port.
- Charging will start automatically with the LCD indicator turning red.
- The headphones are fully charged when the LED indicator is off.
Multipoint
This feature allows connection to two Bluetooth devices simultaneously.
- Use the pairing operation to connect with Phone A, then turn off the Ritmo headphones.
- Turn on the Ritmo headphones again to go into pairing mode and repeat the pairing steps to connect with Phone B.
- Then turn off the Ritmo headphones again.
- Finally, turn on the Ritmo headphones (without entering pairing mode); they will connect with Phone A and Phone B automatically.
[Diagram: A visual representation showing two separate devices (e.g., smartphones) establishing wireless connections to a single set of headphones.]
Function Operation
| Action | Operation |
|---|---|
| Power ON/OFF | Press and hold the Multifunction button for 5s. |
| Play/Pause | Press the Multifunction button. |
| Volume +/- | Press the Volume+/- button. |
| Play Next/Previous Track | Press and hold the Volume+/- button for 2s. |
| Answer Phone Call | Press the Multifunction button. |
| Hang Up Call | Press the Multifunction button for 2s. |
| Reject Phone Call | Press the Multifunction button for 2s. |
| Redial Last Number | Press the Multifunction button twice. |
| Enter Pairing Mode | When the headphone is Off, press the Multifunction button for 3s. |
| Activate Siri | Press and hold the Multifunction button for 3s. |
LED Indicator Status
| Status | Description |
|---|---|
| Solid red | Charging |
| Flashes blue and red alternately | In pairing mode |
| Flashes blue and red alternately | Disconnected from Bluetooth device |
| Flashes blue once every 5s | Paired with a Bluetooth device |
Disposal and Recycling Information
The crossed-out wheeled-bin symbol [wheel-bin-symbol] on your product, battery, literature, or packaging reminds you that all electronic products and batteries must be taken to separate waste collection points at the end of their working lives. They must not be disposed of in the normal waste stream with household garbage.
It is the responsibility of the user to dispose of the equipment using a designated collection point or service for separate recycling of electrical and electronic equipment waste (WEEE) and batteries according to local laws. Proper collection and recycling of your equipment helps ensure EEE waste is recycled in a manner that conserves valuable materials and protects human health and the environment. Improper handling, accidental breakage, damage, and/or improper recycling at the end of its life may be harmful to health and the environment.
