Instructions for EMERSON models including: Lumity, Cooking Oil Tester, Lumity Cooking Oil Tester

305411833@qq.com

Probe Replacement Instruction

Probe Replacement Instruction 1：Take out the device 2：Rotate and pull down the silicone cap along the front of the probe

File Type pdf Probe Replacement- Lumity Cooking Oil Tester

Replacing the Lumity Cooking Oil Tester's Probe Element

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized
• Document:
  • Text

File Info : application/pdf, 7 Pages, 808.20KB

Probe Replacement Instruction
1Take out the device
2Rotate and pull down the silicone cap along the front of the probe

3Use a Phillips screwdriver to loosen the two screws here

4Gently pull out the probe rod in the vertical direction until you see the cable terminal

5Lift the white flip cover of the cable terminal to ninety degrees, and gently pull out the cable

6Insert the cable into the terminal according to the color shown in the figure, and press down the white cable terminal

7Insert the probe into the handle and fix it with screws

8Pull up the silicone cap to its original position