User manual: Tuya smart

Wiring diagram

NOTE: The numbering of the switches are read from right to left.

Live out to the lights:

• Yellow wire → Light 1
• Blue wire → Light 2
• White wire → Light 3
• Orange wire → Light 4

Diagram Description: The wiring diagram shows the internal connections of the switch module. Terminals are labeled LIVE and NEUTRAL. Wires are connected to these terminals. A separate visual shows a switch panel with four buttons, numbered 1, 2, 3, and 4 from right to left.

Setup Instructions

Step 1: Power On and Pairing Mode

Before connecting the device to the app, power it on. Check if a blue LED is flashing from the Wi-Fi switch module. If there is no blue light, locate the reset button on the module. Press and hold the button for 5 seconds until the blue light flashes, indicating pairing mode.

Visual Description: An illustration of the Wi-Fi switch module with an arrow pointing to the 'Reset button'.

Step 2: Add Device in App

After confirming a flashing blue light, open the Smart Life or Tuya Smart app. Press the [+] icon to add the device.

Visual Description: A screenshot snippet of the app interface showing a [+] icon to add a device.

Step 3: Device Discovery

Once you have tapped "add devices", the Wi-Fi switch module should be automatically detected. Tap the blue [Add] button.

Visual Description: A screen indicating 'Discovering devices...' with a button labeled '[Add]' for the detected device.

Step 4: Wi-Fi Network Configuration

The app will prompt you to enter your Wi-Fi network name (SSID) and password. You may skip subsequent steps if this process is successful.

Visual Description: A form titled 'Enter Wi-Fi Information' with fields to choose Wi-Fi and enter a password, showing 'HTECH' as an example network.

Step 5: Select Device Type (if needed)

If your mobile device does not support Bluetooth or the device is not automatically detected, scroll down the list of smart devices offered by Tuya. Navigate to the "Electrical" category and select "Switch (Wi-Fi)".

Visual Description: A visual representation of Tuya's device categories, showing 'Electrical' with sub-options like 'Power Strip' and 'Switch (Wi-Fi)'.

Step 6: Confirm Indicator Light

Confirm that the indicator light on the device is rapidly blinking. Proceed to the next step to pair the device with your Smart Home.

Visual Description: An image of a smart home device with a blinking indicator light.

Step 7: Device Pairing

The device will pair with your application. The device should be added within 2 minutes. If pairing fails, verify your Wi-Fi details and ensure the blue LED is flashing rapidly.

Visual Description: A 'Connecting Device' screen showing a progress indicator and a timer displaying '01:56'.

Step 8: Confirm Connection

When the smart device appears in pairing mode, tap "Add" and confirm your Wi-Fi network details. For instructions on renaming the device and switches, refer to the provided link [click here].

Step 9: Test the Device

Once your device has been successfully added, test its functionality. Open your smart app, switch on a connected light, and then manually switch it off.

Warranty

WARRANTY POLICY for REPLACEMENTS

Should any product 'fail' within the first 3 months of purchase, it may be returned for either a repair or replacement. Request the standard 'PostNet to PostNet' service from your nearest PostNet branch.

For more details regarding the return policy, [Click Here]

IMPORTANT! Warranty Void If:

• Goods are not in original packaging & are complete with all original components.
• Goods show signs of damage due to abusive usage.
• Goods show signs of physical alteration.
• Goods show signs of physical damage.
• Goods show signs of tampering.
• Signs of power spike damage.
• Signs of water damage (besides waterproof products).