User manual Tuya smart

Wiring diagram

The wiring diagram illustrates the connection points on the rear of the Smart Wi-Fi Mechanical Wall Socket. Terminals are clearly labeled:

• Live: Connected via a red wire.
• Neutral: Connected via a black wire.
• Earth: Connected via a green wire.

An accompanying image shows a separate earth wire, featuring green and yellow insulation on one end, ready for connection.

Setup Guide

Step 1: Power On and Pairing Mode

Before connecting the device to the app, power it on. Observe the Wi-Fi switch module for a flashing blue LED. If no blue light is visible, locate and press the reset button found on the module for 5 seconds until the blue light begins to flash.

Image description: A Wi-Fi switch module with a reset button highlighted.

Step 2: Add Device in App

Once a flashing blue light is confirmed, open the Smart Life or Tuya Smart application on your mobile device. Tap the '+' icon to initiate the process of adding a new device.

Image description: A smartphone screen displaying the app interface with the '+' icon for adding a device prominently highlighted.

Step 3: Device Discovery

After selecting 'add devices', the Wi-Fi switch module should be automatically detected by the app. Tap the blue 'Add' button. The application will then search for nearby devices, confirming that your device has entered pairing mode.

Image description: An app screen indicating "Discovering devices..." with an 'Add' button available.

Step 4: Wi-Fi Network Information

The application will prompt you to enter your Wi-Fi network name (SSID) and password for the device to connect. If this connection is successful, you may be able to skip subsequent steps.

Image description: A "Enter Wi-Fi Information" screen requesting Wi-Fi network and password details, showing "HTECH" as the connected network.

Step 5: Select Device Type (if Bluetooth not supported)

If your mobile device does not support Bluetooth connectivity, scroll through the list of smart devices offered by Tuya. Navigate to the 'Electrical' category and select 'Switch (WiFi)'.

Image description: A visual representation of Tuya's smart device categories, with 'Electrical' selected and 'Switch (WiFi)' highlighted within the 'Switch' sub-category.

Step 6: Confirm Indicator Light

Verify that the device's indicator light is blinking rapidly. Proceed to the next page, which will guide you through pairing the device with your Smart Home system.

Image description: A note advising to press and hold the RESET button for 5 seconds until the indicator blinks, referencing the user manual for specifics.

Step 7: Device Pairing Process

The device will now pair with your application. It is expected to be added within 2 minutes. If the pairing process fails, re-check your Wi-Fi details and confirm that the blue LED on the device is flashing rapidly.

Image description: A "Connecting Device" screen displaying a progress indicator and a timer showing "01:56".

Step 8: Confirm Wi-Fi Connection Details

When the smart device appears in pairing mode within the app, tap 'Add' and confirm your Wi-Fi network details. For instructions on how to rename the device and its associated switches, please refer to the provided link.

Image description: Another "Enter Wi-Fi Information" screen, similar to the one in Step 4, for confirming network credentials.

Step 9: Test Device Functionality

Once your device has been successfully added, it is time to test its operation. Open your smart app, switch on the connected light, and then manually switch it off to confirm functionality.

Warranty

WARRANTY POLICY for REPLACEMENTS

Should any product 'fail' within the first 3 months of purchase, it may be returned to Henrac Tech for either a repair or replacement. Please request the standard 'PostNet to PostNet' service from your nearest PostNet branch. For more details regarding our return policy, please follow the provided link.

IMPORTANT! Warranty void if:

1. Goods are not in original packaging and are complete with all original components.
2. Goods show signs of damage due to abusive usage.
3. Goods show signs of physical alteration.
4. Goods show signs of physical damage.
5. Goods show signs of tampering.
6. Signs of power spike damage.
7. Signs of water damage (unless the product is waterproof).