KitchenAid French Door Bottom Mount Refrigerator with Ice Dispenser (KRFC704F, KRFC604F)
Product Dimensions
A line drawing of a French door refrigerator with various dimensions labeled A through I, indicating overall height, cabinet height, depths with doors/drawers open, depths with/without handles, cabinet depth, and widths with/without doors open.
| Description | Dimensions |
|---|---|
| Overall Height | 71⁷⁄₈" (182.6 cm) |
| Height to top of cabinet | 70⁷⁄₈" (180.0 cm) |
| Depth with doors open 90° | 43¾" (111.1 cm) |
| Depth with drawer open | 45⁷⁄₈" (116.5 cm) |
| Depth with handles | 31½" (80.0 cm) |
| Depth without handles | 28⁷⁄₈" (73.3 cm) |
| Depth of cabinet only | 24³/₈" (61.9 cm) |
| Width of cabinet | 35⁵⁄₈" (90.5 cm) |
| Width with door open 90° | 43⁵⁄₈" (110.8 cm) |
Electrical Requirements
WARNING: Electrical Shock Hazard
Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock.
Electrical: A 115 V, 60 Hz AC only, 15 A or 20 A fused, grounded electrical supply is required. It is recommended that a separate circuit serving only your refrigerator be provided. Use an outlet that cannot be turned off by a switch. Do not use an extension cord.
Water: A cold water supply with water pressure between 35 psi and 120 psi (241 kPa and 827 kPa) is required to operate the water dispenser and ice maker. If you have questions about your water pressure, call a licensed, qualified plumber.
NOTE: If the water pressure is less than what is required, the flow of water from the water dispenser could decrease or ice cubes could be hollow or irregularly shaped.
Reverse Osmosis Water Supply: The pressure of the water supply coming out of a reverse osmosis system going to the water inlet valve of the refrigerator needs to be between 35 psi and 120 psi (241 kPa and 827 kPa). If a reverse osmosis water filtration system is connected to your home cold water supply, the water pressure to the reverse osmosis system needs to be a minimum of 40 psi to 60 psi (276 kPa to 414 kPa).
Location Requirements
WARNING: Explosion Hazard
Keep flammable materials and vapors, such as gasoline, away from refrigerator. Failure to do so can result in death, explosion, or fire.
IMPORTANT: This refrigerator is designed for indoor and household use only. To ensure proper ventilation for your refrigerator, allow for a 3/16" (0.48 cm) space on each side and 1/4" (0.64 cm) space at the top. Allow for a 1" (2.54 cm) space behind the refrigerator. If your refrigerator has an ice maker, allow extra space at the back for the water line connections.
A diagram illustrating recommended clearances around the refrigerator. It shows 1/4 inch (0.64 cm) clearance at the top, 3/16 inch (0.48 cm) clearance on each side, and 3 3/4 inches (9.5 cm) clearance from a fixed wall to allow the door to swing open.
When installing your refrigerator next to a fixed wall, leave a 3 3/4" (9.5 cm) minimum space between the refrigerator and the wall to allow the door to swing open.
NOTE: This refrigerator is intended for use in a location where the temperature ranges from a minimum of 55°F (13°C) to a maximum of 110°F (43°C). The preferred room temperature range for optimum performance, which reduces electricity usage and provides superior cooling, is between 60°F (15°C) and 90°F (32°C). It is recommended that you do not install the refrigerator near a heat source, such as an oven or radiator.
Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice. Dimensions are for planning purposes only. For complete details, see Installation Instructions packed with product. Specifications subject to change without notice.
