Tribit FlyBuds 3mini True Wireless Earbuds
Model: BTH98
Package Contents
The package includes: Earbuds (Left/Right) with Charging Case, 2 Pairs of Ear Tips, User Manual, and a USB-C Charging Cable. [Diagram showing these items.]
Product Parts
Key components of the Tribit FlyBuds 3mini:
- 1. Charging Contacts
- 2. Charging Case
- 3. Charging Case Indicator Light
- 4. Earbud Indicator Light
- 5. Touch Area
- 6. Ear Hooks
- 7. Microphone
- 8. Silicone Ear Tips
- 9. USB-C Charging Port (back)
[Diagram illustrating these parts.]
Power ON / Power OFF
To power on, open the charging case. To power off, place the earbuds back into the charging case and close it. Ensure the insulating tab is removed before first use. [Illustrations of the power process.]
Bluetooth Connection Instructions
Connect the earbuds to a Bluetooth device
Open the charging case or remove the earbuds; they will automatically enter pairing mode. For first-time use, enable Bluetooth on your device, search for 'Tribit FlyBuds 3mini', and connect. Subsequent connections are automatic to the last paired device. [Illustration of phone connecting to earbuds.]
Connect the earbuds with other devices
To pair with a new device, disconnect the current one or initiate pairing mode by clicking an earbud 4 times, then pressing and holding for 2 seconds. Note: If your device has a previous pairing record, delete it and search again to reconnect.
Button Functionality
- Play/Pause Music: Double-click on either earbud.
- Answer/End a Call: Double-click on either earbud.
- Next Track: Click 3 times on either earbud.
- Reject an Incoming Call: Press and hold for 2 seconds on the touch area of either earbud.
- Activate Voice Assistant: Press and hold the touch area of either earbud for approximately 2 seconds, then release when you hear a prompt tone.
[Illustration of earbud touch area.]
Earbud Indicator Light Instruction
- Bluetooth Pairing: The white indicator flashes slowly.
- Connection Successful: The white indicator turns off.
- Low Battery: The white indicator quickly flashes twice every 20 seconds.
Charging the Earbuds
Place the earbuds back into the charging case and close the cover to start charging. Full charging takes approximately 90 minutes.
Charging Case Indicator Light Instruction
When the charging case isn't charging:
- >10% Battery: The white indicator turns on.
- <10% Battery: The red indicator turns on.
When the charging case is charging:
- >15% Battery: The white indicator flashes slowly.
- <15% Battery: The red indicator flashes slowly.
After being fully charged (approx. 90 minutes), the white indicator glows steadily. [Diagram of charging case lights.]
Pairing the Left Earbud with the Right Earbud
If earbuds disconnect, triple-click the touch area on either earbud. The left earbud will flash white slowly, and the right will turn off, indicating successful re-pairing. Ensure earbuds are not connected to another device before pairing.
Technical Specifications
- Frequency band: 2402~2480MHz
- Maximum transmission power: -6 ~ +4dBm
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
IC Caution
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
Warnings
- Do not dismantle or modify the earbuds for any reason; otherwise, any malfunction is not covered by the warranty.
- Do not deliberately contact the earbuds with liquids, as this may damage them and invalidate the warranty.
- Do not place the earbuds in environments with temperatures that are too high or too low (above 45°C or below -20°C).
- This product contains a built-in lithium battery. It is forbidden to disassemble, bump, squeeze, or throw the product into fire.
- Keep the earbuds away from children to prevent accidental swallowing and other injuries.
Important Notes
- In a noisy environment, the voice from the earbuds may sound lower than the actual volume.
- Listening to music at high volume for extended periods may cause permanent hearing damage.
- Use the provided charging cable and a power adapter or computer to charge the earbuds. Ensure the adapter complies with national/regional regulations and international safety standards.
Declarations of Conformity
Thousandshores Deutschland GmbH declares that the radio equipment type [True Wireless Earbuds BTH98] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: http://files.tribit.com/bth98-eu-doc.pdf
Thousandshores Deutschland GmbH declares that the radio equipment type [True Wireless Earbuds BTH98] complies with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address: http://files.tribit.com/bth98-de-doc.pdf
Learn more about the UK Declaration of Conformity by downloading it from: http://files.tribit.com/bth98-uk-doc.pdf
