Tribit FlyBuds 3mini True Wireless Earbuds
Model: BTH98
Package Contents
- Earbuds (L / R) + Charging Case
- Ear Tips (2 Pairs)
- User Manual
- USB-C Charging Cable
A diagram shows the earbuds, charging case, ear tips, and charging cable, each labeled with a number corresponding to the list above.
Product Parts
The earbuds and charging case are illustrated with the following parts labeled:
- Charging Contacts
- Charging Case
- Charging Case Indicator Light
- Earbud Indicator Light
- Touch Area
- Ear Hooks
- Microphone
- Silicone Ear Tips
- USB-C Charging Port (back)
How to Replace the Ear Tips
A diagram shows different sizes of ear tips being attached to the earbuds.
How to Wear the Earbuds
A series of diagrams illustrate the correct way to insert and position the earbuds in the ear for a secure fit.
Power ON / Power OFF
To use the earbuds for the first time, peel off the insulating tab on the earbuds. Place them into the charging case and close the case.
- Power On: Open the charging case.
- Power Off: Put the earbuds back into the charging case and close the case.
Diagrams show the process of placing earbuds into the charging case and closing it.
Bluetooth Connection Instructions
Open the charging case or remove the earbuds from the case. The earbuds will automatically enter Bluetooth pairing mode.
For first-time use, activate the Bluetooth function on your device and search for Bluetooth-enabled devices. Select the device named “FlyBuds 3mini” to start the connection. The earbuds will automatically connect to the last connected device.
To connect to other devices:
- Disconnect the currently connected Bluetooth device. The earbuds will automatically enter Bluetooth pairing mode.
- Click either earbud 4 times. The white indicator will glow steadily. Within 5 seconds, press and hold the earbud for 2 seconds. The white indicator will change to a slow flashing, indicating the earbuds have entered Bluetooth pairing mode.
Note: If your device has a pairing record, delete the pairing record and search for the earbuds to reconnect.
A diagram shows a smartphone connecting to the earbuds via Bluetooth.
Button Functionality
- Play/Pause Music: Double-click on either earbud.
- Answer/End a Call: Double-click on either earbud.
- Next Track: Click 3 times on either earbud.
- Reject an Incoming Call: Press and hold for 2s on the touch area of either earbud.
- Activate the Voice Assistant: Press and hold the touch area of either earbud for approximately 2 seconds and release it when you hear a prompt tone.
A diagram illustrates the touch area on the earbud.
Earbud Indicator Light Instruction
- Bluetooth Pairing: The white indicator flashes slowly.
- Connection Successful: The white indicator turns off.
- Low Battery: The white indicator quickly flashes twice every 20 seconds.
Charging the Earbuds
Put the earbuds back into the charging case and close its cover to start charging. It takes about 90 minutes to get the earbuds fully charged.
Charging Case Indicator Light Instruction
When the charging case isn't in the charging state:
- >10%: The white indicator turns on.
- <10%: The red indicator turns on.
When the charging case is in the charging state:
- >15%: The white indicator flashes slowly.
- <15%: The red indicator flashes slowly.
After being fully charged (in about 90 minutes): The white indicator glows sturdily.
A diagram shows the charging case with indicator lights.
Pairing the Left Earbud with the Right Earbud
If the left and right earbuds become disconnected, click the touch area of either earbud 3 times. The white indicator will flash quickly, and a few seconds later, the left earbud indicator will flash slowly in white while the right earbud indicator will turn off, indicating the two earbuds have been connected successfully.
Note: Before pairing the left and right earbuds, ensure that the earbuds are disconnected from the device.
Frequency Band & Maximum Transmission Power
- Frequency band: 2402~2480MHz
- Maximum transmission power: -6 ~ +4dBm
Warning
- Do not dismantle or modify the earbuds for any reason; otherwise, any malfunction of the earbuds is not covered by the warranty.
- Do not deliberately contact the earbuds with liquids, as this may damage the earbuds and invalidate the warranty.
- Do not place the earbuds in environments with temperatures that are too high or too low (above 45°C or below -20°C).
- This product contains a built-in lithium battery. Do not disassemble, bump, squeeze, or throw the product into fire.
- Keep the earbuds away from children to avoid accidental swallowing and other injuries.
Important Notes
- In a noisy environment, the voice from the earbuds will sound lower than the actual volume.
- Listening to music at a high volume for a long time may cause permanent hearing damage.
- Please use the provided charging cable and a power adapter or computer to charge the earbuds. When charging, only use adapters that comply with national/regional regulations and international/regional safety standards.
Declarations of Conformity
Hereby, [Thousandshores Deutschland GmbH] declares that the radio equipment type [True Wireless Earbuds BTH98] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: http://files.tribit.com/bth98-eu-doc.pdf
Thousandshores Deutschland GmbH declares that the radio equipment type [True Wireless Earbuds BTH98] complies with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address: http://files.tribit.com/bth98-de-doc.pdf
Learn more about the UK Declaration of Conformity. Please click the link below to download: http://files.tribit.com/bth98-uk-doc.pdf
