Introduction
This document serves as a user manual for the Smart Watch, providing comprehensive guidance on its features, operation, and maintenance.
Water Resistance
The product is water-resistant up to an IP67 rating, making it safe to wear during activities like handwashing or when caught in light rain.
Caution: Avoid using it during hot showers, baths, or in saunas, as the steam can penetrate the device and harm or deteriorate internal components. Such damages are not covered by the warranty.
Operation Guide
Power: Long press to switch ON/OFF the watch.
Screen: Press to wake the screen or turn it off.
Charging Instruction
This product uses magnetic charging. Align the charging point with the device's charging pins on the back, and it will begin charging on its own.
It's compatible with a PC USB or a standard 5V/1A charger.
Caution: Avoid allowing the two pins of the magnetic charging cable to touch a conductive material simultaneously, as this can lead to a short circuit.
Please fully charge the watch before using it for the first time. If the charging icon does not appear, please keep charging for 10 minutes. Press and hold for more than 3 seconds to start.
To charge your device, plug the charging cable into the adapter or USB port on your computer.
Downloading the App
Scan the following QR code, download and install the App. [QR Code Placeholder]
Scan QR Code and Download
Pairing
Follow these steps to pair your watch with the companion app:
- Open the App and set up your profile.
- Go to the 'Device' section, then click 'Add a Device'.
- Choose your device from the scanning list.
- Finish the pairing process.
The MAC address found on the "Setting" > "System info" page can help you identify your device on the scanning list.
After the watch is bound successfully, it will automatically connect with the mobile phone every time the app is opened in the future. Data can be synchronized from the drop-down menu on the client data page.
Use the Touch Screen
On the Main Page:
- Swipe Up / Down to navigate to the main menu page.
- Swipe Left / Right to go back to the previous screen.
Smartwatch Features
Data Tracking
It displays the step number, distance, and calories for the current day. You can set goals for step number, distance, and calories within the App.
Sleep Monitoring
If you wear the Smart Watch during sleep, it can provide data on hours slept and sleep quality on both the watch screen and the App. The device will recalculate data information for the new day.
Heart Rate Monitoring
The Smartwatch can record your heart rate throughout the day. You can also tap on the relevant screen to start measuring your heart rate.
Workout Tracking
Tap the workout icon on the menu to start a new training measure recording. The last recorded workout will be shown on the training page.
Blood Pressure
Tap the blood pressure icon to start measuring your blood pressure. The blood pressure page can display the blood pressure measured data from the last time.
Blood Oxygen
Tap the blood oxygen icon to start measuring your blood oxygen. The blood oxygen page can display the blood oxygen measured data from the last time.
Weather
The weather page displays the current and tomorrow's weather information. Weather data is synced after connecting with the App and will not be updated after a long disconnect.
Messages
Open information pushes on the App, and the watch can receive corresponding messages. It can store up to the last 15 messages. You can switch incoming notifications on or off in the App.
Remote Camera
After connecting the device, you can use it to remotely control the camera on your phone.
Music Player Controller
Keep the watch connected to the App to control the pause and start functions of your mobile phone's music player, as well as song switching.
Alarm Clock
Keep the watch connected to the App to set a single alarm clock or a cyclic alarm clock. You can set up to 5 alarm clocks. The device will vibrate when an alarm goes off.
Remind to Move
The device will vibrate to remind you to move after 1 hour of sitting. Note: You can switch this feature on or off in the App.
Stopwatch
Tap the start button on the stopwatch page to begin timing, and tap the stop button to stop timing.
Settings
Settings include options for menu style, screen display, battery information, language, password, QR code access, system updates, and more.
Attention
A. Avoid charging when there are water spots present.
B. This product is an electronic monitoring device and should not be used for medical purposes. The data provided is solely for informational purposes.
C. Do not wear this device when bathing or swimming, or in saunas.
D. Use the provided charging cable for charging.
FAQs
1. Why the watch cannot be found in the App?
A. When the Bluetooth on the watch is not found by the mobile phone during a Bluetooth search, the Bluetooth on the watch may be off. Please turn the Bluetooth on and off on the watch, then turn it on again on the mobile phone, and search and connect the Bluetooth after about one minute.
B. The GPS positioning function on the mobile phone must be turned on. In the "Setup" section on the mobile phone using the Android operating system, ensure you allow the App to obtain positioning authority.
2. Why the watch cannot receive reminders?
A. Confirm that the message push switch is turned on in the mobile app.
B. Ensure that the notification message can be displayed normally in the notification column of the mobile phone. You may need to find the notification settings in your mobile phone's settings and turn on the notification switches for WeChat, QQ, phone, SMS, and other mobile clients.
Android settings example: Open app → other settings → auxiliary functions → open app notifications.
IOS settings example: Open: mobile phone settings → notification → WeChat, QQ, SMS, phone → allow notification → display in "Notification center".
C. For WeChat: Open WeChat → Me → Settings → New message notification → Open notification to display message details.
D. For QQ: Open QQ → settings → message notification → open notification, display message content.
